23.060.30 闸阀 标准查询与下载

KS B 2319-2021 黄铜锻件螺纹闸阀

Brass forging stock screwed gate valves

KS V 7823-2021 造船 铸铁阀门

Shipbuilding－Cast iron valves

GSO EN 12288:2021 工业阀门 铜合金闸阀

This European Standard applies to copper alloy gate valves for general use having flanged, threaded, capillary, compression or loose nut/union body ends. This European Standard specifies the design and performance requirements including materials, pressure/temperature ratings, dimensions, test procedures and marking. For some specific fields of application, for example, drinking water or gas, valves to this European Standard can be used provided the requirements of the relevant performance standards are met. Approval by the relevant regulatory body may be required. The range of nominal sizes is DN 8 to DN 500 and of nominal diameters is 8 mm to 110 mm. The range of pressure designations covered is PN 6 ; PN 10 ; PN 16 ; PN 20 ; PN 25 ; PN 32 ; PN 40 ; PN 63 ; Class 150 and Class 300. For the applicability of each nominal size/diameter and each pressure designation to the different types of valve end, see 4.1.

Industrial valves -- Copper alloy gate valves

DIN 86720:2021 带螺纹阀盖和法兰的炮铜平面闸阀，DN 20 至 DN 100，PN 16

The document specifies gate valves for use in piping systems on ships.

Gate valves flat sided of gun metall with screwed bonnet and flanges, DN 20 to DN 100, PN 16

DIN 86266:2021 船舶和海洋技术 用于超轻型对夹式和法兰式法兰的蝶阀 DN 50 至 DN 125，PN 10

This standard specific single exentric soft sealing butterfly valves for extra light duty of water type and flanged type.

Ships and marine technology - Butterfly valves for flanges extra light duty wafer type and flanged type - DN 50 to DN 125, PN 10

T/ZZB 2066-2021 刀形闸阀

本文件规定了刀形闸阀的术语和定义、结构型式、分类和基本参数、基本要求、技术要求、试验方法、检验规则、标志、供货要求及质量承诺。 本文件适用于公称压力PN2.5～PN16、Class150，公称尺寸DN50～DN1200、NPS2～NPS48，工作温度0 ℃～200 ℃，工作介质为液体、固体颗粒、纤维、纸浆或粉末等介质的刀形闸阀。 本文件不适用于灰渣系统。

Knife gate valves

BS ISO 6002:2021 工业阀门. 用螺栓连接阀盖的钢制闸阀

Industrial valves. Bolted bonnet steel gate valves

ISO 6002:2021 工业阀门. 用螺栓连接阀盖的钢制闸阀

This document specifies the requirements for bolted bonnet steel gate vales having the following features: — bolted bonnet; — outside screw and yoke; — inside screw (alternative for PN 10, PN 16, Class 150, PN 25 and PN 40 only); — single or double obturator; — wedge or parallel seating; — with or without non-metallic obturator or seat seals; — flanged or butt-welding ends. It covers valves of the nominal sizes DN: — 10; 15; 20; 25; 32; 40; 50; 65; 80; 100; 125; 150; 200; 250; 300; 350; 400; 450; 500; 600; 700; 800; 900; 1000; corresponding to nominal pipe sizes NPS: — ⅜; ½; ¾; 1; 1 ¼; 1 ½; 2; 2 ½; 3; 4; 5; 6; 8; 10; 12; 14; 16; 18; 20; 24; 28; 32; 36; 40; and applies to valves of the following pressure designations: — PN 10; 16; 25; 40; 63; 100; — Class 150; 300; 600. This document applies to bolted bonnet steel gate valves used for all industrial applications. Additional requirements given in the relevant application standards can apply to bolted bonnet steel gate valves used for more specific applications (e.g. for the water industry, the chemical and petrochemical process industry, the oil and gas industry).

Industrial valves - Bolted bonnet steel gate valves

GOST R 59718-2021 石油和石油产品的干线管道运输 储罐设备 仪表舱口 一般规格

Trunk pipeline transport of oil and oil products. Storage tank equipment. Gauge hatch. General specifications

T/ZZB 1935-2020 大口径暗杆楔式闸阀

本文件规定了大口径暗杆楔式闸阀的术语和定义、结构型式、分类及基本参数、基本要求、技术要求、试验方法、检验规则、标志、包装、运输及贮存和质量承诺。 本文件适用于公称压力PN10～PN150、公称尺寸DN350～DN1 200（或压力等级Class150～Class900、公称尺寸NPS14～NPS48）、适用温度-46 ℃～550 ℃、使用介质为油、水、蒸汽的大口径暗杆楔式闸阀（以下简称暗杆闸阀）。 本文件不适用于电动轮操作方式的暗杆闸阀。

Large-diameter non-rising wedge gate valves

T/ZZB 1876-2020 工程机械用双向液压锁

本文件规定了工程机械用双向液压锁（以下简称液压锁）的术语和定义、基本要求、技术要求、性能试验、检验规则、标志和包装、运输和贮存要求、质量承诺。 本文件适用于以矿物油型液压油或性能相当的其他液体为工作介质的管式连接、板式连接的工程机械用双向液压锁。

Hydraulic dual pilot controlled check valve for construction machinery

JB/T 13878-2020 核电用非核级闸阀 技术条件

Technical conditions of non-nuclear grade gate valves for nuclear power

T/CGMA 041009-2020 铁制闸阀产品质量分等规范

本标准规定了铁制闸阀（以下简称闸阀）的产品质量等级、试验与检验方法、抽样和评定方法。 本标准适用于GB/T 12232、GB/T 24924、GB/T 32290、CJ/T 216标准规定的铁制闸阀。

Quality classification specification for iron gate valves

T/ZZB 1526-2020 波纹管密封钢制截止阀

本标准规定了波纹管密封钢制截止阀的结构形式、基本要求、技术要求、零部件材料、试验方法、检验规则、标志、供货要求和质量承诺。 本标准适用于公称压力PN16～PN250、公称尺寸DN15～DN400和公称压力Class150～Class1500、公称尺寸NPS1/2～NPS16, 使用温度-29 ℃～538 ℃，端部连接形式为法兰、对焊、承插焊和螺纹，阀体与阀盖的连接为螺栓连接、自密封连接和焊接连接的波纹管密封钢制截止阀（以下简称截止阀）。 波纹管密封钢制节流阀、波纹管密封钢制截止止回阀也可参照本标准执行。

Bellows sealing steel globe valve

KS V 7395-2019 船用青铜软管阀

Marine bronze hose valves

KS V 7396-2019 船用青铜16K截止阀（活接阀盖型）

Marine bronze 16 K globe valves(union bonnet type)

KS V 7392-2019 船用青铜16K角阀（活接阀盖型）

Marine bronze 16 K angle valves(union bonnet type)

BS EN ISO 16139:2006+A1:2019 工业阀门 热塑性材料闸阀

What is ISO 16139 —  Gate valves of thermoplastic materials about?    ISO 16139 specifies requirements for the design, functional characteristics and manufacturing of gate valves made of thermoplastics materials intended for isolating service, their connection to the pipe system, the body materials and their pressure/temperature rating between − 40 °C and + 120 °C, for a lifetime of 25 years, and also specifies their tests.   ISO 16139 is applicable to hand- or power-operated valves to be installed in industrial pipe systems, irrespective of the field of application and the fluids to be conveyed.   NOTE 1 Industrial pipe systems also include systems for water supply for general purposes, drainage and sewerage.  NOTE 2 Special requirements can apply to pipe systems for water for h...

Industrial valves. Gate valves of thermoplastics materials

EN ISO 16139:2006/A1:2019 工业阀.热塑性材料的门阀 包含修改件A1,2019

Industrial valves - Gate valves of thermoplastics materials - Amendment 1 (ISO 16139:2006/Amd 1:2019)

ISO 16139:2006/Amd 1:2019 工业阀门.热塑性材料闸阀.修改件1

Industrial valves — Gate valves of thermoplastics materials — Amendment 1