31.240 电子设备用机械构件 标准查询与下载
共找到 702 条与 电子设备用机械构件 相关的标准，共 47 页
This part of IEC 61587 specifies seismic tests for cabinets and racks accommodated with IEC 60917 and 60297 series. It applies@ in whole or in part@ only to the mechanical structures of cabinets and racks for electronic equipment according to the above cited series of standards@ while it does not apply to the electronic equipment or systems deemed to be installed within these mechanical structures. This standard does not apply either to a cabinet or a rack having an anti-seismic isolation structure@ either external or internal. This standard aims to provide test conditions and criteria that constitute a reference to evaluate the ability of the mechanical structure of the cabinets or racks to acceptably withstand specified seismic intensities. For this purpose@ this standard specifies test specimen conditions@ such as dimensions (i.e. height@ width and depth) of the cabinet and the rack@ load distribution@ structural test condition and the RRS (required response spectra) of singleaxis or tri-axis acceleration as the seismic test wave condition. The single-axis or tri-axis acceleration is selectable.
IEC 61587-2, Ed. 2.0: Mechanical structures for electronic equipment - Tests for IEC 60917 and 60297 - Part 2: Seismic tests for cabinets and racks
- ICS
- 31.240
- CCS
- L94
- 发布
- 2011-08
- 实施
- 2011-08-27
Mechanical structures for electronic equipment - Thermal management for cabinets in accordance with IEC 60297 and IEC 60917 series - Part 2: Design guide: Method for determination of forced air-coolin
- ICS
- 31.240
- CCS
- L94
- 发布
- 2011-07-26
- 实施
Piezoelectric filters of assessed quality. Standard outlines and lead connections
- ICS
- 31.240
- CCS
- L18
- 发布
- 2011-02-28
- 实施
- 2011-02-28
Tests for enclosures for JIS C 6010 (all parts) and IEC 60297 (all parts) -- Part 1: Climatic, mechanical tests and safety aspects for cabinets, racks, subracks and chassis
- ICS
- 31.240
- CCS
- L94
- 发布
- 2011-01-20
- 实施
Tests for enclosures for JIS C 6010 (all parts) and IEC 60297 (all parts) -- Part 3: Electromagnetic shielding performance tests for cabinets, racks and subracks
- ICS
- 31.240
- CCS
- L94
- 发布
- 2011-01-20
- 实施
Tests for enclosures for JIS C 6010 (all parts) and IEC 60297 (all parts) -- Part 2: Seismic tests for cabinets and racks
- ICS
- 31.240
- CCS
- L94
- 发布
- 2011-01-20
- 实施
Modular order for the development of mechanical structures for electronic equipment practices - Part 2-4: Sectional specification - Interface coordination dimensions for the 25 mm equipment practice - Adaptation dimensions for subracks or chassis applicab
- ICS
- 31.240
- CCS
- L94
- 发布
- 2011-01
- 实施
- 2011-01-01
Mechanical structures for electronic equipment - Dimensions of mechanical structures of the 482,6 mm (19 in) series - Part 3-106: Adaptation dimensions for subracks and chassis applicable with metric cabinets or racks in accordance with IEC 60917-2-1 (IEC
- ICS
- 31.240
- CCS
- L94
- 发布
- 2011-01
- 实施
- 2011-01-01
Modular order for the development of mechanical structures for electronic equipment practices. Part 1. Generic standard
- ICS
- 31.240
- CCS
- 发布
- 2011
- 实施
- 2012-07-01
Modular order for the development of mechanical structures for electronic equipment practices. Part 2. Sectional specification. Interface coordination dimensions for the 25 mm equipment practice. Section 1. Detail specification. Dimensions for cabinets an
- ICS
- 31.240
- CCS
- 发布
- 2011
- 实施
- 2012-07-01
IEC 60297-3-106:2010 Specifies dimensions for mounting flanges of 19 in subracks or chassis that are to be mounted into metric cabinets or racks. Additional dimensions for subracks or chassis are according to the IEC 60297 series, and for metric cabinets or racks to the IEC 60917 series. EMC, seismic, climatic and environmental requirements and tests, are defined in the IEC 61587 series.
Mechanical structures for electronic equipment - Dimensions of mechanical structures of the 482,6 mm (19 in) series - Part 3-106: Adaptation dimensions for subracks and chassis applicable with metric cabinets or racks in accordance with IEC 60917-2-1
- ICS
- 31.240
- CCS
- 发布
- 2010-11-12
- 实施
- 2010-11-12
IEC 60917-2-4:2010 specifies dimensions for mounting flanges of metric subracks or chassis that are to be mounted into 19 in cabinets or racks. Additional dimensions for subracks or chassis are according to the IEC 60917 series, and for 19 in cabinets or racks to the IEC 60297 series. EMC, seismic climatic and environmental requirements and tests, are defined in the IEC 61587 series.
Modular order for the development of mechanical structures for electronic equipment practices - Part 2-4: Sectional specification - Interface coordination dimensions for the 25 mm equipment practice - Adaptation dimensions for subracks or chassis applicab
- ICS
- 31.240
- CCS
- 发布
- 2010-11-12
- 实施
- 2010-11-12
IEC 60286-2:2008 applies to the packaging of components with two or more unidirectional leads for use in electronic equipment. In general, the tape is applied to the component leads. This standard covers requirements for taping techniques used with equipment for automatic handling, preforming of leads, insertion and other operations and includes only those dimensions which are essential to the taping of components intended for the above-mentioned purposes. This third edition cancels and replaces the second edition published in 1997 and its amendment 1 (2002) and constitutes a minor revision related to tables, figures and references.
Packaging of components for automatic handling - Part 2: Packing of components with unidirectional leads on continuous tapes
- ICS
- 31.240
- CCS
- 发布
- 2010-10-31
- 实施
Mechanical standardization of semiconductor devices - Part 6-19: Measurement methods of the package warpage at elevated temperature and the maximum permissible warpage (IEC 60191-6-19:2010); German version EN 60191-6-19:2010
- ICS
- 31.240
- CCS
- L40
- 发布
- 2010-10
- 实施
- 2010-10-01
Modular order for the development of mechanical structures for electronic equipment practices - Part 2-4: Sectional specification - Interface coordination dimensions for the 25 mm equipment practice - Adaptation dimensions for subracks or chassis applicab
- ICS
- 31.240
- CCS
- 发布
- 2010-09-30
- 实施
- 2010-09-30
Mechanical structures for electronic equipment - Dimensions of mechanical structures of the 482,6 mm (19 in) series - Part 3-106: Adaptation dimensions for subracks and chassis applicable with metric cabinets or racks in accordance with IEC 60917-2-1(IEC
- ICS
- 31.240
- CCS
- 发布
- 2010-09-30
- 实施
- 2010-09-30
Mechanical structures for electronic equipment - Dimensions of mechanical structures of the 482,6 mm (19 in) series - Part 3-106 : adaptation dimensions for subracks and chassis applicable with metric cabinets or racks in accordance with IEC 60917-2-1.
- ICS
- 31.240
- CCS
- L94
- 发布
- 2010-07-01
- 实施
- 2010-07-23
Modular order for the development of mechanical structures for electronic equipment practices - Part 2-4 : sectional specification - Interface coordination dimensions for the 25 mm equipment practice - Adaptation dimensions for subracks or chassis applica
- ICS
- 31.240
- CCS
- L94
- 发布
- 2010-07-01
- 实施
- 2010-07-23
This part of IEC 60297 specifies dimensions for mounting flanges of 19 in subracks or chassis that are to be mounted into metric cabinets or racks. Additional dimensions for subracks or chassis are according to the IEC 60297 series, and for metric cabinets or racks to the IEC 60917 series. EMC, seismic, climatic and environmental requirements and tests, are defined in the IEC 61587 series. The drawings used in this standard are not intended to indicate product design, only the specific dimensions that should be used. The terminology used complies with IEC 60917-1.
Mechanical structures for electronic equipment - Dimensions of mechanical structures of the 482,6 mm (19 in) series - Adaptation dimensions for subracks and chassis applicable with metric cabinets or racks in accordance with IEC 60917-2-1
- ICS
- 31.240
- CCS
- L94
- 发布
- 2010-05-31
- 实施
- 2010-05-31
This part of IEC 60917 specifies dimensions for mounting flanges of metric subracks or chassis that are to be mounted into 19 in cabinets or racks. Additional dimensions for subracks or chassis are according to the IEC 60917 series, and for 19 in cabinets or racks to the IEC 60297 series. EMC, seismic climatic and environmental requirements and tests, are defined in the IEC 61587 series. The drawings used in this standard are not intended to indicate product design, only the specific dimensions that shall be used. The terminology used complies with IEC 60917-1.
Modular order for the development of mechanical structures for electronic equipment practices - Sectional specification - Interface coordination dimensions for the 25 mm equipment practice - Adaptation dimensions for subracks or chassis applicable in cabi
- ICS
- 31.240
- CCS
- L94
- 发布
- 2010-05-31
- 实施
- 2010-05-31
