23.100.99 其他流体动力系统部件 标准查询与下载

JB/T 14002-2020 气动真空发生器

Pneumatic vacuum generator

JB/T 13759-2019 转炉炼钢用氧枪

Oxygen lance for converter steelmaking

ISO 20145:2019 气动流体动力 - 测量排气消声器声发射压力水平的试验方法

This document specifies two methods of measuring the level of acoustic pressure at the outlet of an exhaust silencer: — the first method, called "steady-state mode”, is intended to evaluate the noise level under steady state flow, i.e. constant upstream pressure (steady-state test according to ISO 6358-1); and — the second method, called “discharge”, is intended to measure the noise level during the decrease of the pneumatic pressure (discharge test according to ISO 6358-2). This document is applicable to pneumatic exhaust silencers and devices designed to reduce the sound produced by discharges of compressed air, entering in the scope of application of ISO 6358-1 and

Pneumatic fluid power — Test methods for measuring acoustic emission pressure levels of exhaust silencers

ISO/TR 10946:2019 液压传动.带分离器的充气蓄能器.首选液压端口的选择

Hydraulic fluid power — Gas-loaded accumulators with separator — Selection of preferred hydraulic ports

ISO 6301-2:2018 气压传动.压缩空气润滑器.第2部分:确定供应商apos中包括的主要特性的试验方法；中国文学

This document specifies tests, procedures and a method of presenting the results concerning the parameters that define the main characteristics to be included in the supplier’s literature of lubricators conforming to ISO 6301-1. This document can be applied: — to facilitate the comparison of lubricators by standardizing test methods and presentation of test data; — to assist in the proper application of lubricators in compressed-air systems. The tests specified are intended to allow comparison between the different types of lubricators; they are not production tests to be carried out on each lubricator manufactured.

Pneumatic fluid power — Compressed-air lubricators — Part 2: Test methods to determine the main characteristics to be included in supplier's literature

T/ZZB 0818-2018 液压螺纹插装阀 三通电调制流量阀

本标准规定了三通电调制流量阀的术语和定义、基本要求、技术要求、试验方法、检验规则、产品标志、包装、运输、贮存和质量承诺。 本标准适用于液压系统中工作压力在24 MPa及以下，流量在114 L/min及以下的三通电调制流量阀。

Hydraulic screw-in cartridge valve Three-way electrical modulationg flow valve

JB/T 4235-2018 普通型、限矩型液力偶合器 易熔塞

Ordinary and torque-limiting hydraulic coupling fusible plugs

KS B ISO 3722-2017(2022) 液压传动－流体样品容器－合格和控制清洁方法

Hydraulic fluid power－Fluid sample containers－Qualifying and controlling cleaning methods

KS B ISO 3722-2017 液压传动液样容器清洗方法的鉴定和控制

Hydraulic fluid power－Fluid sample containers－Qualifying and controlling cleaning methods

KS B ISO 3722:2017 液压传动液样容器清洗方法的鉴定和控制

Hydraulic fluid power－Fluid sample containers－Qualifying and controlling cleaning methods

ISO 6301-1:2017 气压传动.压缩空气润滑器.第1部分:供应商apos中包含的主要特性；s的文献和产品标记要求

This document specifies which characteristics of compressed-air lubricators are to be included in the supplier’s literature. It also specifies product-marking requirements for lubricators. This document is applicable to compressed-air lubricators constructed from light alloys (e.g. aluminium), zinc die-cast alloys, brass, steel and plastic, with a maximum rated pressure of 1600 kPa (16 bar 1)) or less and a maximum rated temperature of 80 °C or less.

Pneumatic fluid power — Compressed-air lubricators — Part 1: Main characteristics to be included in supplier's literature and product-marking requirements

DIN EN 14359:2017-09 液压设备用充气式蓄能器;德文版本EN 14359-2017

This Standard specifies the requirements for materials, design, manufacture, testing inspection, safety systems and documentation (including instructions for first operation), for commonly-used types of gas-loaded accumulators and gas bottles for fluid power applications

Gas-loaded accumulators for fluid power applications; German version EN 14359:2017

PR NF E44-602-2017 动态搅拌器 水动力性能评估

Dynamic agitators - Hydrodynamic performance evaluation

BS EN 14359:2017 用于流体动力应用的气体加载蓄能器

Gas-loaded accumulators for fluid power applications

JB/T 13140-2017 转炉煤气干法除尘蒸发冷却塔用喷枪

Spray gun for converter gas dry dust removal evaporative cooling tower

EN 14359:2017 液压设备用充气式蓄能器

This European Standard specifies the requirements for materials, design, manufacture, testing inspection, safety equipment configuration and documentation (including instructions for first operation), for commonly-used types of gas-loaded accumulators and pressure vessels used to provide additional gas capacity for fluid power applications. This European Standard applies to the following types of components, defined as the pressure-containing envelope of gas-loaded accumulators:- bladder type; - diaphragm type; - piston type; - transfer type; - pressure vessels used to provide additional gas capacity. They consist of one or several parts joined together by a variety of mechanical means and by welding. This European Standard applies to gas-loaded accumulators which operate with the following conditions; - subject to an internal gauge pressure greater than 0,5 bar; - working temperature not lower than -50 °C and not higher than +200 °C; - containing all liquids and gases as defined in the Pressure Equipment Directive 2014/68/EU. NOTE When the accumulator contains Group 1 liquids or gases, consideration relating to risks other than those required by Pressure Equipment Directive 2014/68/EU are not covered by this European Standard and will be assessed separately.

Gas-loaded accumulators for fluid power applications

GSO ISO 10946:2016 液压流体动力 带分离器的气体加载蓄能器 首选液压端口的选择

This International Standard specifies the types and selection of hydraulic ports of gas-loaded accumulators with separator, which are used in hydraulic fluid power systems.

Hydraulic fluid power -- Gas-loaded accumulators with separator -- Selection of preferred hydraulic ports

JB/T 12956-2016 转炉炼钢用氧枪喷头

Oxygen lance nozzle for converter steelmaking

DIN 24339:2016 液压流体动力. 公称尺寸为63至2000的钢制储液器. 尺寸, 要求和试验

Hydraulic fluid power - Reservoirs made of steel, nominal sizes 63 to 2 000 - Dimensions, requirements, testing

JB/T 12705-2016 气动消声器

本标准规定了气动消声器(以下简称消声器)的术语和定义、分类、连接尺寸、技术要求、试验方法、外观质量、检验规则、标识、包装、贮存和标注说明。 本标准适用于工作压力不超过1 MPa，工作温度不高于60℃，安装在压缩空气回路的排气口上以降低排气噪声等级的气动消声器。

Pneumatic silencers