共找到 2258 条与 变压器、电抗器、电感器 相关的标准,共 151 页
Safety of transformers, reactors, power supply units and combinations thereof - Part 2-2: Particular requirements and tests for control transformers and power supply units incorporating control transf
Safety of transformers, reactors, power supply units and combinations thereof - Part 2-13: Particular requirements and tests for auto-transformers and power supply units incorporating auto-transformer
Safety of transformers, reactors, power supply units and combinations thereof - Part 2-13: Particular requirements and tests for auto-transformers and power supply units incorporating auto-transformer
Power transformers-Part 8:Application guide
1 Scope This document describes the special tests for Medium Power Transformers ≤ 3150 kVA compliant with the EN 50708‑2 series: — for corrugated tank for liquid immersed transformers, — for the method of measurement of losses for one winding in Highest Voltage (HV) and windings in Lowest Voltage (LV) for liquid immersed and dry type transformers.
Power transformers. Additional European requirements - Medium power transformer - Special tests
This document defines the energy performance of non-conventional technology Medium Power Transformers in compliance with EN 50708-1-1.
Power transformers. Additional European requirements - Medium power transformers. Nonconventional magnetic steel technology
前言 1 范围 2 规范性引用文件 3 术语和定义 4 装置组成 5 工作条件 6 技术要求 7 试验项目及方法 8 检验规则 9 标志、包装、运输、贮存 附录A(规范性)特高频局部放电在线监测装置图谱数据格式规范
UHF partial discharge on-line monitoring device of transformer——Technical specification
本标准规定了电气化铁路用2×27.5kV高效节能自耦变压器的术语和定义、性能参数、要求、试验及试验方法、检验规则、标志、起吊、运输和贮存。 本标准适用于具有公用和串联绕组的电气化铁路用2×27.5kV高效节能自耦变压器。
High-efficiency and energy-saving autotransformer for electrified railway
本标准规定了电气化铁路牵引变电所用牵引变压器的术语和定义、型式、性能参数、要求、试验及试验方法、检验规则、标志、包装、运输和贮存。 本标准适用于电压等级为110kV、220kV,额定容量为6300kVA~90000kVA、额定频率为50Hz的牵引变压器。
High-efficiency energy-saving intelligent traction transformer
Safety of transformers, reactors, power supply units and combinations thereof - Part 2-15: Particular requirements and tests for isolating transformers for medical IT systems for the supply of medical
本文件规定了电力变压器直流偏磁的多参量监测方法以及基于多参量监测的变压器直流偏磁影响程度的评估方法。 本文件适用于系统电压等级为110kV及以上电力变压器的直流偏磁多参量监测,以及变压器直流偏磁影响程度的评估。其它电压等级参照执行。
Guideline for multi parameters monitoring and the evaluation of transformers DC magnetic bias
本文件规定了直流牵引供电系统杂散电流引起的变压器中性点电流监测工作条件、监测技术要求、测量及统计方法。 本标准适用于110kV及以上电压等级的中性点接地变压器,因直流牵引供电系统杂散电流引起的直流偏磁监测及统计,其它电压等级的直接接地系统参照执行。
Monitoring and statistical method of transformer neutral point current caused by the stray current in DC traction power system
本文件规定了电气化铁路直接供电方式用三相Vv联结天然酯绝缘油牵引变压器的使用条件、产品型号、性能参数、技术要求、试验分类和试验项目、试验要求及试验方法、标志、运输及贮存等。
Three phase Vv connection traction transformer of natural esters insulating oil for electrified railway
本文件规定了电气化铁路用天然酯绝缘油2×27.5kV自耦变压器的产品型号、基本参数、技术要求、试验分类及试验项目、标志,起吊、运输及贮存。
Auto transformer of natural esters insulating oil for electrified railway
BS EN 50708-3-1. Power transformers. Additional European requirements. - Part 3-1. Large power transformer. General requirements
本文件规定了10 kV三相油浸式铝锆合金绕组配电变压器的术语和定义、性能参数、技术要求、检验规则及方法、标志、起吊、包装、运输和贮存。 本文件适用于电压为10 kV,额定频率为50 Hz,额定容量为30 kV.A~2500 kV.A的三相油浸式铝锆合金绕组配电变压器,6 kV同类变压器可参照使用。
Specification and technical requirements for 10kV three-phase oil-immersed aluminum zirconium alloy coil distribution transformers
Mineral oil-filled electrical equipment in service - Guidance on the interpretation of dissolved and free gases analysis
Mineral oil-filled electrical equipment in service - Guidance on the interpretation of dissolved and free gases analysis
Technical Guidelines for Voltage Transformers on the Outlet Side of Generators
IEC 60076-22-7:2020 applies to a selection of accessories and fittings mounted on liquid immersed power transformers according to IEC 60076-1 and reactors according to IEC 600766 with or without conservator for indoor or outdoor installation. It outlines the service conditions and the mechanical requirements that are common to all the accessories and fittings. This document also outlines the operation requirements specific to each device as well as the preferred dimensions relevant for interchangeability and the type and routine test to be performed.This document covers an exhaustive selection of the accessories and fittings that are currently used on transformers or reactors.
Power transformers - Part 22-7: Power transformer and reactor fittings - Accessories and fittings
Copyright ©2007-2022 ANTPEDIA, All Rights Reserved
京ICP备07018254号 京公网安备1101085018 电信与信息服务业务经营许可证:京ICP证110310号