23.100.99 其他流体动力系统部件 标准查询与下载

JB/T 7374-2015 气动空气过滤器 技术条件

本标准规定了空气过滤器技术要求,试验方法,检验规则及标志、包装、贮存。 本标准适用于用物理方法去除主要污染物的空气过滤器。

Technical specification for pneumatic air filtering

GSO ISO 15217:2015 流体动力系统及其部件 -带接地触点的16毫米见方电连接器 -特性和要求

This International Standard specifies the following characteristics and requirements for a general-purpose, electrical-plug connector with two or three contacts plus earth, for use with solenoids: — the electrical characteristics of the connector; — the dimensions of the contacts; — the means of fixing the plug to the socket; — the sealing procedure between the plug and the socket; — usage requirements. The electrical-plug connector specified in this International Standard is intended to be used under working conditions such that the connector cannot be damaged by external action (for example, shock or excessive loading).

Fluid power systems and components -- 16 mm square electrical connector with earth contact -- Characteristics and requirements

GSO ISO/TR 10771-2:2015 流体液压能力承压金属壳体应变应力试验 第2部分：标准化方法

This part of ISO 10771 specifies a test method for fatigue rating of the pressure-containing envelopes of components used in hydraulic fluid power systems, as tested under steady internal cyclic pressure loads in accordance with ISO 10771-1. This part of ISO 10771 is only applicable to components whose failure mode is the fatigue of any element in the pressure-containing envelope, and that: — are manufactured from metals; — are operated at temperatures that exclude creep and low-temperature embrittlement; — are only subjected to pressure-induced stresses; — are not subjected to loss of strength due to corrosion or other chemical action; — can include gaskets, seals and other non-metallic components; however, these are not considered part of the pressure-containing envelope being tested (see note 3 of 5.5 of ISO 10771-1:2002). This part of ISO 10771 does not apply to piping as defined in ISO 4413 (i.e. connectors, hose, tubing, pipe). NOTE See ISO 19879, ISO 6803 and ISO 6605 for methods of fatigue testing of tube connectors, hoses and hose assemblies. This part of ISO 10771 establishes a general rating method that can be applied to many hydraulic fluid power components. In addition, EN 14359 has been developed for accumulators.

Hydraulic fluid power -- Fatigue pressure testing of metal pressure-containing envelopes -- Part 2: Rating methods

GSO ISO 6301-1:2015 气动流体动力 气动润滑剂 第1部分：供应商促销文献和产品标签要求中应包含的关键特性

This part of ISO 6301 specifies which characteristics of compressed-air lubricators are to be included in the supplier’s literature. It also specifies product-marking requirements for lubricators. This part of ISO 6301 applies to compressed-air lubricators constructed from light alloys (e.g. aluminium), zinc die cast alloys, brass, steel and plastic, with a rated pressure of 1 600 kPa (16 bar1)) and a maximum rated temperature of 80 °C.

Pneumatic fluid power -- Compressed-air lubricators -- Part 1: Main characteristics to be included in supplier's literature and product-marking requirements

GSO ISO 6952:2015 流体动力系统及其部件 带接地连接的两脚电插头 特性和要求

This International Standard specifies the following characteristics and requirements for a general purpose two-pin electrical plug connector with earth contact for use with a single solenoid: — the electrical characteristics of the connector; — the dimensions of the pins and earth contact; — the means for fixing the socket to the plug; — the sealing procedure between the plug and the socket; — usage requirements. The electrical plug connector specified in this International Standard is intended to be used under working conditions where the connector cannot be damaged by external action (for example, shock or excessive loading).

Fluid power systems and components -- Two-pin electrical plug connectors with earth contact -- Characteristics and requirements

GSO ISO 4400:2015 流体动力系统及其部件 三脚接地电插头连接器 特性和要求

This International Standard specifies the following characteristics and requirements for a general purpose three-pin electrical plug connector with earth contact for use with a single solenoid: — the electrical characteristics of the connector; — the dimensions of the pins and earth contact; — the means for fixing the socket to the plug; — the sealing procedure between the plug and the socket; — usage requirements. The electrical plug connector specified in this International Standard is intended to be used under working conditions where the connector cannot be damaged by external action (for example, shock or excessive loading).

Fluid power systems and components -- Three-pin electrical plug connectors with earth contact -- Characteristics and requirements

GSO ISO 6301-2:2015 气动流体动力 压缩空气润滑器 第2部分：确定供应商文献中包含的主要特性的测试方法

This part of ISO 6301 specifies tests, procedures and a method of presenting the results concerning the parameters that define the main characteristics to be included in the supplier’s literature of lubricators conforming to ISO 6301-1. This part of ISO 6301 can be applied — to facilitate the comparison of lubricators by standardizing test methods and presentation of test data; — to assist in the proper application of lubricators in compressed-air systems. The tests specified are intended to allow comparison between the different types of lubricators; they are not production tests to be carried out on each lubricator manufactured.

Pneumatic fluid power -- Compressed-air lubricators -- Part 2: Test methods to determine the main characteristics to be included in supplier's literature

GSO ISO 3939:2015 流体动力系统和部件 多唇形填料装置 堆叠高度测量方法

This International Standard specifies methods for measuring sealing devices having more than one seal in the set. The sets are composed of homogeneous and/or fabric-reinforced fluid power lip sealing rings of various configurations such as V, Y, U and W, with or without adapters. This International Standard also specifies methods for measuring stack height of multiple lip packing sets in order that both supplier and user can determine that the sets are to an acceptable dimensional standard. It is not the intention of this International Standard to specify the dimensions for packing sets or their components, since such dimensions depend on the material being used, on the section and on the type of design.

Fluid power systems and components -- Multiple lip packing sets -- Methods for measuring stack heights

GSO ISO 3722:2015 液压油容量 流体样品容器 清洁方法的鉴定和监控

This International Standard specifies a method for qualifying and controlling the cleaning methods for sample containers used in conjunction with contaminational analysis techniques on hydraulic fluids used in industrial, mobile, marine and aerospace hydraulic fluid power applications. It establishes a means for ensuring that the accuracy of particulate contamination analyses in hydraulic fluid power systems is not degraded by a lack of sample container cleanliness.

Hydraulic fluid power -- Fluid sample containers -- Qualifying and controlling cleaning methods

ISO 10771-1:2015 液压传动.金属压力容器外层的压力疲劳试验.第1部分:试验方法

This part of ISO 10771 specifies a method of fatigue testing the pressure-containing envelopes of components used in hydraulic fluid power systems under sustained steady cyclic internal pressure loads. This part of ISO 10771 is only applicable to component pressure-containing envelopes that — are manufactured from metals, — are operated at temperatures that exclude creep and low-temperature embrittlement, — are only subjected to pressure-induced stresses, — are not subjected to loss of strength due to corrosion or other chemical action, and — might include gaskets, seals, and other non-metallic components; however, these are not considered part of the pressure-containing envelope being tested (see 5.7). This part of ISO 10771 does not apply to piping as defined in ISO 4413 (i.e. connectors, hose, tubing, pipe). See ISO 6803 and ISO 6605 for methods of fatigue testing of piping devices. This part of ISO 10771 establishes a general test method that is applicable for many hydraulic fluid power components, but additional requirements or more specific methods that can be required for particular components are contained in the annexes or other standards. Test pressure is to be determined by the user. See ISO/TR 10771-2 for a possible rating method.

Hydraulic fluid power - Fatigue pressure testing of metal pressure-containing envelopes - Part 1: Test method

BS ISO 10771-1:2015 液压流体动力 金属承压外壳的疲劳压力测试 测试方法

Hydraulic fluid power. Fatigue pressure testing of metal pressure-containing envelopes. Test method

JB/T 12494-2015 热轧用除鳞喷嘴

本标准规定了热轧用除鳞喷嘴(以下简称喷嘴)的术语和定义、型式、标记、要求、试验方法、检验规则、标志、包装和贮存。本标准适用于以水为介质的热轧、热拔、热挤压、顶锻用除鳞喷嘴。

Descaling nozzle for hot rolling

JB/T 12493-2014 连铸用气水喷嘴

Air-water nozzle for continuous casting

JB/T 12493-2015 连铸用气水喷嘴

本标准规定了连铸用气水喷嘴(以下简称喷嘴)的术语和定义、分类、型号标记、要求、试验方法、检验规则、标志、包装和贮存。本标准适用于冶金行业的连铸二次冷却用气水喷嘴，尤其适用于特殊钢种连铸的二次冷却。

Air & water spraying nozzle for continuous casting

JB/T 12492-2014 连铸用水喷嘴

Continuous casting water nozzle

JB/T 12492-2015 连铸用水喷嘴

本标准规定了连铸用水喷嘴(以下简称喷嘴)的术语和定义、分类、型号标记、要求、试验方法、检验规则、标志、包装和贮存。本标准适用于冶金行业的连铸二次冷却用水喷嘴。

Water nozzle for Continuous casting

JB/T 12494-2014 热轧用除鳞喷嘴

Descaling nozzle for hot rolling

JB/T 9004-2015 限矩型液力偶合器 试验

本标准规定了限矩型（包括普通型）液力偶合器出厂试验及型式试验的试验方法和技术指标。 本标准适用于GB/T 5837规定的以矿物油、清水或难燃液为工作介质的限矩型（包括普通型）液力偶合器（以下简称液力偶合器）。

Load limiting type of constant filling fluid couplings.Test

JB/T 10372-2014 液压压力继电器

本标准规定了液压压力继电器(以下简称压力继电器)的型号、基本参数和标志、技术要求、试验方法、检验规则和包装等要求。本标准适用于以矿物油型液压油或性能相当的其他液体为工作介质的螺纹连接和板式连接的压力继电器。

Hydraulic fluid power.Pressure switch

JB/T 7375-2013 气动油雾器技术条件

本标准规定了油雾器技术要求、试验方法、检验规则及标志、包装和贮存。本标准适用于将润滑油雾化并注入压缩空气的油雾器。

Rules relating of pneumatic fluid power lubricators