25.160.10 焊接工艺 标准查询与下载
共找到 2323 条与 焊接工艺 相关的标准，共 155 页
本文件规定了支线集装箱船用铸钢件（15mm ~120mm）焊接、焊后返修的一般要求、工艺准备、焊接施工工艺、焊后检验与修复和安全事项等。 本文件适用于支线集装箱船用铸钢件（15mm ~120mm）的焊接、焊缝缺陷返修。
Procedure specification for welding of casting for feeder container ship
- ICS
- 25.160.10
- CCS
- C373
- 发布
- 2023-12-26
- 实施
- 2024-02-01
Standard Guide for Directed Energy Deposition of Metals
- ICS
- 25.160.10
- CCS
- 发布
- 2023-12-15
- 实施
本文件规定了智能激光锡焊工艺的一般要求和工艺过程。
Proess Procedure for intelligent laser soldering
- ICS
- 25.160.10
- CCS
- C342
- 发布
- 2023-11-30
- 实施
- 2023-12-01
Specification and qualification of welding procedures for metallic materials. Welding procedure test - Upset (resistance butt) and flash welding
- ICS
- 25.160.10
- CCS
- 发布
- 2023-11-30
- 实施
- 2023-11-30
本文件规定了双丝气电立焊（以下简称焊接）术语和定义、仪器和设备、作业环境、人员、焊接材料、装配要求、焊接前准备、焊接工艺、焊后检验及修补。 本文件适用于厚度为40mm~85mm 的EH40级别及以下高热输入焊接用钢（供货状态包含热轧（AR）或控制轧制（CR）或热机械控制轧制（TMCP）或TMCP+T状态交货），板幅位置倾斜度为80°~100°的立向上对接焊缝焊接，焊接热输入量不大于750kj/cm。
Process specification for tandem vertical-up electro gas welding
- ICS
- 25.160.10
- CCS
- C313
- 发布
- 2023-11-30
- 实施
- 2024-02-29
Resistance welding — Spot welding of aluminium and aluminium alloys — Weldability, welding and testing
- ICS
- 25.160.10
- CCS
- 发布
- 2023-11-20
- 实施
Specification and qualification of welding procedures for metallic materials — Welding procedure test — Part 1: Arc and gas welding of steels and arc welding of nickel and nickel alloys
- ICS
- 25.160.10
- CCS
- 发布
- 2023-11-10
- 实施
Specification and qualification of welding procedures for metallic materials — Welding procedure test — Part 12: Spot, seam and projection welding
- ICS
- 25.160.10
- CCS
- 发布
- 2023-11-10
- 实施
Specification and qualification of welding procedures for metallic materials — Welding procedure specification — Part 2: Gas welding
- ICS
- 25.160.10
- CCS
- 发布
- 2023-11-10
- 实施
Specification and qualification of welding procedures for metallic materials — Welding procedure specification — Part 1: Arc welding
- ICS
- 25.160.10
- CCS
- 发布
- 2023-11-10
- 实施
Specification and qualification of welding procedures for metallic materials — Qualification by adoption of a standard welding procedure specification
- ICS
- 25.160.10
- CCS
- 发布
- 2023-11-10
- 实施
Specification and qualification of welding procedures for metallic materials — Welding procedure test — Part 13: Upset (resistance butt) and flash welding
- ICS
- 25.160.10
- CCS
- 发布
- 2023-11-10
- 实施
本文件规定了激光超细锡丝焊工艺指南的术语和定义、一般要求、工艺方法、质量检验要求、安全。 本文件适用于激光超细锡丝焊工艺。
Laser ultra-fine tin wire welding process guide
- ICS
- 25.160.10
- CCS
- C383
- 发布
- 2023-10-26
- 实施
- 2023-11-10
本文件规定了激光锡球焊工艺规范的术语和定义、工艺流程、质量控制、焊接操作人员、焊接工艺评定。 本文件适用于激光锡球焊工艺规范。
Laser soldering process specifications
- ICS
- 25.160.10
- CCS
- C383
- 发布
- 2023-10-26
- 实施
- 2023-11-10
本文件规定了激光锡焊质量要求的术语和定义、材料要求、焊接质量要求、焊接质量检查。 本文件适用于激光锡焊质量的检验。
Laser soldering quality requirements
- ICS
- 25.160.10
- CCS
- C383
- 发布
- 2023-10-26
- 实施
- 2023-11-10
本文件规定了激光钎焊工艺规范的术语和定义、技术要求、钎焊过程、试验方法、检验规则。 本文件适用于激光钎焊的工艺技术。
Laser brazing process specifications
- ICS
- 25.160.10
- CCS
- C383
- 发布
- 2023-10-26
- 实施
- 2023-11-11
本文件规定了火力发电厂异种钢焊接的总体要求、焊接接头设计与焊前准备、焊接材料选用、焊接工艺、焊接热处理、质量检验和接头返修等技术要求。 本文件适用于采用焊条电弧焊、钨极氩弧焊、熔化极气体保护焊、药芯焊丝电弧焊及埋弧焊等焊接方法，焊接承压部件和在承压部件上焊接非承压部件的异种钢焊接工作。非承压部件的异种钢焊接可参照执行。
Technical regulations for welding of dissimilar steels in thermal power plants
- ICS
- 25.160.10
- CCS
- J33
- 发布
- 2023-10-11
- 实施
- 2024-04-11
Specification and qualification of welding procedures for metallic materials — Qualification based on tested welding consumables
- ICS
- 25.160.10
- CCS
- 发布
- 2023-10-04
- 实施
Specification and qualification of welding procedures for metallic materials — Welding procedure test — Part 10: Hyperbaric dry welding
- ICS
- 25.160.10
- CCS
- 发布
- 2023-10-04
- 实施
Specification and qualification of welding procedures for metallic materials — Welding procedure test — Part 8: Welding of tubes to tube-plate joints
- ICS
- 25.160.10
- CCS
- 发布
- 2023-10-04
- 实施
