29.100.10 磁性元件 标准查询与下载
共找到 875 条与 磁性元件 相关的标准，共 59 页
IEC 63093-10:2022 specifies the dimensions that are of importance for mechanical interchangeability for a preferred range of PM-cores made of magnetic oxides, the main dimensions for coil formers to be used with these cores and the locations of their pins on a modular printed wiring grid in relation to the base outlines of cores. It also specifies the effective parameter values to be used in calculations and gives guidelines on allowable limits of surface irregularities applicable to the PM-cores.
Ferrite cores - Guidelines on dimensions and the limits of surface irregularities - Part 10: PM-cores and associated parts
- ICS
- 29.100.10
- CCS
- 发布
- 2022-05-27
- 实施
- 2022-08-26 (7)
Ferrite cores - Guidelines on dimensions and the limits of surface irregularities - Part 10: PM-cores and associated parts
- ICS
- 29.100.10
- CCS
- 发布
- 2022-04-21
- 实施
BS EN 62024-2. High frequency inductive components. Electrical characteristics and measuring methods - Part 2. Rated current of inductors for DC-to-DC converters
- ICS
- 29.100.10
- CCS
- 发布
- 2022-03-04
- 实施
- 2022-03-04
IEC 63182-3:2021 specifies the dimensions that are of importance for mechanical interchangeability for a preferred range of E-cores made of metallic magnetic powder, the essential dimensions of coil formers to be used with them as well as the effective parameter values to be used in calculations involving them, and gives guidelines on allowable limits of surface irregularities applicable to E-cores. This document is a specification useful in the negotiations between magnetic powder core suppliers and users about surface irregularities.
Magnetic powder cores - Guidelines on dimensions and the limits of surface irregularities - Part 3: E-cores
- ICS
- 29.100.10
- CCS
- 发布
- 2022-02-11
- 实施
- 2022-04-20 (7)
IEC 63182-5:2021 specifies the preferred range of the dimensions that are of importance for mechanical interchangeability and gives the guidelines on allowable limits of surface irregularities for cylinder-cores made of metallic magnetic powder. This document is a specification useful in the negotiations between magnetic powder core suppliers and users about surface irregularities.
Magnetic powder cores - Guidelines on dimensions and the limits of surface irregularities - Part 5: Cylinder-cores
- ICS
- 29.100.10
- CCS
- 发布
- 2022-01-21
- 实施
- 2022-04-03 (7)
Magnetic powder cores - Guidelines on dimensions and the limits of surface irregularities - Part 3: E-cores
- ICS
- 29.100.10
- CCS
- 发布
- 2021-12-16
- 实施
Magnetic powder cores - Guidelines on dimensions and the limits of surface irregularities - Part 5: Cylinder-cores
- ICS
- 29.100.10
- CCS
- 发布
- 2021-11-29
- 实施
Magnetic powder cores - Guidelines on dimensions and the limits of surface irregularities - Part 4: Block-cores
- ICS
- 29.100.10
- CCS
- 发布
- 2021-11-29
- 实施
This part of IEC 62025 specifies a test method for the non-electrical characteristics of the Surface Mounted Device (SMD) inductors to be used for electronic and telecommunication equipment. The object of this part of IEC 62025 is to define methods for measuring mechanical perfor
High frequency inductive components - Non-electrical characteristics and measuring methods - Part 2: Test methods for non-electrical characteristics (IEC 62025-2:2019); German version EN IEC 62025-2:2019
- ICS
- 29.100.10
- CCS
- L17
- 发布
- 2021-11-01
- 实施
- 2021-11-01
High frequency inductive components - Electrical characteristics and measuring methods - Part 2: Rated current of inductors for DC-to-DC converters (( IEC 62024-2:2020) EN IEC 62024-2:2020) (german version)
- ICS
- 29.100.10
- CCS
- 发布
- 2021-11-01
- 实施
- 2021-11-01
Fixed inductors for electromagnetic interference suppression - Part 1: Generic specification (IEC 60938-1:2021)
- ICS
- 29.100.10
- CCS
- 发布
- 2021-10-15
- 实施
- 2021-10-15
Transformers and inductors for use in electronic and telecommunication equipment - Measuring methods and test procedures (german version)
- ICS
- 29.100.10
- CCS
- 发布
- 2021-10-01
- 实施
- 2021-10-01
This part of IEC 62024 specifies the measuring methods of the rated direct current limits for small inductors. Standardized measuring methods for the determination of ratings enable users to accurately compare the current ratings given in various manufacturers´ data books.
High frequency inductive components - Electrical characteristics and measuring methods - Part 2: Rated current of inductors for DC-to-DC converters (IEC 62024-2:2020); German version EN IEC 62024-2:2020
- ICS
- 29.100.10
- CCS
- 发布
- 2021-10-00
- 实施
- 2021-10-01
Fixed inductors for electromagnetic interference suppression. Sectional specification on power line chokes
- ICS
- 29.100.10
- CCS
- L17
- 发布
- 2021-09-14
- 实施
- 2021-09-14
Test method for the mechanical strength of cores made of magnetic oxides
- ICS
- 29.100.10
- CCS
- 发布
- 20210913
- 实施
- 20210913
Terms and nomenclature for cores made of magnetically soft ferrites－Part 1：Terms used for physical irregularities
- ICS
- 29.100.10
- CCS
- 发布
- 20210913
- 实施
- 20210913
Ferrite cores ― Dimensions ― Part 8: E-cores
- ICS
- 29.100.10
- CCS
- 发布
- 20210913
- 实施
- 20210913
Fixed inductors for electromagnetic interference suppression – Part 2: Sectional specification on power line chokes
- ICS
- 29.100.10
- CCS
- 发布
- 2021-09-03
- 实施
- 2021-09-03
Terms and nomenclature for cores made of magnetically soft ferrites - Part 1: Terms used for physical irregularities and reference of dimensions (german version)
- ICS
- 29.100.10
- CCS
- 发布
- 2021-09-01
- 实施
- 2021-09-01
This corrigendum 1 corrects the formula (2), (3) ande (4) in the clause 3 \
Cores made of soft magnetic materials - Measuring methods - Part 2: Magnetic properties at low excitation level (IEC 62044-2:2005/COR1:2021); German version EN 62044-2:2005/AC:2021-06
- ICS
- 29.100.10
- CCS
- 发布
- 2021-09-00
- 实施
