25.220.01 标准查询与下载

T/CSEA 14-2021 无氰碱性镀镉工艺通用规范

本标准规定了无氰碱性镀镉镀液和镀层的术语和定义、工艺、质量要求及检验方法。 本标准适用于机械、船舶、航空、航天、电子、电气等金属与非金属基体上的无氰碱性镀镉。

General specification for cyanide-free alkaline cadmium plating process

T/CSEA 15-2021 真空磁控溅射镀银工艺及质量检验

本标准规定了真空磁控溅射镀银有关的术语和定义、工艺方法、材料与设备要求、质量检验以及包装储存等。 本标准适用于航空航天、船舶、电子等领域的金属以及非金属零件的真空磁控溅射镀银工艺、质量控制与验收。

Vacuum Magnetron Sputtering Silver Plating Technology and Quality Inspection

ASTM D8380-21 憎水和泛憎水涂层的干耐磨性的标准试验方法

1.1?This test method describes a procedure for evaluating dry abrasion resistance of a thin hydrophobic or omniphobic coating, or both. The coating is typically less than 100 nm thick and is applied to a planar, glass substrate by application methods including, but not limited t

Standard Test Method for Dry Abrasion Resistance of Hydrophobic and Omniphobic Coatings

YS/T 714-2020 铝合金建筑型材有机聚合物喷涂工艺技术规范

Technical Specification for Organic Polymer Spraying Process of Aluminum Alloy Building Profiles

T/CACE 020-2020 进口用于再制造的旧油管技术要求 陶瓷内衬管

1  范围 2  规范性引用文件 3  术语和定义 4  型号表示方法 5  技术要求 6  检验 7  试验方法、检验规则及判定方法 8  标志、包装与运输

Technical requirements for imported used tubing for remanufacturing: ceramic lined tubing

ASTM D5618-20 剪切时藤壶粘附强度测量的标准试验方法

1.1 This test method covers the measurement of barnacle adhesion in shear to surfaces exposed in the marine environment. It is used to establish the ability of a surface to reduce biofouling adhesion. Surfaces with known barnacle adhesion strengths are included to serve as controls. 1.2 The values stated in SI units are to be regarded as the standard. The values given in parentheses are for information only. 1.3 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use. 1.4 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

Standard Test Method for Measurement of Barnacle Adhesion Strength in Shear

ASTM D6990-20 评估海洋涂层系统的生物防污性和物理性能的标准实施规程

1.1 This practice establishes a practice for evaluating degree of biofouling settlement on and physical performance of marine coating systems when panels coated with such coating systems are subjected to immersion conditions in a marine environment. Guidance for preparation or exposure and handling of test specimens can be found in related ASTM standards as noted below (see Section 2). 1.2 This practice and related exposure methodologies are designed as tools for the relative assessment of coating performance, and in no way are to be used as an absolute indicator of long-term performance under all conditions and in all environments. There can be high variability among and within exposure sites with respect to water quality and population or species of fouling organisms, and coating performance may vary with these and other properties. 1.3 The values stated in SI units are to be regarded as the standard. The values given in parentheses are for information only. 1.4 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use. A specific hazard statement is given in Section 6. 1.5 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

Standard Practice for Evaluating Biofouling Resistance and Physical Performance of Marine Coating Systems

ASTM D8331/D8331M-20 用加固光学干涉法用非破坏性方法测量薄膜涂层厚度的标准试验方法

1.1 This test method encompasses measuring the film thickness of a coil coated organic coating layer. Operators can use this method in process during the coating application or in a laboratory setting. 1.2 This test method does not specify the expected film thickness/test results for a coating, nor the specific “recipe” file needed to measure a coating. 1.3 The values stated in either SI units or inch-pound units are to be regarded separately as standard. The values stated in each system are not necessarily exact equivalents; therefore, to ensure conformance with the standard, each system shall be used independently of the other, and values from the two systems shall not be combined. 1.4 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use. 1.5 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

Standard Test Method for Measurement of Film Thickness of Thin-Film Coatings by Non-Destructive Means Using Ruggedized Optical Interference

T/CSEE 0150-2020 变电站金属材料大气环境防腐蚀技术规范

本标准规定了大气腐蚀环境中变电站的防腐蚀设计原则、金属材料选择、防护涂镀层设计和质量检验的技术要求。 本标准适用于大气腐蚀环境下变电站金属材料的防腐蚀选材、防护涂镀层设计及质量检验。

Technical specification for anti-corrosion of substation metal materials in atmospheric environment

DB13/T 5137-2019 薄膜前处理材料技术条件

Thin film pretreatment material technical conditions

T/CMES 30004-2019 涂装系统供货 通用规范

本标准规定了涂装系统供货的分类和项目设计/方案策划、组织、人员、设备设施、物料、工艺、涂层质量、安全及环境、结算等要求。

General specification for supply of coating system

ASTM B825-19 金属试样表面薄膜库仑还原的标准试验方法

1.1 This test method covers procedures and equipment for determining the relative buildup of corrosion and tarnish films (including oxides) on metal surfaces by the constant-current coulometric technique, also known as the cathodic reduction method. 1.2 This test method is designed primarily to determine the relative quantities of tarnish films on control coupons that result from gaseous environmental tests, particularly when the latter are used for testing components or systems containing electrical contacts used in customer product environments. 1.3 This test method may also be used to evaluate test samples that have been exposed to indoor industrial locations or other specific application environments. (See 4.6 for limitations.) 1.4 This test method has been demonstrated to be applicable particularly to copper and silver test samples (see (1)).2 Other metals require further study to prove their applicability within the scope of this test method. 1.5 The values stated in SI units are the preferred units. The values provided in parentheses are for information only. 1.6 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to become familiar with all hazards including those identified in the appropriate Material Safety Data Sheet (MSDS) for this product/material as provided by the manufacturer, to establish appropriate safety, health, and environmental practices, and determine the applicability of regulatory limitations prior to use. 1.7 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

Standard Test Method for Coulometric Reduction of Surface Films on Metallic Test Samples

KS B 4903-2019 钢铁淬火、回火工艺

Process of quenching and tempering of iron and steel

T/CIAA 003-2019 表面抗菌铝及铝合金

本标准规定了表面抗菌铝及铝合金的术语和定义、技术要求、检测方法、检验规则和标识、包装、运输、贮存。

Surface antimicrobial aluminium and antimicrobial aluminium alloys

DB50/T 930-2019 二维码激光蚀刻本体标识技术应用导则

本标准适用于聚碳酸酯、聚乙烯、铝合金、碳素钢、不锈钢、铸铁、纸、PCB的二维码激光本体标识的操作和应用。

Two-dimensional code laser etching ontology marking technology application guidelines

T/FSI 019-2019 玻璃防雾用水性硅油分散液

本标准规定了玻璃防雾用水性硅油分散液的技术要求、试验方法、检验规则、标志、包装、运输和贮存。 本标准适用于以硅油为基础材料，与其它助剂复配制成的透明或微浊的水性分散液，主要用于玻璃防雾。

Glass anti-fog water-based silicone oil dispersion

T/GDEIA 5-2019 反渗透膜功能涂布机

涂布机主要由放卷装置、储料装置、涂布装置、烘干冷却装置、收卷装置、控制系统等组成。反渗透膜涂布机用一步法或两步法实现将涂层材料均匀覆涂在基材表面上，达到规定的反渗透膜工艺要求的机械。 基材宽度　mm　≤1650 涂布宽度　mm　≤1600 辊面宽度　mm　≤1750 机械速度　m/min　≥15 烘箱温度精度　℃　≤±1 最大张力　N/m　200 张力精度　%　≤±2 收卷端面精度　mm　≤±2 具体涂布方式、涂布头数的选择取决于涂布液的配方参数、温度、及其涂层结构要求。

Reverse osmosis coating machine

T/ZZB 0862-2018 双线并联模块化涂装生产线

本标准规定了双线并联模块化涂装生产线的基本要求、技术要求、试验方法、检验规则、标志、包装、运输、贮存、质量与服务承诺。 本标准适用于前处理为喷淋式的双线并联式喷漆涂装生产线。

Double line parallel modular painting production line

ASTM D6037-18 高光泽涂料的耐磨耐磨性的标准测试方法

Standard Test Methods for Dry Abrasion Mar Resistance of High Gloss Coatings

ASTM D5767-18 用于显示涂层表面特征（DOI）光泽度的仪器测量的标准测试方法

1.1 These test methods describe the measurement of the distinctness-of-image (DOI) gloss of coating surfaces using electro-optical measuring techniques. 1.2 The coatings assessed shall be applied to planar rigid surfaces. 1.3 Test Method—The light through a small slit is projected on the specimen surface and its reflected image intensity is measured through a sliding combed shutter to provide a value of image clarity. 1.4 The values stated in SI units are to be regarded as standard. No other units of measurement are included in this standard. 1.5 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use. 1.6 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

Standard Test Method for Instrumental Measurement of Distinctness-of-Image (DOI) Gloss of Coated Surfaces