29.240.30 标准查询与下载



共找到 180 条与 相关的标准,共 12

本标准适用于矿山在用高压开关设备电气定期检验、新安装投运前及交接验收检验。本标准不适用于产品出厂检验、大修后检验。

Specifications for electrical safety testing and inspection of high-voltage switchgear in use in mines

ICS
29.240.30
CCS
K43
发布
2013-09-22
实施
2013-10-30

Automatic disconnection device between a generator and the public low-voltage grid

ICS
29.240.30
CCS
K43
发布
2013-08
实施
2013-08-01

本标准规定了配电自动化远方终端及子站的技术要求、功能规范、试验方法和检验规则等。本标准适用于10kV及以上配电网配电自动化远方终端(以下简称配电自动化终端)及子站的生产、使用、检测和验收。

Remote terminal unit of distribution automation

ICS
29.240.30
CCS
K51
发布
2013-03-07
实施
2013-08-01

Distribution boards for industrial and social buildings. General specifications

ICS
29.240.30
CCS
发布
2013
实施
2015-01-01

Distribution boards for dwelling-houses. General specifications

ICS
29.240.30
CCS
发布
2013
实施
2015-01-01

Input-distributional boards for dwellings and public buildings. General specifications

ICS
29.240.30
CCS
发布
2013
实施
2015-01-01

本标准规定了大型发电机变压器继电保护的整定计算原则和方法,它是设计、科研、运行、调试和制造部门整定计算的依据。本标准适用于GB/T 14285-2006所规定的发电机、变压器容量范围,重点规定了 300MW及以上发电机与220kV及以上变压器的继电保护的整定计算原则和方法。小容量发电机、低电压等级变压器的整定计算参考执行。

Guide of calculating setting of relay protection for large generator and transformer

ICS
29.240.30
CCS
K45
发布
2012-04-06
实施
2012-07-01

Automatic disconnection device between a generator and the public low-voltage grid; Amendment 1

ICS
29.240.30
CCS
K32
发布
2012-02-01
实施
2012-02-01

Technical Specifications for Quick Load Shedding Test of Thermal Power Units in Hubei Power Grid

ICS
29.240.30
CCS
K 52
发布
2012-01-06
实施
2012-04-01

Hubei power grid automation substation equipment access specification

ICS
29.240.30
CCS
L 86
发布
2012-01-06
实施
2012-04-01

Hubei Power Grid Power Plant Automatic Voltage Control (AVC) Substation Technical Specifications

ICS
29.240.30
CCS
F 22
发布
2012-01-06
实施
2012-04-01

IEEE Standard for Power Electronics Open System Interfaces in Zonal Electrical Distribution Systems Rated Above 100 kW

ICS
29.240.30
CCS
F21
发布
2012
实施

本标准规定了继电保护微机型试验试验装置的产品分类、技术要求、检验方法及验收规则、包装、运输、贮存、标志、标签、使用说明书、供货的成套性及质量保证等。 本标准适用于各类电气继电器、继电保护及安全自动化装置的微机型试验装置。

Technical specifications of test equipment based on micro-computer for protection equipment

ICS
29.240.30
CCS
K45
发布
2011-01-09
实施
2011-05-01

本标准规定了发电机变压器组保护装置的通用技术条件、检验方法、检验规则及对标志、包装、运输、储存的要求。 本标准适用于火电厂、水电厂、核电站等所用的发电机变压器组保护装置,并作为装置的设计、制造、试验和运行的依据。也适用于下列保护装置: -发电机保护装置; -电厂用主变压器保护装置; -高压厂用变压器保护装置; -高压启动/备用变压器保护装置; -励磁变压器/励磁机保护装置。

General specifications for generator-transformer unit protection equipment

ICS
29.240.30
CCS
K45
发布
2011-01-09
实施
2011-05-01

本标准规定母线保护装置的通用技术条件和要求、试验方法、检验规则以及对标志、包装、运输、贮存的要求。 本标准适用于110kV及以上电压等级的母线保护装置,是产品设计、制造、检验和应用的依据。

General specification for busbar protection equipment

ICS
29.240.30
CCS
K45
发布
2011-01-09
实施
2011-05-01

Electricity metering. Tariff and load control. Particular requirements for electronic ripple control receivers

ICS
29.240.30
CCS
发布
2011
实施
2013-01-01

IEC 61975:2010(E) applies to system tests for high-voltage direct current (HVDC) installations which consist of a sending terminal and a receiving terminal, each connected to an a.c. system. The tests specified in this standard are based on bidirectional and bipolar high-voltage direct current (HVDC) installations which consist of a sending terminal and a receiving terminal, each connected to an a.c. system. The test requirements and acceptance criteria should be agreed for back-to-back installations, while multi-terminal systems and voltage sourced converters are not included in this standard. For monopolar HVDC installations, the standard applies except f

High-voltage direct current (HVDC) installations - System tests

ICS
29.240.30
CCS
发布
2010-12-04
实施
2010-12-04

The scope of this guide is to define and characterize control architecture for high-power electronics from power semiconductor device levels to the power system level. This guide covers the application of power electronics in the areas of Power Quality/Custom Power, Flexible AC Transmission Systems (FACTS), High Voltage DC Transmission (HVDC), Distributed Generation, Energy Storage applications, etc. with a power range from hundreds of kW to thousands of MW, but with emphasis on the 1 MW to hundreds of MW.

Guide for Control Architecture for High Power Electronics (1 MW and Greater) Used in Electric Power Transmission and Distribution Systems

ICS
29.240.30
CCS
K43
发布
2010
实施

本标准规定了电力系统同步数字系列光缆传输系统的设计要求,电力特种光缆线路设计以及光纤通信站设计等规定和要求。 本标准适用于新建SDH干线光缆通信工作设计。改建、扩建和支线SDH光缆通信工程设计,可参照本标准执行。 本标准适用于利用架空输电线路敷设的光纤复合架空地线(OPGW),加挂于架空输电线路的非金属自承式光缆(ADSS)等特种光缆通信工程的设计。

Technical rule of electric power system engineering design for SDH optical fiber cable communication project

ICS
29.240.30
CCS
P76;F21
发布
2007-12-03
实施
2008-06-01

本标准规定了数字式保护测控装置的术语和定义、技术要求、试验、检验规则、标志、包装、运输及贮存。 本标准适用于3kV~66kV电压等级线路、电容器、变压器、电抗器、电动机等电气设备的数字式保护测控装置(以下简称“装置”),作为这些装置设计、制造、试验和使用的依据。 对于应用于其他场合的装置,可参考使用本标准。

General specifications for numerical integrated protection and control equipment

ICS
29.240.30
CCS
K45
发布
2007-12-03
实施
2008-06-01



Copyright ©2007-2022 ANTPEDIA, All Rights Reserved
京ICP备07018254号 京公网安备1101085018 电信与信息服务业务经营许可证:京ICP证110310号