31.040.30 热敏电阻器 标准查询与下载

IEC 60738-1-3:2008 IEC 60738-1-3:热敏电阻器.直热式阶梯函数正温度系数.第1-3部分:空白详细规范.浪涌电流应用.评定等级EZ

1.1 Method(s) of mounting (to be inserted) (See IEC 60738-1:2006, 7.30). 1.2 Dimensions (All dimensions are in millimetres or inches and millimetres; it shall be stated which dimensions are suitable for gauging). Dimensioned drawing(s) shall be given in the detail specification. If necessary, the dimensions may be listed in tabular form with reference to styles or codes. 1.3 Coating The detail specification shall state: a) whether the thermistor is insulated or non-insulated; b) the material; c) the colour, if applicable. 1.4 Terminations The detail specification shall state whether the terminations are suitable for soldering. If they are not, suitable methods of connection shall be stated for example: welding, clamping or crimping. 1.5 Flammability The detail specification shall state whether the thermistor is actively or passively flammable if applicable. The test method shall be given in the test schedule. 1.6 Resistance to solvents The detail specification shall state whether the coating and the marking of the thermistor are solvent resistant if applicable. The test methods shall be given in the test schedule. 1.7 Packaging The detail specification shall give the following information (if required): a) whether bulk packed or taped and if taped, drawing or references; b) the dimensions of the immediate packaging and the number of thermistors packed; c) the dimensions of the outer package and the number of immediate packages; d) methods of disposal of the packaging material.

IEC 60738-1-3: Thermistors - Directly heated positive step-function temperature coefficient - Part 1-3: Blank detail specification - Inrush current application - Assessment level EZ

IEC 60738-1-4:2008 热敏电阻器.直热式阶梯函数正温度系数.第1-4部分:空白详细规范.敏感设备.评定等级EZ

1.1 Method(s) of mounting (to be inserted) (See IEC 60738-1:2006, 7.30). 1.2 Dimensions (All dimensions are in millimetres or inches and millimetres; it shall be stated which dimensions are suitable for gauging). Dimensioned drawing(s) shall be given in the detail specification. If necessary, the dimensions may be listed in tabular form with reference to styles or codes. 1.3 Coating The detail specification shall state: a) whether the thermistor is insulated or non-insulated; b) the material; c) the colour, if applicable. 1.4 Terminations The detail specification shall state whether the terminations are suitable for soldering. If they are not, suitable methods of connection shall be stated for example: welding, clamping or crimping. 1.5 Flammability The detail specification shall state whether the thermistor is actively or passively flammable if applicable. The test method shall be given in the test schedule. 1.6 Resistance to solvents The detail specification shall state whether the coating and the marking of the thermistor are solvent resistant if applicable. The test methods shall be given in the test schedule.

Thermistors - Directly heated positive step-function temperature coefficient - Part 1-4: Blank detail specification - Sensing application - Assessment level EZ

IEC 60738-1-2:2008 热敏电阻器.直热式阶梯函数正温度系数.第1-2部分:空白详细规范.加热元件的应用.评定等级EZ

1.1 Method(s) of mounting (to be inserted) (See IEC 60738-1:2006, 7.30). 1.2 Dimensions (All dimensions are in millimetres or inches and millimetres; it shall be stated which dimensions are suitable for gauging). Dimensioned drawing(s) shall be given in the detail specification. If necessary, the dimensions may be listed in tabular form with reference to styles or codes. 1.3 Coating The detail specification shall state a) whether the thermistor is insulated or non-insulated, b) the material, c) the colour, if applicable. 1.4 Terminations The detail specification shall state whether the terminations are suitable for soldering. If they are not, suitable methods of connection shall be stated for example: welding, clamping or crimping. 1.5 Flammability The detail specification shall state whether the thermistor is actively or passively flammable if applicable. The test method shall be given in the test schedule. 1.6 Resistance to solvents The detail specification shall state whether the coating and the marking of the thermistor are solvent resistant if applicable. The test methods shall be given in the test schedule. 1.7 Packaging The detail specification shall give the following information (if required): a) whether bulk packed or taped and if taped, drawing or references; b) the dimensions of the immediate packaging and the number of thermistors packed; c) the dimensions of the outer package and the number of immediate packages; d) methods of disposal of the packaging material.

Thermistors - Directly heated positive step-function temperature coefficient - Part 1-2: Blank detail specification - Heating element application - Assessment level EZ

IEC 60738-1-1:2008 热敏电阻器.直热式阶梯函数正温度系数.第1-1部分:空白详细规范.限流的应用.评定等级EZ

1.1 Method(s) of mounting (to be inserted) (See IEC 60738-1:2006, 7.30). 1.2 Dimensions (All dimensions are in millimetres or inches and millimetres; it shall be stated which dimensions are suitable for gauging). Dimensioned drawing(s) shall be given in the detail specification. If necessary, the dimensions may be listed in tabular form with reference to styles or codes. 1.3 Coating The detail specification shall state a) whether the thermistor is insulated or non-insulated, b) the material, c) the colour, if applicable. 1.4 Terminations The detail specification shall state whether the terminations are suitable for soldering. If they are not, suitable methods of connection shall be stated for example: welding, clamping or crimping. 1.5 Flammability The detail specification shall state whether the thermistor is actively or passively flammable if applicable. The test method shall be given in the test schedule. 1.6 Resistance to solvents The detail specification shall state whether the coating and the marking of the thermistor are solvent resistant if applicable. The test methods shall be given in the test schedule. 1.7 Packaging The detail specification shall give the following information (if required): a) whether bulk packed or taped and if taped, drawing or references; b) the dimensions of the immediate packaging and the number of thermistors packed; c) the dimensions of the outer package and the number of immediate packages;

Thermistors - Directly heated positive step-function temperature coefficient - Part 1-1: Blank detail specification - Current limiting application - Assessment level EZ

IEC 60539-1:2008 直热式负温度系数热敏电阻器.第1部分:总规范

This part of IEC 60539 is applicable to directly heated negative temperature coefficient thermistors, typically made from transition metal oxide materials with semiconducting properties. It establishes standard terms, inspection procedures and methods of test for use in sectional and detail specifications of electronic components for quality assessment or any other purpose.

Directly heated negative temperature coefficient thermistors - Part 1: Generic specification

LST EN 60738-1-2006 热敏电阻 直接加热正温度系数 第1部分：通用规范（IEC 60738-1:2006）

Thermistors - Directly heated positive temperature coefficient - Part 1: Generic specification (IEC 60738-1:2006)

DS/EN 60738-1:2006 热敏电阻 直接加热正温度系数 第1部分：通用规范

This International Standard prescribes terms and methods of test for positive step-functiontemperature coefficient thermistors, insulated and non-insulated types, typically made fromferro-electric semi-conductor materials.

Thermistors - Directly heated positive temperature coefficient - Part 1: Generic specification

BS EN 60738-1:2006 热敏电阻器 直热式正温度系数 总规范

This part of IEC 60738 describes terms and methods of test for positive step-function temperature coefficient thermistors, insulated and non-insulated types typically made from ferro-electric semi-conductor materials. It establishes standard terms, inspection procedures and methods of test for use in detail specifications for Qualification Approval and for Quality Assessment Systems for electronic components.

Thermistors - Directly heated positive temperature coefficient - Part 1: Generic specification

BS EN 60738-1:2006+A1:2009 热敏电阻器.直热式正温度系数.总规范

This part of IEC 60738 describes terms and methods of test for positive step-function temperature coefficient thermistors, insulated and non-insulated types typically made from ferro-electric semi-conductor materials. It establishes standard terms, inspection procedures and methods of test for use in detail specifications for Qualification Approval and for Quality Assessment Systems for electronic components.

Thermistors - Directly heated positive temperature coefficient - Generic specification

BS EN 62319-1:2006 聚合热敏电阻 直接加热的阳极阶跃函数温度系数 第1部分：总规范

Polymeric thermistors - Directly heated positive step function temperature coefficient - Generic specification

BS EN 62319-1:2005 聚合热敏电阻.直接加热的阳极阶跃函数温度系数.第1部分:总规范

This part of IEC 62319 prescribes terms and methods of test for polymeric positive temperature coefficient thermistors, insulated and non-insulated types, typically intended for use in current limiting and overcurrent protection applications. It establishes standard terms, inspection procedures and methods of test for use in detail specifications for Qualification Approval and for Quality Assessment Systems for electronic components.

Polymeric thermistors - Directly heated positive step function temperature coefficient - Part 1: Generic specification

BS EN 62319-1-1:2005 聚合热敏电阻器.直接加热的阳极阶跃函数温度系数.第1-1部分:空白详细规范.限流的应用

1.1 Method(s) of mounting (to be inserted) See 4.9 of IEC 62319-1. 1.2 Dimensions All dimensions are in millimetres or inches and millimetres; it shall be stated which dimensions are suitable for gauging. Dimensional drawing(s) shall be given in the detail specification. If necessary, the dimensions may be listed in tabular form with reference to styles or codes.

Polymeric thermistors - Directly heated positive step function temperature coefficient - Part 1-1: Blank detail specification - Current limiting application

BS EN 62319-1-1:2006 聚合热敏电阻器 直接加热的阳极阶跃函数温度系数 第1-1部分：空白详细规范 限流的应用

Polymeric thermistors. Directly heated positive step function temperature coefficient. Blank detail specification. Current limiting application

EN 60738-1:2006 热敏电阻 直接加热正温度系数 第1部分：通用规范

IEC 60738-1:2006 describes terms and methods of test for positive step-function temperature coefficient thermistors, insulated and non-insulated types typically made from ferro-electric semi-conductor materials. It establishes standard terms, inspection procedures and methods of test for use in detail specifications for Qualification Approval and for Quality Assessment Systems for electronic components. This third edition cancels and replaces the second edition published in 1998 and constitutes a minor revision. The changes with respect to the previous edition refer to the tables, figures and references.

Thermistors - Directly heated positive temperature coefficient - Part 1: Generic specification

IEC 60738-1:2006 热敏电阻器.直热式正温度系数.第1部分:总规范

This part of IEC 60738 describes terms and methods of test for positive step-function temperature coefficient thermistors, insulated and non-insulated types typically made from ferro-electric semi-conductor materials. It establishes standard terms, inspection procedures and methods of test for use in detail specifications for Qualification Approval and for Quality Assessment Systems for electronic components.

Thermistors - Directly heated positive temperature coefficient - Part 1: Generic specification

NF C93-272-1:2006 直热式负温度系数热敏电阻.第1部分:一般规范

Directly heated negative temperature coefficient thermistors - Part 1 : Generic specification.

JIS C 2570-1:2006 直热式负温度系数热敏电阻.第1部分:一般规范

この規格は，半導体特性をもつ遷移金属酸化物によって作られる直熱形NTCサーミスタの形式別通則及び個別規格で使用する用語及び試験方法について規定する。備考 この規格の対応国際規格を，次に示す。なお，対応の程度を表す記号は，ISO/IEC Guide 21に基づき， IDT(一致している)，MOD（修正している），NEQ(同等でない)とする。

Directly heated negative temperature coefficient thermistors -- Part 1: Generic specification

DLA MIL-PRF-23648 F SUPP 1A-2006 绝缘热敏电阻 常规

This supplement forms a part of MIL-PRF-23648F, dated 3 February 2005.

RESISTORS, THERMAL (THERMISTOR), INSULATED, GENERAL SPECIFICATION FOR

DLA MIL-PRF-23648 F (1)-2006 绝缘热敏电阻 常规

This specification covers the general requirements for general purpose insulated thermal resistors to be used for temperature compensation, control, and measurement over the temperature range specified.

RESISTORS, THERMAL (THERMISTOR), INSULATED, GENERAL SPECIFICATION FOR

DIN EN 62319-1-1:2005 聚合热敏电阻.直接加热的阳极阶跃函数温度系数.第1-1部分:空白详细规范.限流应用

Polymeric thermistors - Directly heated positive step function temperature coefficient - Part 1-1: Blank detail specification - Current limiting application (IEC 62319-1-1:2005); German version EN 62319-1-1:2005