25.160.01 标准查询与下载

ISO 22688:2020 钎焊.金属材料钎焊的质量要求

This document defines two levels of quality requirements and selection criteria for brazing of metallic materials. It applies to manufacturing, both in workshops and at installation sites. NOTE 1 This document is applicable to brazing industry quality management systems, similar in scope and purpose to the ISO 3834 series. This document provides complete sets of quality requirements for process control related to all listed brazing processes (for each process separately or in combination as specified) and lists the documents with which it is necessary to conform to these requirements. The requirements in this standard may be adopted for other brazing processes, with or without adjustments, under the responsibility of the manufacturer. NOTE 2 These requirements can be used on their own by a manufacturer or in conjunction with a quality management system (e.g. ISO 9001).

Brazing — Quality requirements for brazing of metallic materials

BS ISO 17927-2:2020 航空航天应用的焊接 金属部件的熔焊 验收标准

What is ISO 17927-2 about?   ISO 17927-2 is the second part of a multi-series standard that covers welding for aerospace applications.   ISO 17927-2 specifies symbols, abbreviated terms, conformance, acceptance criteria for fusion weldments on metallic components. It is to be applied to the processes, provided that, it is referenced or approved by the responsible engineering/design authority.   ISO 17927 ‑ 2 covers the following fusion welding processes:    Oxyfuel welding   Gas-shielded arc welding with non-consumable tungsten electrode, Gas tungsten arc welding  

Welding for aerospace applications. Fusion welding of metallic components - Acceptance criteria

BS ISO 17927-1:2020 航空航天应用的焊接 金属部件熔焊 工艺规范

What is ISO 17927 ‑ 1 about?   ISO 17927-1 is the first part of a multi-series international standard that covers welding for aerospace applications.   ISO 17927-1 specifies the requirements for fusion welding of aerospace hardware. It is to be used in conjunction with the design/engineering authority’s design documents or their accepted data for fusion welding of metallic components.   ISO 17927 ‑ 1 covers the following fusion welding processes:    Oxyfuel welding   Gas-shielded arc welding with non-consumable tungsten electrode, Gas tungsten arc welding

Welding for aerospace applications. Fusion welding of metallic components - Process specification

ISO 17927-1:2020 航空航天用焊接.金属部件的熔焊.第1部分:工艺规范

This document specifies the requirements for fusion welding of aerospace hardware. It is to be used in conjunction with the design/engineering authority’s design documents or their accepted data. This document covers the processes given in Table 1 and material groups given in Table 2. Table 1 — Fusion welding processes covered by this document Process Process number (ISO 4063) Oxyfuel welding 31 Gas-shielded arc welding with non-consumable tungsten electrode, Gas tungsten arc welding 14 Plasma arc welding 15 Electron beam welding 51 Laser welding, Laser beam welding 52 Table 2 — Material groups covered by this document (see ISO 24394:2018, 4.5) Material group Description A Unalloyed steel, low-alloyed steels, high-alloyed ferritic steels B Austenitic, martensitic and precipitation hardening steels C Titanium and titanium alloys, niobium, zirconium and other reactive metals D Aluminium and magnesium alloys E Materials that do not conform to other material groups (e.g. molybdenum, tungsten, copper alloys) F Nickel alloys, cobalt alloys.

Welding for aerospace applications — Fusion welding of metallic components — Part 1: Process specification

ISO 17927-2:2020 航空航天用焊接.金属部件的熔焊.第2部分:验收标准

This document specifies acceptance criteria for fusion weldments on metallic components. It is to be applied provided it is referenced or approved by the responsible engineering/design authority. This document covers the following processes given in Table 1 and the material groups given in Table 2. Table 1 — Fusion welding processes covered by this document Process Process number (ISO 4063:2009) Oxyfuel welding 31 Gas shielded arc welding with non-consumable tungsten electrode, gas tungsten arc welding 14 Plasma arc welding 15 Electron beam welding 51 Laser welding, laser beam welding 52 Table 2 — Material groups covered by this document Material group Description A Unalloyed steel, low alloyed steels, high alloyed ferritic steels B Austenitic, martensitic and precipitation hardening steels C Titanium and titanium alloys, niobium, zirconium and other reactive metals D Aluminium and magnesium alloys E Materials that do not conform to other material groups (e.g. molybdenum, tungsten, cop- per alloys) F Nickel alloys, cobalt alloys. NOTE   Material groups according to ISO 24394.

Welding for aerospace applications — Fusion welding of metallic components — Part 2: Acceptance criteria

KS B ISO 15618-2:2019 焊工焊接水下的鉴定试验 第1部分:潜水员 - 焊工和运营商 - 焊工在陆地高压焊接（ISO 15618-2:2001）

Qualification testing of welders for underwater welding — Part 2: Diver-welders and welding operators for hyperbaric dry welding

KS B ISO 15618-2-2019 焊工焊接水下的鉴定试验 第1部分:潜水员 - 焊工和运营商 - 焊工在陆地高压焊接（ISO 15618-2:2001）

Qualification testing of welders for underwater welding — Part 2: Diver-welders and welding operators for hyperbaric dry welding

KS B 3020-2019 火炬灯

Torch lamps

ISO/TR 24471:2019 钎焊.材料分组系统.美国材料

Brazing — Grouping systems for materials — American materials

DB23/T 2471-2019 焊接车间烟尘评价规范

Specification for smoke and dust evaluation in welding workshop

T/CSTM 00126-2019 内覆或衬里耐蚀合金复合管道环焊缝焊接工艺评定

本标准规定了内覆或衬里耐蚀合金复合管道环焊缝焊接工艺评定规则、试验及评定方法和合格指标。 本标准适用于油气田地面建设工程中内覆或衬里耐蚀合金复合管道环焊缝焊接工艺评定。

Welding procedure qualification of girth welds of corrosion resistant alloy clad or lined steel pipeline

BS EN ISO 14731:2019 焊接协调 任务和职责

1   Scope This document identifies the essential welding quality related tasks and responsibilities included in welding coordination . The principle of an assessment according to this document is that welding coordination personnel need to be competent in the welding-related tasks allocated to them. It is presumed that welding coordination personnel have the necessary education, qualifications and experience and are appointed by the manufacturer . Regulatory documents, application standards and contracts can give specific requirements for welding coordination personnel. Otherwise, it is the responsibility of the manufacturer to determine the requirements to be in compliance with this document.

Welding coordination. Tasks and responsibilities

T/CECWA 0000-2019 工程焊接施工及验收通用标准

1、总则 2、术语 3、基本规定 4、人员 5、设施和设备 6、材料 7、焊接工艺 8、焊接检验 9、验收 10、职业健康、安全、环境

General standard for construction and acceptance of welding engineering

EN ISO 14731:2019 焊接协调.任务和责任

This document identifies the essential welding quality related tasks and responsibilities included in welding coordination. The principle of an assessment according to this document is that welding coordination personnel need to be competent in the welding-related tasks allocated to them. It is presumed that welding coordination personnel have the necessary education, qualifications and experience and are appointed by the manufacturer. Regulatory documents, application standards and contracts can give specific requirements for welding coordination personnel. Otherwise, it is the responsibility of the manufacturer to determine the requirements to be in compliance with this document.

Welding coordination - Tasks and responsibilities (ISO 14731:2019)

T/CAMMT 15-2019 药芯银钎料

药芯银钎料分类和型号、技术要求、试验方法、检验方法、包装和标记

Flux-Cored Silver Brazing Filler Metal

T/CAMMT 14-2019 药芯铝钎料

药芯铝钎料型号和分类、钎料/钎剂成分及配比、形态、填充系数、几何尺寸、含水量、严实度、检验试验、包装储运和保质期

Flux-Cored Aluminum Brazing Filler Metal

ISO 14731:2019 焊接协调 - 任务与责任

This document identifies the essential welding quality related tasks and responsibilities included in welding coordination. The principle of an assessment according to this document is that welding coordination personnel need to be competent in the welding-related tasks allocated to them. It is presumed that welding coordination personnel have the necessary education, qualifications and experience and are appointed by the manufacturer. Regulatory documents, application standards and contracts can give specific requirements for welding coordination personnel. Otherwise, it is the responsibility of the manufacturer to determine the requirements to be in compliance with this document.

Welding coordination — Tasks and responsibilities

JIS Z 3841:2018 半自动焊接技术标准鉴定试验及验收要求

Standard qualification test and acceptance requirements for semi-automatic welding technique

JIS Z 3801:2018 手工焊接技术标准鉴定试验及验收要求

Standard qualification test and acceptance requirements for manual welding technique

JIS Z 3821:2018 不锈钢焊接技术评定试验及验收要求

Standard qualification test and acceptance requirements for welding technique of stainless steel