29.200 整流器、转换器、稳压电源 标准查询与下载

T/ZZB 2779-2022 电动自行车交流充电桩

本文件规定了电动自行车交流充电设备的术语和定义、基本要求、技术要求、试验方法、检验规则、标志、包装、运输、贮存和安装、质量承诺。 本文件适用于电动自行车或类似电动车辆用交流充电桩（简称：充电桩） 。

Ac charging pile for electric bicycle

T/CEC 605-2022 电力系统站用电源运维管控平台技术导则

本文件规定了电力系统站用电源运维管控平台（简称管控平台）的总体架构，监视与告警、操作控制、统计分析与指导管理、培训演练、平台维护各类应用和性能指标等要求。 本文件适用于管控电力系统运维职责区域内多个变电站和换流站中站用电源运维业务的运维管控平台。

Technical guidelines for power supply operation and maintenance management and control platform for power system stations

T/CEC 446.4-2022 电力用锂电池直流电源系统 第4部分：间歇充电式直流电源设备

本文件规定了电力用锂电池直流电源系统间歇充电式直流电源设备基本参数、技术要求、试验方法、检验规则、标志、标签和随行文件、包装、运输和贮存等要求。 本文件适用于35 kV～220 kV变电站中采用磷酸铁锂电池的站用直流电源系统间歇充电式直流电源设备，是产品设计、制造、检验和使用的依据，220 kV以上电压等级的变电站和其他电力设施可参照使用。

Lithium battery DC power supply system for electric power Part 4: Intermittent charging DC power supply equipment

T/CASMES 27-2022 电动自行车充电桩技术要求

本文件规定了电动自行车充电桩（以下简称“充电桩”）的产品分类、要求、试验方法、检验规则、标志、包装、运输和贮存。 本文件适用于电动自行车用充电桩的生产。

Technical requirements for electric bicycle charging piles

IEC 62477-1:2022 电力电子变换器系统和设备的安全要求第1部分:总则

Safety requirements for power electronic converter systems and equipment - Part 1: General

BS EN 60700-1:2015+A1:2021 修正案 1 高压直流 (HVDC) 输电用晶闸管阀 - 第 1 部分：电气测试

Amendment 1 - Thyristor valves for high voltage direct current (HVDC) power transmission - - Part 1: Electrical testing

YD/T 4006-2022 信息通信用10kV交流输入的直流不间断电源系统

10kV AC input DC uninterruptible power supply system for information and communication

BS EN 60700-2:2016+A1:2021 用于高压直流 (HVDC) 输电的晶闸管阀 术语

Thyristor valves for high voltage direct current (HVDC) power transmission - Terminology

SN/T 5434-2022 进口直流稳压电源检验鉴定方法 性能

Performance of inspection and identification methods for imported DC regulated power supplies

22/30447579 DC BS EN 63419 氮化镓功率转换器件开关可靠性评估程序指南

BS EN 63419. Guideline for Switching Reliability Evaluation procedures for Gallium Nitride Power Conversion Devices

T/FSYY 0054-2021 通信行业电池梯次利用企业分类及能力要求

通信行业电池梯次利用企业分类及能力要求

Enterprise classification and capability requirements of battery echelon utilization in communication industry

T/FSYY 0049-2021 退役动力电池梯次利用产品 通信行业用电池管理系统

退役动力电池梯次利用产品 通信行业用电池管理系统

Retired power battery echelon utilization product — Battery management system for communication industry

NB/T 10902-2021 20kW及以下非车载充电机技术条件及安装要求

Technical conditions and installation requirements for off-board chargers of 20kW and below

T/CEEIA 541-2021 风力发电机组线束技术规范

本文件规定了风力发电机组线束加工的通用方法和要求。 本文件适用于标称电压低于3 kV及以下电压等级的风力发电机组用线束。

Technical specification for cable harness of wind turbine generator system

T/CEEIA 540-2021 风力发电机组偏航储能后备电源技术规范

本文件规定了风力发电机组偏航储能后备电源系统（以下简称偏航储能后备电源系统）的定义、技术要求、环境测试、检验规则、标志、包装、运输、贮存等。 本文件适用于风力发电机组偏航电化学储能后备电源系统，作为设计、制造、试验和认证的依据。

Technical specification of energy storage system for wind turbine yaw system backup power supply

EN 60335-2-29:2021 家用及其类似用途电器的安全.第2部分第29节:充电器的特殊要求

IEC 60335-2-29:2016 is available as IEC 60335-2-29:2016 RLV which contains the International Standard and its Redline version, showing all changes of the technical content compared to the previous edition. IEC 60335-2-29:2016 deals with the safety of electric battery chargers for household and similar use having an output not exceeding 120 V ripple-free direct current, their rated voltage being not more than 250 V. Battery chargers intended for charging batteries in a household end use application outside the scope of the IEC 60335 series of standards are within the scope of this standard. Requirements for battery chargers for use by children at least 8 years old without supervision are given in Annex AA. Battery chargers not intended for normal household use, but which nevertheless may be a source of danger to the public, such as battery chargers intended for use in garages, shops, light industry and on farms, are within the scope of this standard. As far as is practicable, this standard deals with the common hazards presented by appliances that are encountered by all persons in and around the home. However, in general, it does not take into account persons (including children) whose physical, sensory or mental capabilities; or lack of experience and knowledge prevents them from using the appliance safely without supervision or instruction; children playing with the appliance. This standard does not apply to built-in: - battery chargers, except those for installing in caravans and similar vehicles; - battery chargers that are part of an appliance, the battery of which is not accessible to the user; - battery chargers intended exclusively for industrial purposes; - battery chargers intended to be used in locations where special conditions prevail, such as the presence of a corrosive or explosive atmosphere (dust, vapour or gas); - battery chargers for emergency lighting or supply units for electronic equipment. This fifth edition cancels and replaces the fourth edition published in 2002 including its Amendment 1 (2004) and its Amendment 2 (2009). It constitutes a technical revision. The principal changes in this edition as compared with the fourth edition of IEC 60335-2-29 are as follows (minor changes are not listed): - Revised the drop test to refer to IEC 60068-2-31 (21.101); - Requirements for supply cords on battery chargers used at low temperatures (25.7); - Requirements for battery chargers having an output voltage exceeding SELV have been added (1, 3.2.2, 3.4.3, 10.101, 24.4, 25.5, 25.7, 25.8, 25.15. 26.5); - A classification for battery chargers used outdoors has been added (6.2, 29.2) and some notes in Clause 1, Subclauses 7.1 and 22.102, Figure 101 and Annex AA 11.8 have been converted to normative text. It was established on the basis of the fifth edition (2010) of that standard. The attention of National Committees is drawn to the fact that equipment manufacturers and testing organizations may need a transitional period following publication of a new, amended or revised IEC publication in which to make products in accordance with the new requirements and to equip themselves for conducting new or revised tests. It is the recommendation of the committee that the content of this standard be adopted for implementation nationally not earlier than 12 months or later than 36 months from the date of its publication. Key words: Battery, Battery Charger This publication is to be read in conjunction with IEC 60335-1:2010.

Household and similar electrical appliances - Safety - Part 2-29: Particular requirements for battery chargers

YD/T 2657-2021 通信用高温型阀控式铅酸蓄电池

High-temperature valve-regulated lead-acid battery for communications

T/HAS 111-2021 电动自行车充电桩技术条件

本文件规定了电动自行车充电桩的术语和定义、产品分类、技术要求和试验方法。 本文件适用于电动自行车用直流充电桩（以下简称“充电桩”）。

Technical requirements of charging pile for electric bicycles

OVE EN 62477-1/A12-2021 电力电子转换器系统和设备的安全要求 第1部分：总则（修正案）（德文版）

Safety requirements for power electronic converter systems and equipment - Part 1: General (Amendment) (german version)

OVE EN IEC 62751-1/A2:2021 高压直流（HVDC）系统的电压源换流器（VSC）阀的功率损耗 第1部分：一般要求（IEC 22F/648/CDV）（英文版）（修正案）

Power losses in voltage sourced converter (VSC) valves for high-voltage direct current (HVDC) systems - Part 1: General requirements (IEC 22F/648/CDV) (english version) (Amendment)