25.220.60 标准查询与下载

NF T37-001-18:2002 镀层盘材金属.试验方法.第18部分:耐染色性的测定

Coil coated metals - Test methods - Part 18 : resistance to staining.

BS 4164:2002 钢铁防护用煤柏油基热覆材料(包括相应的底漆)规范

This British Standard specifies requirements for hot-applied coal-tar-based materials, reinforced with inert non-fibrous fillers, which are used to protect iron and steel against corrosion. Requirements for a primer are included because the performance of hot-applied coating materials depends on its use. Different grades of material are used for different substrates, conditions of application and service. This standard indicates factors that need to be taken into account in selecting the grade for a particular use.

Specification for coal-tar-based hot-applied coating materials for protecting iron and steel, including a suitable primer

DIN EN 13523-6:2002 卷材涂层金属.试验方法.第6部分:压痕后的粘合力 (深拉试验); 德文版本 EN 13523-6:2002

This Part of EN 13523 describes the procedure for determining the adhesion of an organic coating to a metallic substrate after indentation after slow deformation. The resistance to cracking may also be evaluated.

Coil coated metals - Test methods - Part 6: Adhesion after indentation (cupping test); German version EN 13523-6:2002

DIN EN 13523-18:2002 卷材涂层金属.试验方法.第18部分:耐染污性; 德文版本 EN 13523-18:2002

This Part of EN 13523 specifies test procedures for assessing the effect of chemicals on the characteristics of an organic coating on a metallic substrate. It covers testing by using defined substances and to assess the change in characteristics such as discoloration, change in gloss, blistering, softening, swelling and loss of adhesion. Assessment of other phenomena may be agreed between the interested parties.

Coil coated metals - Test methods - Part 18: Resistance to staining; German version EN 13523-18:2002

DIN EN 13523-23:2002 卷材涂层金属.试验方法.第23部分:在含有二氧化硫湿气环境中的颜色的稳定性; 德文版本 EN 13523-23:2002

This Part of EN 13523 describes the procedure for determining the colour stability of an organic coating on a metallic substrate when exposed to humid atmospheres containing sulfur dioxide. This method has been designed to provide an accelerated test for evaluating the colour fastness of coil coated products in atmospheres containing sulfur dioxide (typical of industrial atmospheres).

Coil coated metals - Test methods - Part 23: Colour stability in humid atmospheres containing sulfur dioxide; German version EN 13523-23:2002

DIN EN 13523-15:2002 卷材涂层金属.试验方法.第15部分:位变异构; 德文版本 EN 13523-15:2002

This Part of EN 13523 describes the procedure for determining the metamerism of a colour match of an organic coating on a metallic substrate. When two colour specimens have identical spectral reflection curves," they will match under any illuminant irrespective of its spectral characteristics. This is termed a ""spectral match"".#",,#

Coil coated metals - Test methods - Part 15: Metamerism; German version EN 13523-15:2002

BS EN 13523-23:2002 卷材覆层金属.试验方法.在含二氧化硫的潮湿气氛中着色稳定性

This Part of EN 13523 defines terms of the procedure for determining the colour stability of an organic coating on a metallic substrate when exposed to humid atmospheres containing sulfur dioxide. This method has been designed to provide an accelerated test for evaluating the colour fastness of coil coated products in atmospheres containing sulfur dioxide (typical of industrial atmospheres).

Coil coated metals - Test methods - Colour stability in humid atmospheres containing sulfur dioxide

BS EN 13523-6:2002 卷材覆层金属.试验方法.刻压纹之后的粘结(杯形挤压试验)

This Part of EN 13523 defines terms of the procedure for determining the adhesion of an organic coating to a metallic substrate after indentation after slow deformation. The resistance to cracking can also be evaluated.

Coil coated metals - Test methods - Adhesion after indentation (cupping test)

BS EN 13523-15:2002 卷材覆层金属.试验方法.位变异构现象

This Part of EN 13523 defines terms of the procedure for determining the metamerism of a colour match of an organic coating on a metallic substrate. When two colour specimens have identical spectral reflection curves, they are matching under any illuminant irrespective of its spectral characteristics. This is termed a "spectral match". It is also possible for two colour specimens having different spectral reflection curves to match visually under a given light source but not to match under another light source with different spectral characteristics; such matches are termed "metameric". One quantitative description of metamerism is the so-called "metamerism index". The information of the metamerism index is of limited value where △E (instrumental colour difference for a given illuminant, see EN 13523-3:2001) is > 0,5. The metamerism index is not suited for determining the absolute colour difference or colour constancy of a given specimen at change of illuminant. The colour difference under the reference illuminant is to be measured in colour coordinates L, a and b (see EN 13523-3:2001). Excluded from this method are organic coatings producing fluorescence and/or which are multicoloured, pearlescent or metallic.

Coil coated metals - Test methods - Metamerism

BS EN 13523-18:2002 卷材覆层金属.试验方法.耐染色性能

This Part of EN 13523 specifies test procedures for assessing the effect of chemicals on the characteristics of an organic coating on a metallic substrate. It covers testing by using defined substances and to assess the change in characteristics such as discoloration, change in gloss, blistering, softening, swelling and loss of adhesion. Assessment of other phenomena may be agreed between the interested parties.

Coil coated metals - Test methods - Resistance to staining

BS EN 13523-8:2002 卷材覆层金属.试验方法.耐盐雾试验

This Part of EN 13523 defines terms of the procedure for determining the resistance to salt spray (fog) of an organic coating on a metallic substrate. For steel neutral salt spray (fog) is usually used, and for aluminium acetic acid salt spray (fog).

Coil coated metals - Test methods - Resistance to salt spray (fog)

EN 13523-23:2002 金属镀层线圈的试验方法.第23部分:含二氧化硫的潮湿空气中的色稳定性

This part of EN 13523 defines terms of the procedure for determiningThe colour stability of an organic coating on ametallic substrate when exposed to humid atmospheres containing sulfur dioxide.This method has been designed to provide an accelerated test for evaluatingThe colour fastness of coil coatedproducts in atmospheres containing sulfur dioxide (typical of industrial atmospheres).

Coil Coated Metals - Test Methods - Part 23: Colour Stability in Humid Atmospheres Containing sulfur Dioxide (F)

EN 13523-18:2002 卷材涂层金属的试验方法.第18部分:耐染污性

This part of EN 13523 specifies test procedures for assessingThe effect of chemicals onThe characteristics of an organic coating on a metallic substrate. It covers testing by using defined substances and to assessThe change in characteristics such as discoloration, change in gloss,blistering, softening, swelling and loss of adhesion. Assessment of other phenomena may be agreed betweenThe interested parties.

Coil coated metals - Test methods - Part 18: Resistance to staining

HG/T 2471-2001 电解槽金属阳极涂层

本标准规定了电解槽金属阳极涂层的要求、试验方法、检验规则及金属阳极的包装、标志、贮运等。 本标准适用于电解槽中以钌为主体，以钛为基体，以氯化钠水溶液为电解液的氯碱工业隔膜法电解槽、次氯酸钠工业无隔膜电解槽和氯酸盐工业无隔膜电解槽的金属阳极涂层。

Coating of dimensionally stable anode for electrolyzer

HG/T 2951-2001 隔膜法金属阳极电解槽

本标准规定了隔膜法金属阳极电解槽的产品分类、要求、试验方法、检验规则及标志、包装、贮运和出厂技术文件。 本标准适用于氯碱工业用电解槽。

Metal anode cells used diaphragm method

ASTM D4060-95 用泰伯研磨机测定有机涂层耐磨性的标准试验方法

1.1 This test method covers the determination of the resistance of organic coatings to abrasion produced by the Taber Abraser on coatings applied to a plane, rigid surface, such as a metal panel.1.2 Because of the poor reproducibility of this test method, it should be restricted to testing in only one laboratory when numerical abrasion resistance values are to be used. Interlaboratory agreement is improved significantly when rankings of coatings are used in place of numerical values.1.3 The values stated in inch-pound units are to be regarded as the standard. The values given in parentheses are for information only.1.4 This standard is similar in content (but not technically equivalent) to ISO 7784-2.1.5 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.

Standard Test Method for Abrasion Resistance of Organic Coatings by the Taber Abraser

DIN EN 13523-9:2001 涂覆金属卷材.试验方法.第9部分:耐水浸性

The document describes the procedures for determining the resistance to water immersion of an organic coating on a metallic substrate. The test is applicable to all kinds of organic coatings, including metallics and embossed, textured, pearlescent and printed coatings. The result of the test give an indication of the resistance of the coil coated metal to water. The method is not intended to reprocuce any particular conditions of condensation. The method is not intended to reproduce any particular condition of condensation.#,,#

Coil coated metals - Test methods - Part 9: Resistance to water immersion; German version EN 13523-9:2001

DIN EN 13523-3:2001 涂覆金属卷材.试验方法.第3部分:色差.仪器比较

The document describes the procedures for determining the instrumental colour difference (CIELAB) of an organic coating on a metallic substrate.

Coil coated metals - Test methods - Part 3: Colour difference; Instrumental comparison; German version EN 13523-3:2001

DIN EN 13523-14:2001 涂覆金属卷材.试验方法.第14部分:粉化(Helmen法)

The document describes the procedures for determining objectively the chalking resulting from natural or artificial weathering of an organic coating on a metallic substrate. The advantage of this procedure for measuring chalking of an organic coating is that the result can be read off immediately on an instrument. Subjective judgement by visual comparison of test specimens with reference specimens is not necessary. Experience to date with this test method has been based mainly on artificially weathered specimens. Reproductible results can only be obtained by careful execution of the test.

Coil coated metals - Test methods - Part 14: Chalking (Helmen method); German version EN 13523-14:2001

DIN EN 13523-0:2001 涂覆金属卷材.试验方法.第0部分:总则和试验方法列表

Coil coated metals - Test methods - Part 0: General introduction and list of test methods; German version EN 13523-0:2001