31.060.70 电力电容器 标准查询与下载

IEC TS 60871-3:2015 额定电压1000V以上交流电力系统用并联电容器 第3部分:并联电容器和并联电容器组的保护

This part of IEC 60871, which is a technical specification, gives guidance on the protection of shunt capacitors and shunt capacitor banks. it applies to capacitors according to IEC 60871- 1.

Shunt capacitors for AC power systems having a rated voltage above 1000 V - Part 3: Protection of shunt capacitors and shunt capacitor banks

DL/T 1415-2015 高压并联电容器装置保护导则

本标准规定了高压并联电容器装置(以下简称电容器装置)保护的术语和定义、电容器分类及元件连接方式、电容器装置的继电保护、电容器组不平衡保护、延时电流速断保护和过电流保护、过电压保护和低电压保护以及其他保护。 本标准适用于电力系统中35kV及以上电压等级变电站内6kV~110kV高压并联电容器装置的不平衡保护。 本标准不包含电容器装置的暂态过电压保护和单台电容器用熔断器保护。

Guide for the protection of high voltage shunt capacitor installations

DIN EN 60871-1:2015 额定电压1kV以上交流电力系统的并联电容器.第1部分:总则(IEC 60871-1-2014);德文版本EN 60871-1-2014

Shunt capacitors for a.c. power systems having a rated voltage above 1 000 V - Part 1: General (IEC 60871-1:2014); German version EN 60871-1:2014

GOST R 56744-2015 电力电容器. 低压功率因数补偿装置

Power capacitors. Low-voltage power factor corrector banks

GSO IEC 60252-2:2014 交流电机电容器 第2部分：电机启动电容器

This part of IEC 60252 applies to motor start capacitors intended for connection to windings of .asynchronous motors supplied from a single-phase system having the frequency of the mains This standard covers impregnated or unimpregnated metallized motor start capacitors having a dielectric of paper or plastic film, or a combination of both and electrolytic motor start .capacitors with non-solid electrolyte, with rated voltages up to and including 660 V

AC motor capacitors - Part 2: Motor start capacitors

GSO IEC 61071:2014 电力电子电容器

This International Standard applies to capacitors for power electronics applications. The operating frequency of the systems in which these capacitors are used is usually up to 15kHz, while the pulse frequencies may be up to 5 to 10 times the operating frequency. The standard distinguishes between a.c. and d.c. capacitors which are considered as components when mounted in enclosures. This standard covers an extremely wide range of capacitor technologies for numerous applications, e.g. overvoltage protection, d.c. and a.c. filtering, switching circuits, d.c. energy storage, auxiliary inverters, etc. The following are excluded from this standard: – capacitors for induction heat-generating plants operating at frequencies between 40 Hz and 24 000 Hz (see IEC 60110-1 and IEC 60110-2); – capacitors for motor applications and the like (see IEC 60252-1 and IEC 60252 -2); – capacitors to be used in circuits for blocking one or more harmonics in power supply networks; – small a.c. capacitors as used for fluorescent and discharge lamps (see IEC 61048 and IEC 61049); – capacitors for suppression of radio interference (see IEC 60384-14); – shunt capacitors for a.c. power systems having a rated voltage above 1 000 V (see IEC 60871-1 and IEC 60871-2); – shunt power capacitors of the self-healing type for a.c. systems having a rated voltage up to and including 1 000 V (see IEC 60831-1 and IEC 60831-2); – shunt power capacitor of the non-self-healing type for a.c. systems having a rated voltage up to and including 1 000 V (see IEC 60931-1 and IEC 60931-2); – electronic capacitors not used in power circuits; – series capacitors for power systems (see IEC 60143); – coupling capacitors and capacitors dividers (see IEC 60358); – capacitors for microwave ovens (see IEC 61270-1); – capacitors for railway applications (see IEC 61881). Examples of applications are given in Clause 9.1.

Capacitors for power electronics

GSO IEC 61921:2014 电力电容器 低压功率因数校正组合

This International Standard is applicable to low-voltage a.c. capacitor banks intended to be used for power factor correction purposes, equipped with a built-in switchgear and controlgear apparatus capable of connecting to or disconnecting from the mains part(s) of the bank with the aim to correct its power factor. Low-voltage power factor correction banks if not otherwise indicated hereinafter and where applicable shall comply with the requirements of IEC 60439-1 and those of IEC 60439-3.

Power capacitors - Low-voltage power factor correction banks

GSO IEC 61270-1:2014 微波炉电容器 第1部分：概述

This part of IEC 1270 applies to capacitors for microwave ovens operating at rated a.c. voltages of up to 3 000 V and a superimposed d.c. voltage of up to 0,8• 1,E times the value of rated a.c. voltage. This standard relates specifically to capacitors with a metal case and an upper rated maximum temperature of up to 100 °C, non-self-healing, with metal foil electrodes and dielectrics of paper and/or plastic, impregnated with a suitable oil.

Capacitors for microwave ovens - Part 1: General

DB44/T 1498-2014 电气设备用双层固定电容器（超级电容器） 第1部分：通用规范

本标准规定了电气设备用双层固定电容器(超级电容器)的技术信息、质量评定程序、试验和测量程序。 本标准适用于双层固定电容器(超级电容器)，主要用于电气电子设备的直流电路。本标准建立的标准条款，检验程序和测试方法，适用于电气电子元件的质量评估或其它目的。

Double-layer fixed capacitors (supercapacitors) for electrical equipment - Part 1: General specifications

DIN EN 60831-2:2014 额定电压不超过1000 V交流设备用自恢复型旁路电容器.第2部分:老化试验、自恢复试验和破坏试验(IEC 60831-2-2014).德文版本EN 60831-2-2014

Shunt power capacitors of the self-healing type for a.c. systems having a rated voltage up to and including 1000 V - Part 2: Ageing test, self-healing test and destruction test (IEC 60831-2:2014); German version EN 60831-2:2014

DIN EN 60831-1:2014 额定电压不超过1000 V交流系统用自愈式并联电力电容器.第1部分:总则.性能、试验和额定值.安全性要求.安装和使用指南(IEC 60831-1-2014+Cor.-2014).德文版本EN 60831-1-2014

Shunt power capacitors of the self-healing type for a.c. systems having a rated voltage up to and including 1000 V - Part 1: General - Performance, testing and rating - Safety requirements - Guide for installation and operation (IEC 60831-1:2014 + Cor.:20

IEC TS 60871-2:2014 额定电压1000V以上交流电力系统用并联电容器 第2部分:耐久性试验

Shunt capacitors for AC power systems having a rated voltage above 1000 V - Part 2: Endurance testing

DIN EN 62146-1:2014 高压交流断路器用均压电容器. 第1部分: 总则 (IEC 62146-1-2013); 德文版本EN 62146-1-2014

Grading capacitors for high-voltage alternating current circuit-breakers - Part 1: General (IEC 62146-1:2013); German version EN 62146-1:2014

KS C IEC 61071:2014 电力电子用电容器

이 표준은 전력 전자장비용 커패시터에 적용한다.이 커패시터가 사용되는 시스템의 동작 주파수는 통상 15 kHz 이하이며, 펄스 주파수는 동작 주파수의 5배에서 10배에 이를 수 있다.표준은 밀폐함에 탑재할 때 부품으로 간주되는 교류 및 직류 전동기를 구분한다.이 표준은 과전압 보호나 직류 및 교류 필터링, 개폐 회로, 직류 에너지 저장, 보조 인버터 등과 같이 다양한 애플리케이션에 사용되는 광범위한 커패시터 기술을 다루고 있다.다음 사항은 이 표준에서 제외한다.― 주파수 40 Hz부터 24 000 Hz에서 동작하는 유도 열생성 플랜트의 커패시터(KS C IEC 60110-1과 IEC 60110-2 참조)― 전동기 애플리케이션용 커패시터(KS C IEC 60252-1과 IEC 60252-2 참조)― 전력공급망 고조파를 1개 이상 차단하기 위해 회로에 사용되는 커패시터― 형광등과 방전등에 사용되는 소형 교류 커패시터(KS C IEC 61048과 IEC 61049 참조)― 무선 장해 억제용 커패시터(KS C IEC 60384-14 참조)― 정격 전압이 1 000 V 이상인 교류 전력 시스템용 분로 커패시터(IEC 60871-1과 IEC 60871-2 참조)― 정격

Capacitors for power electronics

KS C IEC 61921-2014(2019) 电力电容器 - 低压功率因数校正组

Power capacitors — Low-voltage power factor correction banks

KS C IEC 61921:2014 电力电容器 低压功率因数校正组

이 표준은 역률 조정을 위해 뱅크의 메인 파트와 연결 또는 분리될 수 있는 내장된 개폐 장치와 제어 장치를 장착하고 역률 정정에 사용되기 위한 저전압 교류 콘덴서 뱅크에 적용한다.이 표준에서 별도의 표시가 없는 한, 저전압 역률 보정 뱅크는 KS C IEC 60439-1과 KS C IEC 60439-3의 요건을 준수해야 한다.?

Power capacitors — Low-voltage power factor correction banks

KS C IEC 61071-2014(2019) 电力电子用电容器

Capacitors for power electronics

T/TIAA 001-2014 电动汽车驱动电机系统用金属化薄膜电容器规范

本标准所涉及的电容器的额定电压最高到1kV； 电容器作为部件安装在电机驱动控制器壳体中。

Specification of metalized film capacitors for electric vehicle motor driving system

T/TIAA 002-2014 电动汽车电机控制器用高压电容器选型规范

电容器额定电压值应不小于额定电源电压的1.2倍，同时不小于电源电压的最大值；电容器的标称电容量的选择应满足使控制器电路中纹波电压不大于电源电压的5%；电容器的额定纹波电流应保证电容器在其额定电压及其频率范围且在85 ℃的环境下，长期可靠工作。

Supporting high-voltage bus capacitors selective specifications for

T/TIAA 003-2014 电动汽车电机控制器电源线通用规范

（1）绝缘电阻：导电线芯间、导电线芯与外壳体件间、导电芯件与电缆屏蔽层间的绝缘电阻应大于100MΩ或符合相关详细规范的规定； （2）耐电压：在导电线芯间、导电线芯与外导体之间应施加1000+2×U，50Hz或1000+3.2×U的直流电压，持续1 min应无击穿现象，漏电流不大于5mA； （3）荷载能力：电源线应能承受表2规定的试验电流，达到热平衡后，电源线连接器或端子与电线的压接区的温升应不大于40℃； （4）耐弯曲：电源线承受1500次耐弯曲试验后，应无损伤现象。

General Specification for Power Cable Assemblies for Motor Vehicle Controllers Used in Electric Automobiles