23.060.30 闸阀 标准查询与下载

DIN 3500:2012 民用给水的截止阀.活塞式闸阀.PN 10

Stop valves for domestic water supply - Piston type gate valves - PN 10

DIN EN 593:2012 工业阀门.金属蝶阀

Industrial valves - Metallic butterfly valves; German version EN 593:2009+A1:2011

ANSI/AWWA C561-2012 装配式不锈钢推拉门

This standard describes vertically-mounted fabricated stainless steel slide gates with full aperture closure, designed for either seating or unseating head, or both, in ordinary water supply and wastewater service. The gates are primarily used to shut off or throttle water or wastewater flow through a rectangular or round orifice, end of channel, or in-channel opening. They may be either conventional-closure or of flush-bottom-closure type and may open upward or downward.

Fabricated Stainless Steel Slide Gates

ANSI/AWWA C563-2012 预制合成滑动门

This standard describes vertically-mounted, fabricated composite, resilient-seated slide gates with full aperture closure, designed for either seating or unseating head, or both, in ordinary water supply and wastewater service. The gates are primarily used to shut off or throttle water and wastewater flow through a rectangular or round orifice, end of channel, or in-channel opening. They may be either conventional closure or of flush bottom-closure type and may be opened either upward or downward.

Fabricated Composite Slide Gates

ANSI/AWWA C562-2012 装配铝滑动门

This standard describes vertically-mounted fabricated aluminum slide gates with full aperture closure, designed for either seating or unseating head, or both, in ordinary water supply and wastewater service.. The gates are primarily used to shut off or throttle water or wastewater flow through a rectangular or round orifice, end of channel, or in-channel opening. They may be either conventional-closure or of flush bottom-closure type and may be opened upward or downward.

Fabricated Aluminum Slide Gates

GOST R 55020-2012 管道阀门.管道干线用刀闸阀.通用规格

Pipeline valves. Knife gate valves for trunk pipelines. General specifications

LST EN 593-2009+A1-2011 工业阀门 金属蝶阀

Industrial valves - Metallic butterfly valves

DIN EN 593:2011 工业阀门.金属蝶阀;德文版本EN 593-2009+A1-2011

Industrial valves - Metallic butterfly valves; German version EN 593:2009+A1:2011

NF E29-430:2011 工业阀门.金属蝶阀.

Industrial valves - Metallic butterfly valves.

EN 593:2009+A1:2011 工业阀门.金属蝶阀

This European Standard specifies requirements for butterfly valves having metallic bodies for use in flanged or butt welding piping systems and used for isolating, regulating or control applications. The PN and Class ranges are: PN 2,5; PN 6; PN 10; PN 16; PN 25; PN 40; Class 150; Class 300. The DN range is: DN 20; DN 25; DN 32; DN 40; DN 50; DN 65; DN 80; DN 100; DN 125; DN 150; DN 200; DN 250; DN 300; DN 350; DN 400; DN 450; DN 500; DN 600; DN 700; DN 750; DN 800; DN 900; DN 1000; DN 1200; DN 1400; DN 1600; DN 1800; DN 2000; DN 2200; DN 2400. DN 750 is used only for Class 150 and Class 300. For special application as industrial process control valves, see EN 1349 and EN 60534-2-1.

Industrial valves - Metallic butterfly valves

DIN EN 1984:2010 工业阀门.钢制闸阀.德文版本EN 1984-2010

This European Standard specifies the requirements for steel gate valves which are wrough, cast or fabricated with end connections flanged, butt welding, butt welding ,socket welding or threaded.

Industrial valves - Steel gate valves; German version EN 1984:2010

DIN EN 12288:2010 工业阀门.铜合金闸阀.德文版本EN 12288-2010

Industrial valves - Copper alloy gate valves; German version EN 12288:2010

LST EN 12288-2010 工业阀门-铜合金闸阀

Industrial valves - Copper alloy gate valves

LST EN 1984-2010 工业阀门 钢制闸阀

Industrial valves - Steel gate valves

DS/EN 12288:2010 工业阀门-铜合金闸阀

This European Standard applies to copper alloy gate valves for general use having flanged, threaded, capillary, compression or loose nut/union body ends.This European Standard specifies the design and performance requirements including materials, pressure/temperature ratings, dimensions, test procedures and marking.For some specific fields of application, for example, drinking water or gas, valves to this European Standard can be used provided the requirements of the relevant performance standards are met. Approval by the relevant regulatory body may be required.The range of nominal sizes is DN 8 to DN 500 and of nominal diameters is 8 mm to 110 mm.The rang

Industrial valves - Copper alloy gate valves

BS EN 12288:2010 工业用阀.铜合金闸阀

This European Standard applies to copper alloy gate valves for general use having flanged, threaded, capillary, compression or loose nut/union body ends. This European Standard specifies the design and performance requirements including materials, pressure/temperature ratings, dimensions, test procedures and marking. For some specific fields of application, for example, drinking water or gas, valves to this European Standard can be used provided the requirements of the relevant performance standards are met. Approval by the relevant regulatory body may be required. The range of nominal sizes is DN 8 to DN 500 and of nominal diameters is 8 mm to 110 mm. The range of pressure designations covered is PN 6; PN 10; PN 16; PN 20; PN 25; PN 32; PN 40; PN 63; Class 150 and Class 300. For the applicability of each nominal size/diameter and each pressure designation to the different types of valve end, see 4.1.

Industrial valves - Copper alloy gate valves

BS EN 1984:2010 工业阀门.钢闸阀

This European Standard specifies the requirements for steel gate valves which are wrought, cast or fabricated with end connections flanged, butt welding, socket welding or threaded. This European Standard is applicable to steel gate valves mainly used for industrial and general purpose applications. However they can be used for other applications provided the requirements of the relevant performance standards are met. The ranges of nominal sizes covered is: DN 8; DN 10; DN 12; DN 15; DN 20; DN 25; DN 32; DN 40; DN 50; DN 65; DN 80; DN 100; DN 125; DN 150; DN 200; DN 250; DN 300; DN 350; DN 400; DN 450; DN 500; DN 600; DN 700; DN 750; DN 800; DN 900; DN 1000. DN 750 is used for Class designated valves only. DN 8 and DN 12 are not used for flanged end connections. Socket welding end valves and threaded end valves are limited to the range DN 8 to DN 65. The range of pressure designations covered is: a) for flanged valves 1) PN 10; PN 16; PN 25; PN 40; PN 63; PN 100 2) Class 150; Class 300; Class 600 b) for butt welding end valves 1) PN 10, PN 16, PN 25, PN 40, PN 63, PN 100 2) Class 150, Class 300, Class 600 c) for socket welding end valves and threaded end valves 1) PN 10; PN 16; PN 25; PN 40; PN 63; PN 100 2) Class 600; Class 800

Industrial valves - Steel gate valves

DS/EN 1984:2010 工业阀门 钢制闸阀

This European Standard specifies the requirements for steel gate valves which are wrought, cast or fabricated with end connections flanged, butt welding, socket welding or threaded.This European Standard is applicable to steel gate valves mainly used for industrial and general purpose applications. However they can be used for other applications provided the requirements of the relevant performance standards are met.The ranges of nominal sizes covered is:DN 8; DN 10; DN 12; DN 15; DN 20; DN 25; DN 32; DN 40; DN 50; DN 65; DN 80; DN 100; DN 125; DN 150; DN 200; DN 250; DN 300; DN 350; DN 400; DN 450; DN 500; DN 600; DN 700; DN 750; DN 800; DN 900; DN 1000.DN

Industrial valves - Steel gate valves

EN 12288:2010 工业阀门.铜合金闸阀

This European Standard applies to copper alloy gate valves for general use having flanged, threaded, capillary, compression or loose nut/union body ends.This European Standard specifies the design and performance requirements including materials, pressure/temperature ratings, dimensions, test procedures and marking. For some specific fields of application, for example, drinking water or gas, valves toThis European Standard can be used provided the requirements of the relevant performance standards are met. Approval by the relevant regulatory body may be required. The range of nominal sizes is DN 8 to DN 500 and of nominal diameters is 8 mm to 110 mm. The range of pressure designations covered is PN 6; PN 10; PN 16; PN 20; PN 25; PN 32; PN 40; PN 63; Class 150 and Class 300. For the applicability of each nominal size/diameter and each pressure designation to the different types of valve end, see 4.1.

Industrial valves - Copper alloy gate valves

EN 1984:2010 工业阀门 钢制阀门

This European Standard specifies the requirements for steel gate valves which are wrought, cast or fabricated with end connections flanged, butt welding, socket welding or threaded.This European Standard is applicable to steel gate valves mainly used for industrial and general purpose applications. However they can be used for other applications provided the requirements of the relevant performance standards are met. The ranges of nominal sizes covered is: DN 8; DN 10; DN 12; DN 15; DN 20; DN 25; DN 32; DN 40; DN 50; DN 65; DN 80; DN 100; DN 125; DN 150; DN 200; DN 250; DN 300; DN 350; DN 400; DN 450; DN 500; DN 600; DN 700; DN 750; DN 800; DN 900; DN 1000. DN 750 is used for Class designated valves only. DN 8 and DN 12 are not used for flanged end connections. Socket welding end valves and threaded end valves are limited to the range DN 8 to DN 65. The range of pressure designations covered is: a) for flanged valves 1) PN 10; PN 16; PN 25; PN 40; PN 63; PN 1002) Class 150; Class 300; Class 600 b) for butt welding end valves 1) PN 10, PN 16, PN 25, PN 40, PN 63, PN 1002) Class 150, Class 300, Class 600 c) for socket welding end valves and threaded end valves 1) PN 10; PN 16; PN 25; PN 40; PN 63; PN 1002) Class 600; Class 800 NOTE 1 Socket welding end and threaded end valves are not normally manufactured with the pressure designations PN 10, PN 16, PN 25 and PN 40. NOTE 2 Class 800 is an intermediate class designation widely used for socket welding and threaded end valves.

Industrial valves - Steel gate valves