25.100.01 切削工具综合 标准查询与下载

T/SHDSGY 018-2022 熔融沉积3D打印机技术条件

本文件规定了熔融沉积3D打印机(以下简称“打印机”)的术语和定义、产品结构与主要参数、技术要求、试验方法、检验规则、标志、包装、运输与贮存。 本文件适用于使用以ABS、PC等工程塑料，PLA等生物降解材料，TPU弹性体等高分子材料及其复合材料为3D打印耗材的3D打印机。

Melting deposition 3D printer technical conditions

T/WLJC 94-2022 可转位刀片的齿轮滚刀技术规范

1 范围 2 规范性引用文件  3 术语与定义 4 结构型式 5 基本要求：设计要求 、材料要求、工艺和设备、检测设备 6 技术要求：外观和表面粗糙度、性能要求 、滚刀用刀片及零部件 7 检验规则  8 标志、包装、运输和贮存

Technical specification for gear hob with indexable insert

T/WLJC 121-2022 可转位齿轮滚刀技术规范

本标准规定了可转位齿轮滚刀的技术要求、检验要求、 标志、标签、随行附件、随行文件和包装要求。 本标准适用于加工模数 M6～M40渐开线齿轮的滚刀。

Technical specification for gear hob with indexable insert

T/ZS 0310-2022 金属加工用极压性润滑油

前言　 1  范围　 2  规范性引用文件　 3  术语和定义　 4  产品分类　 5  要求　 6  试验方法　 7  检验规则　 8  标志、包装、运输、贮存　

Extreme pressure lubricants for metalworking

T/QGCML 296-2022 矿山救援液压类剪切工具使用技术指南

本文件规定了矿山救援液压类剪切工具使用技术指南的术语和定义、总则、工具前检、人员操作、安全操作注意事项、维护与保养。 本文件适用于矿山救援人员使用手动液压剪切类工具进行矿山、公路、铁路事故救援、建筑物坍塌及地震等灾害救援工作。

Technical guide for the use of hydraulic shearing tools for mine rescue

T/QGCML 295-2022 矿山救援液压类支撑工具使用技术指南

本文件规定了矿山救援液压类支撑工具使用技术指南的术语和定义、总则、工具前检、人员操作、维护与保养。 本文件适用于矿山救援人员使用手动液压支撑工具进行的矿山、公路、铁路事故救援、建筑物坍塌及地震等灾害救援中移动障碍物、创造救援通道及保持物体稳定等工作。

Technical Guidelines for the Use of Mine Rescue Hydraulic Support Tools

JB/T 14371-2022 小型7∶24圆锥工具柄及其拉钉

Small 7:24 conical tool handle and rivets

T/CSCS 24-2022 全套管钻机用刀座

本文件规定了全套管钻机用刀座的术语和定义、型式与基本尺寸、技术要求、试验方法、检验规则及标志、包装、运输和贮存。 本文件适用于全套管钻机用刀座（以下简称刀座）的设计、制造、验收与使用。

Tool Holders for Full Casing Drilling Rigs

KS B 3268-2021 硬质合金一次性刀片

Cemented carbide throw-away inserts

T/SHMHZQ 063-2021 板材开料锯通用规范

4 技术参数  5 要求 5.1 正常工作环境  5.2 一般要求  5.3 外观及结构  5.4 尺寸  5.5 控制软件  5.6 锯切精度  5.7 环境适应性  5.8 安全性能  5.9 电磁兼容性  5.10 显示屏  5.11 外壳防护等级  5.12 限用物质  6 试验方法  6.1 试验环境  6.2 外观及结构  6.3 尺寸  6.4 控制软件  6.5 锯切精度  6.6 环境适应性  6.7 安全性能  6.8 电磁兼容性  6.9 触摸显示屏  6.10 外壳防护等级  6.11 限用物质  7 检验规则  7.1 检验分类  7.2 出厂检验  7.3 型式检验  7.4 判定规则  8 标志、包装、运输、贮存

General specification for plate cutting saws

KS B 3248-2021 硬质刀具材料及适用性分类

Hard tool materials and classification of applicability

T/ZZB 2270-2021 热装夹头刀柄

本文件规定了热装夹头刀柄的分类及型号、基本要求、技术要求、检测方法、检测规则、标志与包装、质量承诺等。 本文件适用于夹持范围直径为 3 mm～32 mm 的热装夹头刀柄。

Toolholder with shrink chuck

GSO ISO/TS 13399-203:2021 切削刀具数据表示和交换 第203部分：3D 模型的创建和交换 用于钻孔的可更换刀片

ISO 13399-203:2015 specifies a concept for the design of cutting items, limited to any kind of replaceable inserts for drilling, using related properties and domains of values. ISO 13399-203:2015 specifies a common way of designing simplified models that contain the following: - definitions and identification of the design features of replaceable inserts for drilling, with a link to the properties used; - definitions and identification of the internal structure of the 3D model that represents the features and properties of replaceable inserts for drilling; The following are outside the scope of ISO 13399-203:2015: - applications where these standard data may be stored or referenced; - creation and exchange of simplified 3D models for cutting tools; - creation and exchange of simplified 3D models for tool items; - creation and exchange of simplified 3D models for other cutting items not described in this part of ISO 13399; - creation and exchange of simplified 3D models for adaptive items; - creation and exchange of simplified 3D models for assembly items and auxiliary items.

Cutting tool data representation and exchange — Part 203: Creation and exchange of 3D models — Replaceable inserts for drilling

GSO ISO 5611-6:2021 用于可转位刀片的 A 型刀夹 第6部分：L 型

ISO 5611-6:2015 applies for cartridges type A, with hole(s) for fastening screw(s), of style L, i.e. with cutting edge angle κr = 95° for side and end cutting. Cartridges are intended to be used with indexable inserts made of hard metal, ceramic or other cutting materials and are primarily mounted to be used for internal turning of operations.

Cartridges, type A, for indexable inserts — Part 6: Style L

GSO ISO/TS 13399-311:2021 切削刀具数据表示和交换 第311部分：3D 模型的创建和交换 整体铰刀

ISO/TS 13399-311:2016 specifies a concept for the design of tool items, for all kinds of solid reamers, together with the usage of the related properties and domains of values. ISO/TS 13399-311:2016 specifies a common way of design simplified models that contain the following: - definitions and identifications of the design features of solid reamers, with an association to the used properties; - definitions and identifications of the internal structure of the 3D model that represents the features and the properties of solid reamers. The following are outside the scope of this part of ISO/TS 13399: - applications where these standard data may be stored or referenced; - concept of 3D models for cutting tools; - concept of 3D models for cutting items; - concept of 3D models for other tool items not being described in the scope of this part of ISO/TS 13399; - concept of 3D models for adaptive items; - concept of 3D models for assembly items and auxiliary items.

Cutting tool data representation and exchange — Part 311: Creation and exchange of 3D models — Solid reamers

GSO ISO 5611-2:2021 用于可转位刀片的 A 型刀夹 第2部分：F 型

ISO 5611-2:2015 applies for cartridges type A, with hole(s) for fastening screw(s), of style F, i.e. with cutting edge angle κr = 90° for end cutting. Cartridges are intended to be used with indexable inserts made of hard metal, ceramic, or other cutting materials and are primarily mounted to be used for internal turning of operations.

Cartridges, type A, for indexable inserts — Part 2: Style F

GSO ISO/TS 13399-405:2021 切削刀具数据表示和交换 第405部分：3D 模型的创建和交换 夹头

ISO/TS 13399-405:2016 specifies a concept for the design of adaptive items, limited to any kind of collets, clamping sleeves and ferrules, together with the usage of the related properties and domains of values. ISO/TS 13399-405:2016 specifies a common way of design simplified models that contain the following: - definitions and identifications of the design features of collets, clamping sleeves, and ferrules, with an association to the used properties; - definitions and identifications of the internal structure of the 3D model that represents the features and the properties of collets, clamping sleeves, and ferrules. The following are outside the scope of this part of ISO/TS 13399: - applications where these standard data may be stored or referenced; - concept of 3D models for cutting tools; - concept of 3D models for cutting items; - concept of 3D models for tool items; - concept of 3D models for other adaptive items not being described in the scope of this part of ISO 13399; - concept of 3D models for assembly items and auxiliary items.

Cutting tool data representation and exchange — Part 405: Creation and exchange of 3D models — Collets

GSO ISO/TS 13399-401:2021 切削刀具数据表示和交换 第401部分：3D 模型的创建和交换 转换、扩展和减少自适应项

ISO/TS 13399-401:2016 specifies a concept for the design of adaptive items, limited to any kind of converters, extenders and reducers, together with the usage of the related properties and domains of values. ISO/TS 13399-401:2016 specifies a common way of designing simplified models that contain the following: - definitions and identifications of the design features of converting, extending and reducing adaptors, with an association to the used properties; - definitions and identifications of the internal structure of the 3D model that represents the features and the properties of converting, extending and reducing adaptors. The following are outside the scope of this part of ISO/TS 13399: - applications where these standard data may be stored or referenced; - concept of 3D models for cutting tools; - concept of 3D models for cutting items; - concept of 3D models for tool items; - concept of 3D models for other adaptive items not described in the scope of this part of ISO/TS 13399; - concept of 3D models for assembly items and auxiliary items.

Cutting tool data representation and exchange — Part 401: Creation and exchange of 3D models — Converting, extending and reducing adaptive items

GSO ISO 5611-1:2021 用于可转位刀片的 A 型刀夹 第1部分：一般检验、相关性和尺寸确定

ISO 5611-1:2015 is general and is completed by ISO 5611‑2 to ISO 5611‑12. ISO 5611 applied for cartridges, type A, for indexable inserts and gives their styles in relation to their dimensions in accordance with ISO 5611‑2 to ISO 5611‑12. These cartridges are primarily intended for indexable inserts made of hard metal, ceramic or other cutting materials to be used for turning operations. These kinds of cartridges are mainly clamped with one or two screws on the cartridges. Explanation of the designation code according to ISO 5608.

Cartridges, type A, for indexable inserts — Part 1: General survey, correlation and determination of dimensions

GSO ISO/TS 13399-71:2021 切削刀具数据表示和交换 第71部分：图形数据布局 标准化数据交换文档的创建：图形产品信息

ISO/TS 13399-71:2016 determines the elements to be used for the creation of 2D documentation. The individual parts of documentation are drawing content, geometrical data, drawing frame and drawing header data as shown in Figure 1. The standardization of drawing formats, e.g. drawing frame, structure of the bill of material, are out of the scope of ISO/TS 13399-71:2016. Furthermore, it is intended to standardize the data exchange of the product documentation. It specifies a common way for the basic principles for the creation of product documentation that contain the following: - definitions and identifications of the elements of a product documentation; - definitions and identifications of the internal structure of the product documentation; - definitions and identifications of those elements and features that are necessary to show the protection notices and the copyrights of the originator of the document. The following are outside the scope of ISO/TS 13399-71:2016: - layer settings as defined in ISO/TS 13399‑70; - structure of the data exchange file using extensible mark-up language (XML); - applications where these standard data may be stored or referenced; - concept of the classification of cutting tool data and their properties; - concept of the design of 2D drawings for cutting tools; - concept of the design of 3D models for cutting tools; - application data for the use of those cutting tools; - information about the reconditioning of cutting tools; - information about additional application and usage data (e.g. coolant supply).

Cutting tool data representation and exchange — Part 71: Graphical data layout — Creation of documents for standardized data exchange: Graphical product information