29.130.20 低压开关装置和控制器 标准查询与下载

IEC 60947-6-2:2020 低压开关设备和控制设备. 第6-2部分: 多功能设备. 控制和保护开关器件(或设备)(CPS)

This document applies to control and protective switching devices (or equipment) (CPS), the main contacts of which are intended to be connected to circuits of rated voltage not exceeding 1000 V AC or 1500 V DC. It covers control and protective switching device (CPS): which provid

Low-voltage switchgear and controlgear - Part 6-2: Multiple function equipment - Control and protective switching devices (or equipment) (CPS)

T/GDMES 0022-2020 断零、缺相保护低压断路器

本文件规定了断零、缺相保护低压断路器(以下简称断路器)的分类、特性、产品数据和资料、正常工作和安装条件、结构与性能要求、试验、包装、运输和储存。

Low voltage circuit-breaker for fault neutral line and default phase protection

T/ZZB 1823-2020 12 kV六氟化硫气体绝缘环网开关设备和控制设备

本文件规定了12 kV六氟化硫气体绝缘环网开关设备和控制设备（以下简称环网柜）的术语和定义、基本要求、结构方案、环境条件、额定值、设计和结构、试验方法、检验规则、标志、包装、运输、贮存、安装及运行维护、安全、产品对环境的影响和质量承诺。 本文件适用于工厂装配的、额定电压为12 kV、户内安装的、频率为50 Hz、以六氟化硫气体为绝缘介质的环网开关设备和控制设备。

SF6 gas-insulated ring network switchgear and controlgear for rated voltage 12 kV

DIN EN 60947-2:2020 低压开关设备和控制设备. 第2部分: 断路器(IEC 60947-2-2016 + COR1-2016 + A1-2019); 德文版 EN 60947-2-2017 + A1-2020

This part of IEC 60947 series applies to circuit-breakers, intended to be installed and operated by instructed or skilled persons only, the main contacts of which are intended to be connected to circuits, the rated voltage of which does not exceed 1000 V a.c. or 1500 V d.c.; it a

Low-voltage switchgear and controlgear - Part 2: Circuit-breakers (IEC 60947-2:2016 + COR1:2016 + A1:2019); German version EN 60947-2:2017 + A1:2020

KS C IEC 61439-5-2020 低压开关设备和控制设备组件 第5部分：公共网络配电组件

Low-voltage switchgear and controlgear assemblies — Part 5: Assemblies for power distribution in public networks

IEC 60947-5-8:2020 RLV 低压开关设备和控制设备第5-8部分:控制电路装置和开关元件三位使能开关

Low-voltage switchgear and controlgear - Part 5-8: Control circuit devices and switching elements - Three-position enabling switches

IEC 60947-5-8:2020 低压开关柜和控制装置 - 第5-8部分:控制电路设备和开关元件 - 三位置使能开关

Low-voltage switchgear and controlgear - Part 5-8: Control circuit devices and switching elements - Three-position enabling switches

IEC 61439-2:2020 低压开关柜和控制装置 - 第2部分:电源开关和控制装置

Low-voltage switchgear and controlgear assemblies - Part 2: Power switchgear and controlgear assemblies

T/WHDQHX 001-2020 智能型低压成套电力开关设备和控制设备

       《智能型低压成套电力开关设备和控制设备》作为“武汉名品”评价认证依据，主要技术内容简述：配电柜做到安全可靠，不仅在全方位覆盖各行业低压配电需求的同时，亦能完美契合石油石化、采矿、核能等高安全标准行业的特定需求;针对石油石化行业对供电安全性和连续性的要求，提供智能化的电机控制和配电系统。        项目需要提高绝缘电压等级至Ui=1000V，增加额定运行电压Ue=400V/690V等级的使用需求，并增强内部燃弧防护；针对矿山、冶金等对环境耐受力和用电安全性的要求，对导电部件进行特殊的防腐处理，并提高柜体的IP防护等级；针对核电站对供电可靠性和地震耐受力的要求，对配电柜进行抗震级设计和试验检测。        通过数据采集、网络通讯与远程能源管理服务等途径，帮助用户实现智能监测、智能预警和智能控制；建立数据集中处理、集中分析、集中控制、及集中调度的新型现代化远程配电系统，实现远程管理、资产优化、预防性维护等智能化运营，帮助客户大幅提升安全效率、管理效率和能源效率。

Low-voltage switchgear and controlgear for intelligent assemblies

T/ZZB 1630-2020 自动转换开关电器

本标准规定了自动转换开关电器的术语和定义、分类和特性、基本要求、技术要求、试验方法、检验规则、标志、包装、运输和贮存、质量承诺。 本标准适用于交流50 Hz或60 Hz，额定电压不超过440 V，用于两路电源之间的转换，在转换过程中中断对负载供电的自动转换开关电器（以下简称ATSE）。

Automatic transfer switching equipment

IEC 60947-4-2:2020 低压开关设备和控制设备第4-2部分:接触器和电动机起动器半导体电动机控制器、起动器和软起动器

Low-voltage switchgear and controlgear – Part 4-2: Contactors and motor-starters – Semiconductor motor controllers, starters and soft-starters

IEC 61439-1:2020 RLV 低压开关设备和控制设备组件第1部分:总则

Low-voltage switchgear and controlgear assemblies - Part 1: General rules

EN IEC 61439-7:2020 低压开关设备和控制设备组件 第7部分：用于码头、露营地、集市广场、电动汽车充电站等特定应用的组件

Clause 1 of IEC 61439-1:2011 is applicable except as follows. Replacement: NOTE 1 Throughout this document, the terms AMHS (see 3.1.701), ACCS (see 3.1.702), AMPS (see 3.1.703), AEVCS (see 3.1.7704) are used for low-voltage switchgear and controlgear assemblies intended for use respectively in marinas and similar locations (AMHS), campsites and similar locations (ACCS), market squares and other similar external public sites (AMPS) and charging stations (AEVCS). The term ASSEMBLIES is used for indicating all these boards. This Part of IEC 61439 defines the specific requirements of ASSEMBLIES as follows: - ASSEMBLIES for which the rated voltage does not exceed 1 000 V in the case of AC or 1 500 V in the case of DC; - ASSEMBLIES intended for use in connection with the generation, transmission, distribution and conversion of electric energy, and for the control of electric energy consuming equipment; - ASSEMBLIES operated by ordinary persons (e.g. plug and unplug of electrical equipment); - ASSEMBLIES intended to be installed and used in market squares, marinas, campsites and other similar outdoor public sites; - ASSEMBLIES intended for charging stations for electric vehicles (AEVCS) for Mode 3 and Mode 4. They are designed to integrate the functionality and additional requirements for electric vehicle conductive charging systems according to IEC 61851-1:2017. For the correct SELECTION of the switching devices and components, the following standards apply: - IEC 60364-7-709 (AMHS) OR - IEC 60364-7-708 (ACCS) OR - IEC 60364-7-740 (AMPS) OR - IEC 60364-7-722 (AEVCS). This document applies to all ASSEMBLIES whether they are designed, manufactured and verified on a one-off basis or fully standardised and manufactured in quantity. The manufacture and/or assembly may be carried out other than by the original manufacturer (see 3.10.1 of IEC 61439-1:2011). This document does not apply to individual devices and self-contained components such as circuit breakers, fuse switches, electronic equipment, which comply with their relevant product standards. NOTE 2 Where electrical equipment is directly connected to public low voltage supply system and equipped with a meter for billing of the legal provider of the low voltage supply, additional particular requirements based on national regulations apply, if any. This document does not apply to boxes and enclosures for electrical accessories for household and similar fixed electrical installations as defined in IEC 60670-24.

Low-voltage switchgear and controlgear assemblies - Part 7: Assemblies for specific applications such as marinas, camping sites, market squares, electric vehicle charging stations

T/ZZB 1576-2020 时间继电器

本标准规定了时间继电器的术语和定义、基本要求、分类、技术要求、试验方法、检验规则、标志、包装、运输和储存、质量承诺。 本标准适用于额定交流电压415 V及以下、频率50 Hz或60 Hz和直流电压220 V及以下的电路中作为时间控制、指示等用途的数字式时间继电器（以下简称继电器）。

Time relay

IEC TS 63107:2020 根据IEC 61439-2 在电力开关设备和控制设备组件（PSC组件）中集成内部电弧故障缓解系统

Integration of internal arc-fault mitigation systems in power switchgear and controlgear assemblies (PSC？Assemblies) according to IEC 61439-2

IEC 60947-3:2020 低压开关柜和控制柜 - 第3部分:开关 隔离开关 隔离开关和保险丝组合单元

Low-voltage switchgear and controlgear - Part 3: Switches, disconnectors, switch-disconnectors and fuse-combination units

IEC 60947-1:2020 低压开关设备和控制设备第1部分:总则

Low-voltage switchgear and controlgear - Part 1: General rules

JB/T 2290-2020 船用低压接触器和交流电动机起动器

Marine low voltage contactors and AC motor starters

IEC TS 63208:2020 低压开关设备和控制设备.安全方面

Low-voltage switchgear and controlgear - Security aspects

EN 62026-3:2015/A11:2020 低压开关设备和控制设备.控制器接口(CDIs).第3部分:DeviceNet 包含修改件A11,2020

IEC 62026-3:2014 specifies an interface system between single or multiple controllers, and control circuit devices or switching elements. The interface system uses two conductor pairs within one cable - one of these pairs provides a differential communication medium and the other pair provides power to the devices. This part establishes requirements for the interoperability of components with such interfaces. This third edition of IEC 62026-3 cancels and replaces the second edition published in 2008. This third edition constitutes a technical revision. The main changes with respect to the previous edition are the followings: - specification of group 4 messages (5.1.2); - clarifications on messaging protocol (5.2); - addition of I/O multicast poll messages (5.5.2 and 5.5.8); - clarifications on slave behaviour (5.5.4 and 5.5.9); - clarifications on physical layer (transceiver) in 5.7; - miscellaneous corrections/clarifications on cable (8.2); - clarifications on EMC testing (9.2.10) and logical testing (9.3).

Low-voltage switchgear and controlgear - Controller-device interfaces (CDIs) - Part 3: DeviceNet