31.060.70 电力电容器 标准查询与下载

GOST IEC 61921-2013 电力电容器. 低压功率因数补偿装置

Power capacitors. Low-voltage power factor correction banks

GOST IEC 60110-1-2013 感应加热装置的电力电容器. 第1部分. 总则

Power capacitors for induction heating installations. Part 1. General

GOST IEC 60931-1-2013 "环境试验中额定电压小于等于1000 V的交流系统用非自愈式并联电力电容器. 第1部分. 概述. 性能, 试验和定额. 安全要求. 安装和操作指南"

Shunt power capacitors of the non-self-healing type for a.c. systems, having rated voltage up to and including 1 000 V Environmental testing. Part 1. General. Performance, testing and rating. Safety requirements. Guide for installation and operation

GOST IEC 60931-2-2013 额定电压小于等于1000 V的交流系统用非自愈式并联电力电容器. 第2部分. 老化试验和破坏试验

Shunt power capacitors of the non-self-healing type for a.c. systems having a rated voltage up to and including 1000 V. Part 2. Ageing test and destruction test

NB/T 41003-2011 标称电压1000V及以下交流电力系统用自愈式并联电容器产品质量分等

Product quality classification of self-healing shunt capacitors for AC power systems with nominal voltage 1000V and below

DIN EN 60831-2:2012 额定电压不超过1000 V交流设备用自恢复型旁路电容器.第2部分:老化试验、自恢复试验和破坏试验(IEC 33/495/CDV-2012).德文版本FprEN 60831-2:2012

Shunt power capacitors of the self-healing type for A.C. systems having a rated voltage up to and including 1000 V - Part 2: Ageing test, self-healing test and destruction test (IEC 33/495/CDV:2012); German version FprEN 60831-2:2012

DIN EN 60831-1:2012 额定电压不超过1000 V交流系统用自愈式并联电力电容器.第1部分:总则.性能、试验和额定值.安全性要求.安装和使用指南(IEC 33/496/CDV-2012).德文版本FprEN 60831-1-2012

Shunt power capacitors of the self-healing type for A.C. systems having a rated voltage up to and including 1000 V - Part 1: General - Performance, testing and rating - Safety requirements - Guide for installation and operation (IEC 33/496/CDV:2012); Germ

NB/T 41001-2011 电容式电压互感器产品质量分等

Capacitive voltage transformer product quality classification

IEC 33/505/CD:2012 IEC/TS 60871-2，编 3：额定电压高于 1000 V 的交流电源系统用并联电容器 第2部分：耐久性测试

IEC/TS 60871-2, Ed. 3: Shunt capacitors for AC power systems having a rated voltage above 1000 V - Part 2: Endurance testing

IEEE 18-2012 并联电力电容器用电气电子工程师学会(IEEE)标准

IEEE Standard for Shunt Power Capacitors

JB/T 7115-2011 低压电动机就地无功补偿装置

本标准规定了低压电动机就地无功补偿装置的术语和定义、使用条件、设计、结构及安全要求、质量要求和试验、标志、运输及安装运行导则等。 本标准适用于频率为50 Hz或60 Hz、标称电压为1 kV及以下的交流配电系统，与电动机并联使用，用以补偿电动机所产生的感性无功，提高功率因数的就地无功补偿装置（以下简称“装置”）。

Local reactive power compensation installations for a low-voltage motor

JB/T 1811-2011 压缩气体标准电容器

本标准规定了压缩气体标准电容器的适用范围、术语和定义、使用条件、质量要求和试验、标志、包装和运输等。 本标准适用于内部以压缩气体为电介质的、主要用于50 Hz（或60 Hz）高压测量电路中的标准电容器（以下简称电容器）。

Compressed gas standard capacitors

DIN EN 60252-2:2011 交流电动机电容器.第2部分:电动机启动电容器(IEC 60252-2-2010);德文版本EN 60252-2-2011

AC motor capacitors - Part 2: Motor start capacitors (IEC 60252-2:2010); German version EN 60252-2:2011

DIN EN 60252-1:2011 AC电动机电容.第1部分:总则.性能,测试和等级评定.安全要求.安装和操作指南(IEC 60252-1-2010);德文版本EN 60252-1-2011

AC motor capacitors - Part 1: General - Performance, testing and rating - Safety requirements - Guidance for installation and operation (IEC 60252-1:2010); German version EN 60252-1:2011

DIN EN 60143-4:2011 电力系统用串联电容器.第4部分:晶闸管控制串联电容器(IEC 60143-4-2010);德文版本EN 60143-4-2010

Series capacitors for power systems - Part 4: Thyristor controlled series capacitors (IEC 60143-4:2010); German version EN 60143-4:2010

BS EN 60252-2:2011+A1:2013 交流电动机电容器.电动机起动电容器

AC motor capacitors. Motor start capacitors

BS EN 60252-1:2011+A1:2013 交流电动机电容器.总则.性能,试验和评定.安全性要求.安装和运转导则

AC motor capacitors. General. Performance, testing and rating. Safety requirements. Guidance for installation and operation

BS EN 60143-4:2011 动力系统串联电容器 晶闸管控制的串联电容器

Series capacitors for power systems. Thyristors controlled series capacitors

DS/EN 60252-1:2011 交流电机电容器 第1部分：总则 性能、测试和额定值 安全要求 安装和操作指南

IEC 60252-1:2010 applies to motor capacitors intended for connection to windings of asynchronous motors supplied from a single-phase system having a frequency up to and including 100 Hz, and to capacitors to be connected to three-phase asynchronous motors so that these motors may be supplied from a single-phase system. This standard covers impregnated or unimpregnated capacitors having a dielectric of paper, plastic film, or a combination of both, either metallized or with metal-foil electrodes, with rated voltages up to and including 660 V. This edition includes the following significant technical changes with respect to the previous edition: - the definit

AC motor capacitors - Part 1: General - Performance, testing and rating - Safety requirements - Guidance for installation and operation

DS/EN 60252-2:2011 交流电机电容器 第2部分：电机启动电容器

IEC 60252-2:2010 applies to motor start capacitors intended for connection to windings of asynchronous motors supplied from a single-phase system having the frequency of the mains. Covers impregnated or unimpregnated metallized motor start capacitors having a dielectric of paper or plastic film, or a combination of both and electrolytic motor start capacitors with non-solid electrolyte, with rated voltages up to and including 660 V. The main changes with respect to the previous edition are: - definition of segmented film capacitors; - clearer definition of the purpose of d.c. conditioning in destruction test.

AC motor capacitors - Part 2: Motor start capacitors