29.180 变压器、电抗器、电感器 标准查询与下载

T/CEEIA 706-2023 高压/特高压换流变压器 关键部件燃弧试验对环境影响及治理指南

本文件给出了高压/特高压换流变压器关键部件燃弧试验后的影响环境有害因素,废水、废油的收集与分离，废油、废气的收集与分离，废水、废油、废气处理的指导。 本文件适用于指导开展高压/特高压换流变压器关键部件在试验室进行燃弧试验后的环境治理，其他液体绝缘电气设备也适用。

Guideline for environmental effects and treatment of key components arcing test of HV/UHV converter transformers

T/CEEIA 705-2023 电力变压器抗地震试验导则

本文件规定了电力变压器抗地震试验的试验条件、试验准备、试验和试验文件等。 本文件适用于电力变压器抗震试验,包括其与地面、杆塔上连接的刚性支撑架构。其他电抗器、互感器等线圈类设备的抗地震试验可参照执行。

Guidelines on seismic test for power transformers

GSO IEC 60076-22-4:2023 电力变压器 第22-4部分：电力变压器和电抗器配件 液体与水热交换器绝缘

IEC 60076-22-4:2019 applies to liquid to water heat exchangers, using forced water and forced liquid circuits, used on liquid immersed power transformers according to IEC 60076-1 and reactors according to IEC 60076-6 with and without conservator for indoor or outdoor installation. It outlines the service conditions and the mechanical and electrical requirements that are common to this equipment. It also outlines the operation requirements specific to this equipment as well as the preferred dimensions relevant for interchangeability and the type and routine tests to be performed. Keywords: insulating liquid to air heat exchangers in the cooling circuits of power transformers and reactors.

Power transformers - Part 22-4: Power transformer and reactor fittings - Insulating liquid to water heat exchangers

GSO IEC 60076-21:2023 电力变压器 第21部分：步进电压调节器的标准要求、术语和测试代码

IEC 60076-21:2018 describes electrical, mechanical and test requirements of liquid-immersed, single- and three-phase, 50 Hz and 60 Hz, self and forced-air cooled, distribution, overhead and substation, step-voltage regulators, 1 000 kVA (single-phase units) or 3 000 kVA (three-phase units) and smaller, 34 500 volts and below (2 400 V minimum) and their associated controls. Requirements, references and definitions relevant to either IEC or IEEE contexts are given and their use is described in Clause 4. This publication is published as an IEC/IEEE Dual Logo standard. This second edition cancels and replaces IEC 60076-21, published in 2011, and IEEE Std C57.15-2009. This edition includes the following significant technical changes with respect to IEC 60076­21:2011/IEEE Std C57.15-2009: a) updated list of normative and bibliography IEC and IEEE references and their associated text; b) updated tables of preferred ratings for inclusion of maximum system voltage (Um), nominal system voltage and rated voltage (Ur); c) inclusion of tables for optional fan-cooled ratings, external dielectric clearances and sound pressure levels; d) revision of short-circuit requirements for distribution and substation voltage regulators; e) inclusion of an universal interface between control enclosure and apparatus; f) inclusion of tap-changer routine and type tests; g) inclusion of audible sound pressure emissions test procedures; h) inclusion of tank enclosure integrity type test procedures; i) update of control environmental IEC reference test standard. Keywords: step-voltage regulators

Power transformers - Part 21: Standard requirements, terminology, and test code for step-voltage regulators

GSO IEC 60076-22-1:2023 电力变压器 第22-1部分：电力变压器和电抗器配件 保护装置

IEC 60076-22-1:2019 applies to protective devices mounted on liquid-immersed power transformers in accordance with IEC 60076-1 and reactors in accordance with IEC 60076-6 with or without conservator for indoor or outdoor installation. It outlines the service conditions and the mechanical and electrical requirements that are common to all the devices, which are relevant for the safety of the machine having a function of signalization of abnormal operating conditions. It also outlines the operation requirements specific to each device as well as, in some cases, the preferred dimensions relevant for interchangeability and the type and routine test to be performed. Keywords: protective devices mounted on liquid-immersed power transformers

Power transformers - Part 22-1: Power transformer and reactor fittings - Protective devices

GSO IEC 60076-22-8:2023 电力变压器 第22-8部分：电力变压器和电抗器配件 适用于通信网络的设备

IEC 60076-22:2021 applies to a selection of accessories and fittings mounted on liquid immersed power transformers according to IEC 60076-1 and reactors according to IEC 60076-6 with or without conservator for indoor or outdoor installation. It outlines the operation requirements specific to each device as well as the data made available to the communication network and the type and routine test to be performed.

Power transformers - Part 22-8: Power transformer and reactor fittings - Devices suitable for use in communication networks

23/30478734 DC BS EN 50708-1-1 电源变压器 附加欧洲要求 第1-1部分 共同部分 一般要求

BS EN 50708-1-1. Power transformers. Additional European requirements - Part 1-1. Common part. General requirements

DB65/T 4665-2023 特殊环境下电力用电流互感器技术规范

Technical specifications for current transformers for power use in special environments

DB65/T 4657-2023 配电变压器短路承受能力试验储能式电源技术导则

Technical Guidelines for Storage Power Sources on Distribution Transformer Short-Circuit Withstand Capacity Test

23/30476512 DC BS EN IEC/IEEE 60076-57-1202:2023/prAA:2023 电源变压器 第57-1202部分 液浸式移相变压器

BS EN IEC/IEEE 60076-57-1202:2023/prAA:2023. Power transformers - Part 57-1202. Liquid immersed phase-shifting transformers

T/HEBQIA 178-2023 高频变压器

本文件规定了高频变压器的使用条件及分类、要求、试验方法、检验规则、铭牌、标志、包装、运输及贮存等。

High frequency transformer

IEC 61558-2-3-EXV-RLV:2023 变压器、电抗器、电源装置及其组合的安全.第2-3部分:燃气和油燃烧器用点火变压器的特殊要求和试验

Safety of transformers, reactors, power supply units and combinations thereof - Part 2-3: Particular requirements and tests for ignition transformers for gas and oil burners

IEC 61558-2-7-EXV-RLV:2023 变压器、电抗器、电源装置及其组合的安全.第2-7部分:玩具用变压器和电源装置的特殊要求和试验

Safety of transformers, reactors, power supply units and combinations thereof - Part 2-7: Particular requirements and tests for transformers and power supply units for toys

IEC 61558-2-3:2023 EXV 变压器、电抗器、电源装置及其组合的安全.第2-3部分:燃气和油燃烧器用点火变压器的特殊要求和试验

Safety of transformers, reactors, power supply units and combinations thereof - Part 2-3: Particular requirements and tests for ignition transformers for gas and oil burners

IEC 61558-2-7:2023 EXV 变压器、电抗器、电源装置及其组合的安全.第2-7部分:玩具用变压器和电源装置的特殊要求和试验

Safety of transformers, reactors, power supply units and combinations thereof - Part 2-7: Particular requirements and tests for transformers and power supply units for toys

23/30474906 DC BS EN IEC 60076-1 电力变压器 第 1 部分：概述

BS EN IEC 60076-1. Power transformers - Part 1. General

23/30474910 DC BS EN IEC 60076-2 电力变压器 第 2 部分：液浸式变压器的温升

BS EN IEC 60076-2. Power transformers - Part 2. Temperature rise for liquid-immersed transformers

DL/T 267-2023 油浸式全密封卷铁心配电变压器使用技术条件

本文件规定了油浸式全密封卷铁心配电变压器（以下简称“变压器”）的使用条件、性能参数、技术要求、试验要求等。 本文件适用于电压等级为6kV～20kV、额定频率为50Hz、无励磁调压、额定容量为5kVA～160kVA的单相变压器和额定容量为30kVA～2500kVA的三相变压器。 本文件不适用于非晶合金卷铁心变压器。

Technical conditions for use of oil-immersed fully sealed rolled core distribution transformers

DL/T 1400.3-2023 变压器测试仪校准规范 第3部分：油浸式变压器测温装置

本文件规定了油浸式电力变压器（电抗器、换流变压器）测温装置（以下简称“测温装置”）的计量特性、校准条件、校准项目和校准方法、校准结果表达、复校时间间隔的要求等。 本文件适用于测温装置的实验室校准、现场校准，不适用于光纤传感器测温装置的校准。

Calibration specifications for transformer testers Part 3: Oil-immersed transformer temperature measurement device

DL/T 2622-2023 1000kV高压并联电抗器局部放电现场测量技术导则

本文件规定了1000kV高压并联电抗器（以下简称高抗）现场局部放电测量的试验要求、试验方法、现场干扰的抑制措施。 本文件适用于额定频率为50Hz、电压等级为1000kV的单相油浸式高抗局部放电现场测量，用以现场考核1000kV电抗器在运输和现场安装后的绝缘性能。现场绝缘诊断性试验可参照执行。

Technical Guidelines for On-site Measurement of Partial Discharge of 1000kV High Voltage Shunt Reactor