31.060.70 电力电容器 标准查询与下载

JBT13697-2019 电力电容器用插片式金属防爆盖板组件

Insert-type metal explosion-proof cover assembly for power capacitors

JBT13698-2019 电力电容器用圆形及椭圆形铝外壳

Round and oval aluminum casings for power capacitors

T/ZZB 0764-2018 感应加热装置用电力电容器 (电热电容器)

本标准规定了感应加热装置用电力电容器(简称：电热电容器)的术语和定义、使用条件、基本要求、技术要求、检验方法、检验规则、标志、包装和质量承诺。 本标准适用于标称电压不大于5.0 kV， 频率为 50 Hz以上 20 kHz以下的可控或可调的交流电压系统中，专门用来改善感应加热、熔化、搅拌或铸造装置的电源质量。 本标准所述的均为全膜介质电容器。 本标准不适用于以下电容器： a)　电力系统用串联电容器； b)　电动机用电容器及其类似者； c)　耦合电容器及电容分压器； d)　标称电压1 kV及以下交流电力系统用自愈式并联电容器； e)　标称电压1 kV以上交流电力系统用并联电容器； f)　标称电压1 kV及以下交流电力系统用非自愈式并联电容器； g)　荧光灯和放电灯用小型交流电容器； h)　电力电子电路用电容器； i)　微波炉用电容器； j)　抑制无线电干扰用电容器； k)　拟在叠加有直流电压的交流电压下使用的电容器。

Power capacitors for induction heating installations(Capacitor for electric induction heating system)

T/ZZB 0212-2017 环保型低压功率因数调整用金属化膜电力电容器

本标准规定了环保型低压功率因数调整用金属化膜电力电容器的术语和定义、基本要求、试验要求和方法、过负荷、安全要求、单元的标志、电容器组的标志、试验分类和质量承诺。 本标准适用于专门用来调整标称电压为1000 V及以下、频率为15 Hz～60 Hz交流电力系统的功率因数的自愈式电容器单元和电容器组。 本标准不适用于下列电容器： ——标称电压1000 V及以下交流电力系统用非自愈式并联电容器； ——标称电压1000 V以上交流电力系统用并联电容器； ——在频率50 kHz以下运行的感应加热装置用电容器

Environmental friendly low voltage metallized film capacitors for adjusting power factor

IEC 61071:2017 电力电子用电容器

This International Standard applies to capacitors for power electronics applications. The operating frequency of the systems in which these capacitors are used is usually up to 15 kHz@ while the pulse frequencies may be up to 5 to 10 times the operating frequency. The document distinguishes between AC and DC capacitors which are considered as components when mounted in enclosures. This document covers an extremely wide range of capacitor technologies for numerous applications@ e.g. overvoltage protection@ DC and filtering@ switching circuits@ energy storage@ auxiliary inverters@ etc. The following are excluded from this document:

Capacitors for power electronics

IEC 61071:2017 RLV 电力电子用电容器

Capacitors for power electronics

IEC 61921:2017 RLV 电力电容器.低压功率因数校正组

Power capacitors - Low-voltage power factor correction banks

IEC 61921:2017 电力电容器.低压电力因数校正装置组

This International Standard is applicable to low-voltage AC shunt capacitor banks intended to be used for power factor correction purposes, possibly equipped with a built-in switchgear and controlgear apparatus capable of connecting to or disconnecting from the mains part(s) of the bank with the aim to correct its power factor. Low-voltage power factor correction banks if not otherwise indicated hereinafter and where applicable comply with the requirements of IEC 61439-1 and IEC 61439-2.

Power capacitors - Low-voltage power factor correction banks

DIN EN 62146-1:2017 高压交流断路器用均压电容器.第1部分:总则(IEC 62146-1-2013+A1-2016);德文版本EN 62146-1-2014+A1-2016

Grading capacitors for high-voltage alternating current circuit-breakers - Part 1: General (IEC 62146-1:2013 + A1:2016); German version EN 62146-1:2014 + A1:2016

IEC 60143-1:2015/COR1:2017 电力系统用串联电容器. 第1部分: 总则; 勘误表1

Series capacitors for power systems - Part 1: General; Corrigendum 1

IEC 62146-1:2013+AMD1:2016 CSV 高压交流电用分级电容器 断路器 第1部分 总则

Grading capacitors for high-voltage alternating current circuit-breakers - Part 1: General

IEC 62146-1:2013/AMD1:2016 修改件1.高压交流断路器用分级电容器.第1部分:总则

Amendment 1 - Grading capacitors for high-voltage alternating current circuit-breakers - Part 1: General

DIN EN 60143-3:2016 电力系统的串联电容器.第3部分:内部熔断器(IEC 60143-3-2015).德文版本EN 60143-3-2015

Series capacitors for power systems - Part 3: Internal fuses (IEC 60143-3:2015); German version EN 60143-3:2015

DIN EN 60143-1:2016 电力系统用串联电容器.第1部分:总则(IEC 60143-1-2015);德文版本EN 60143-1-2015

Series capacitors for power systems - Part 1: General (IEC 60143-1:2015); German version EN 60143-1:2015

BS EN 60143-1:2015 电力系统用串联电容器.总则

Series capacitors for power systems. General

EN 60143-1:2015 电力系统用串联电容器 第1部分：总则

Series capacitors for power systems - Part 1: General

DIN IEC/TS 60871-2:2015 额定电压1000V以上交流电力设备并联电容器.第2部分:耐久性试验(IEC/TS 60871-2-2014)

Shunt capacitors for AC power systems having a rated voltage above 1 000 V - Part 2: Endurance testing (IEC/TS 60871-2:2014)

EN 60143-3:2015 电力系统用串联电容器 第3部分：内部熔断器

IEC 60143-3:2015 applies to internal fuses designed to isolate faulty capacitor elements, to allow operation of the remaining parts of that capacitor unit and the bank in which the capacitor unit is connected. Such fuses are not a substitute for a switching device such as a circuit-breaker, or for external protection of the capacitor bank, or any part thereof. The object of this part of IEC 60143 is: - to formulate requirements regarding performance and testing; - to provide a guide for coordination of fuse and bank protection. This second edition cancels and replaces the first edition published in 1998. This edition constitutes a technical revision. This edition includes the following significant technical changes with respect to the previous edition: The test procedure has been largely simplified. Keywords: faulty capacitor elements, fuse and bank protection

Series capacitors for power systems - Part 3: Internal fuses

IEC TS 60871-3:2015 额定电压1000V以上交流电力系统用并联电容器 第3部分:并联电容器和并联电容器组的保护

This part of IEC 60871, which is a technical specification, gives guidance on the protection of shunt capacitors and shunt capacitor banks. it applies to capacitors according to IEC 60871- 1.

Shunt capacitors for AC power systems having a rated voltage above 1000 V - Part 3: Protection of shunt capacitors and shunt capacitor banks

IEC 60143-1:2015 电力系统用串联电容器.第1部分:总则

This part of IEC 60143 applies both to capacitor units and capacitor banks intended to be used connected in series with an a.c. transmission or distribution line or circuit forming part of an a.c. power system having a frequency of 15 Hz to 60 Hz. The primary focus of this standard is on transmission application. The series capacitor units and banks are usually intended for high-voltage power systems. This standard is applicable to the complete voltage range. This standard does not apply to capacitors of the self-healing metallized dielectric type. The following capacitors, even if connected in series with a circuit, are excluded from this standard: capacitors for inductive heat-generating plants (IEC 60110-1); capacitors for motor applications and the like (IEC 60252 (all parts)); capacitors to be used in power electronics circuits (IEC 61071); capacitors for discharge lamps (IEC 61048 and IEC 61049). For standard types of accessories such as insulators, switches, instrument transformers, external fuses, etc. see the pertinent IEC standard. NOTE 1 Additional requirements for capacitors to be protected by internal fuses, as well as the requirements for internal fuses, are found in IEC 60143-3. See also Annex C. NOTE 2 Additional requirements for capacitors to be protected by external fuses, as well as the requirements for external fuses, are found in Annex A and Annex C. NOTE 3 A separate standard for series capacitor accessories (spark-gaps, varistors, discharge reactors, current- limiting damping reactors, damping resistors, circuit-breakers, etc.), IEC 60143-2, has been revised and was completed in 2012. A separate standard for internal fuses for series capacitors, IEC 60143-3 has been revised and was completed in 2013. NOTE 4 Some information regarding fuseless capacitor units and fuseless capacitor banks is found in Annex C. The object of this standard is; to formulate uniform rules regarding performance, testing and rating; to formulate specific safety rules; to serve as a guide for installation and operation.

Series capacitors for power systems - Part 1: General