共找到 1396 条与 光电子学、激光设备 相关的标准,共 94 页
BS EN ISO 14880-4. Optics and photonics. Microlens arrays - Part 4. Test methods for geometrical properties
This document specifies procedures for the absorption measurement and high spatial-resolution two-dimensional or three-dimensional absorption mapping of optical laser components, and upon calibration, the measurement of absolute absorptance of laser optics. The methods given in this document are intended to be used for the two-dimensional or three- dimensional absorption mapping of optical laser components, that is, measurement of absorption as a function of position, as well as absorption/absorptance measurement and mapping of laser optics used in high-power/high-energy laser systems.
Optics and photonics — Laser and laser-related equipment — Photothermal technique for absorption measurement and mapping of optical laser components
Optics and photonics — Lasers and laser-related equipment — Measurement of phase retardation of optical components for polarized laser radiation
Electronic displays - Part 3-4: Evaluation of optical performances - High dynamic range displays
BS IEC 62341-6-7. Organic light emitting diode (OLED) displays - Part 6-7. Measuring methods of optical characteristics for under screen feature
Photobiological safety of lamps and lamp systems - Part 7: Light sources and luminaires primarily emitting visible radiation
本标准提供了安全使用波长在180 nm至1000μm之间的激光器和激光系统的建议。 This standard provides recommendations for the safe use of lasers and laser systems that operate at wavelengths between 180 nm and 1000 μm.
American National Standard for Safe Use of Lasers
Safety of laser products - Part 12: Safety of free space optical communication systems used for transmission of information
本文件规定了探测式多功能激光驱鸟器的型号、要求、试验方法、检验规则、标志、包装、运输和贮存。
Probe - type multifunctional laser bird catcher
本文件规定了AOI自动光学检测系统的要求、质量保证规定和交货准备。 本文件适用于电路基板(包括印刷电路板和陶瓷基板)检测用的AOI自动光学检测系统(以下简称系统)的设计、生产、检验和验收。
AOI automatic optical inspection system
前言 1 范围 2 规范性引用文件 3 术语和定义 4 产品分类 5 工作环境 6 要求 6.1 外观、尺寸和重量 6.2 主要性能 6.3 安全要求 6.4 噪声 7 试验方法 7.1 试验条件 7.2 外观检查及尺寸、重量测量 7.3 性能试验 7.4 安全检查 7.5 噪声试验 8 检验规则 8.1 检验分类 8.2 出厂检验 8.3 型式检验 8.4 判定规则 9 标志、包装、运输、贮存 9.1 标志 9.2 包装 9.3 运输 9.4 贮存
Digital maskless laser direct imaging lithography machine
3D display devices - Part 62-11: Measurement methods for virtual-image type - Optical
Laser display devices - Optical measuring methods of colour speckle
本文件规定了录音及后期制作的技术要求、设备、环境要求及步骤。 本文件适用于上海市羽昼文化传播有限公司录音及后期制作。
Technical specifications for recording and post production
本标准规定了鼻罩的命名、通用要求、要求、试验方法、试验步骤、检验规则、标志和随行文件以及包装、运输和贮存。 本文件适用于对呼吸舒适性有更高要求的特需群体在日常生活中佩戴的,用于过滤阻隔花粉、飞沫等颗粒物,可以达到0.3微米颗粒物的95%的过滤效率的鼻罩。
nasal mask
本文件规定了地铁投影设备控制技术系统的主要技术内容、技术指标以及主要产品、工艺等。 本文件适用于地铁投影设备控制技术系统
Subway Projection Equipment Control Technology System
本文件规定了PCB缺陷视觉检测系统的硬件组成及参数、软件架构及缺陷检测方法、技术要求、检验方法、出厂检验及包装和贮存。 本文件适用于PCB缺陷自动光学检测设备(Automatic Optical Inspection;AOI)的研制、生产和交付。
PCB defect vision inspection system
Organic light emitting diode (OLED) displays - Part 6-1: Measuring methods of optical and electro-optical parameters
Organic light emitting diode (OLED) displays - Part 6-1: Measuring methods of optical and electro-optical parameters
Photobiological safety of lamps and lamp systems - Part 6: Ultraviolet lamp products
Copyright ©2007-2022 ANTPEDIA, All Rights Reserved
京ICP备07018254号 京公网安备1101085018 电信与信息服务业务经营许可证:京ICP证110310号