33.160.10 放大器 标准查询与下载

KS C IEC 60268-8:2014 音响系统设备 第8部分：自动增益控制器件

Sound system equipment－Part 8：Automatic gain control dvices

GSO IEC/TR 61292-3:2014 光放大器 第3部分：分类、特性和应用

This part of IEC 61292 establishes a family tree for the classification of optical amplifiers, including those still being researched in laboratories, so that their similarities and differences can readily be identified. The report also includes a brief description of each amplifier family, highlighting their generic properties, performance and applications at the time of writing.

Optical amplifiers - Part 3: Classification, characteristics and applications

GSO IEC/TR 61292-1:2014 光纤 第1部分：放大器组件参数

This part of IEC 61292, which is a technical report, applies to optical components of rare-earth doped fibre amplifiers. It provides information about the most relevant parameters of optical components especially for erbium doped fibre amplifiers (EDFAs). The object of this technical report is to provide introductory information for a better understanding of EDFA operation and applications.

Optical amplifiers - Part 1: Parameters of amplifier components

GSO IEC/TR 61292-2:2014 光放大器技术报告 第2部分：使用电频谱分析仪评估噪声分布的理论背景

This Technical Report applies to all commercially available optical amplifiers (Oas) including optical fibre amplifiers (OFAs) using active fibres and semiconductor optical amplifiers (SOAs) using semiconductor gain media. The object of this Technical Report is to provide the theoretical background to Clause 6 (Calculation) of IEC 61290-3-2.

Optical amplifier technical reports - Part 2: Theoretical background for noise figure evaluation using the electrical spectrum analyzer

GSO IEC/TR 61292-4:2014 光放大器 第4部分：安全无害地使用光放大器（包括拉曼放大器）的最大允许光功率

This part of IEC 61292, which is a technical report, applies to all commercially available optical amplifiers (OAs), including optical fibre amplifiers (OFAs) using active fibres, as well as Raman amplifiers. Semiconductor optical amplifiers (SOAs) using semiconductor gain media are also included. This technical report provides a simple informative guideline on the threshold of high optical power that causes high-temperature damage of fibre. Also discussed is optical safety for manufacturers and users of optical amplifiers by reiterating substantial parts of existing standards and agreements on eye and skin safety. To identify the maximum permissible optical power in the optical amplifier from damage-free and safety viewpoints, this technical report identifies the following values: a) the optical power limit that causes thermal damage to the fibre, such as fibre fuse and fibre-coat burning; b) the maximum permissible exposure (MPE) to which the eyes/skin can be exposed without consequential injury; c) the optical power limit in the fibre that causes MPE on the eyes/skin after free-space propagation from the fibre; d) the absolute allowable damage-free and safe level of optical power of the optical amplifier by comparing (a) and (c). The objective of this technical report is to minimize potential confusion and misunderstanding in the industry that might cause unnecessary alarm and hinder the progress and acceptance of advancing optical amplifier technologies and markets. It is important to point out that the reader should always refer to the latest international standards and agreements because the technologies concerned are rapidly evolving. The present technical report will be frequently reviewed and will be updated by incorporating the results of various studies related to OAs and OA-supported optical systems in a timely manner.

Optical amplifiers - Part 4: Maximum permissible optical power for the damage-free and safe use of optical amplifiers, including Raman amplifiers

GSO IEC/TR 61292-5:2014 光放大器 第5部分：偏振模式色散系数 一般信息

This part of IEC 61292, which is a Technical Report, applies to all commercially available optical amplifiers (OAs) including those using fibres (OFAs), semiconductors (SOAs), and waveguides (POWA), as classified in IEC 61292-3. This Technical Report presents general information about polarization mode dispersion (PMD), related to the application of the two commonly used methods to test PMD in OAs, the Jones matrix eigenanalysis (JME) and the Poincaré sphere analysis (PSA), which have been demonstrated to be formalistically equivalent [4,5]2). This report is complementary to the International Standards describing the JME procedure (IEC 61290-11-1) and the PSA procedure (IEC 61290-11-2).

Optical amplifiers - Part 5: Polarization mode dispersion parameter - General information

GSO IEC 60268-3:2014 音频系统设备 第3部分：放大器

This part of IEC 60268 applies to analogue amplifiers, and the analogue parts of analogue/digital amplifiers, which form part of a sound system for professional or household applications. It specifies the characteristics which should be included in specifications of amplifiers and the corresponding methods of measurement. NOTE The methods of measurement for digital amplifiers and similar equipment are given in IEC 61606 [4] 1. In general, the specified methods of measurement are those which are seen to be most directly related to the characteristics. This does not exclude the use of other methods which give equivalent results. In general, the methods are based on the simplest measuring equipment which can provide useful results. This does not exclude the use of more complex equipment which can give higher accuracy and/or allow automatic measurement and recording of results. Rated conditions and standard measuring conditions are specified in order to allow measurements to be reliably repeated.

Sound system equipment - Part 3: Amplifiers

DIN EN 60268-3:2014 音响系统设备. 第3部分: 放大器(IEC 60268-3-2013); 德文版本EN 60268-3-2013

Sound system equipment - Part 3: Amplifiers (IEC 60268-3:2013); German version EN 60268-3:2013

NF C97-303:2014 音响系统设备. 第3部分: 放大器

La présente partie de la CEI 60268 s'applique aux amplificateurs analogiques et aux parties analogiques des amplificateurs analogiques/numériques, qui font partie d'un système électroacoustique destiné à des applications professionnelles ou grand public. Elle spécifie les caractéristiques qu'il convient d'inclure dans les spécifications des amplificateurs, ainsi que les méthodes de mesure correspondantes.

Sound system equipment - Part 3 : amplifiers

GSO IEC/TR 61292-6:2013 光放大器 第6部分：分布式拉曼放大

This part of IEC 61292, which is a technical report, deals with distributed Raman amplification (DRA). The main purpose of the report is to provide background material for future standards (specifications, test methods and operating procedures) relating to DRA. The report covers the following aspects: – general overview of Raman amplification; – applications of DRA; – performance characteristics and test methods related to DRA; – operational issues relating to the deployment of DRA. As DRA is a relatively young technology, and still rapidly evolving, some of the material in this report may become obsolete or irrelevant in a relatively short period. This technical report will be frequently updated in order to minimize this possibility.

Optical amplifiers - Part 6: Distributed Raman amplification

GSO IEC 61305-3:2013 高性能家用音频系统和设备 测量和确定性能的方法 第 (3) 部分：放大器

This part of IEC 1305 applies to household high-fidelity audio amplifiers of all types. It also applies, except where stated, to equipment having multiple functions, including audio amplifying functions. It is intended to be read in conjunction with IEC 1305-1*.

Household high-fidelity audio equipment and systems - Methods of measuring and specifying the performance - Part 3: Amplifiers

BS EN 60268-3:2013 音响系统设备.放大器

Sound system equipment. Amplifiers

DS/EN 60268-3:2013 音响系统设备 第3部分：放大器

This part of IEC 60268 applies to analogue amplifiers, and the analogue parts of analogue/digital amplifiers, which form part of a sound system for professional or household applications. It specifies the characteristics which should be included in specif

Sound system equipment - Part 3: Amplifiers

IEC 60268-3:2013 音响系统设备.第3部分:放大器(GMT)

This part of IEC 60268 applies to analogue amplifiers, and the analogue parts of analogue/digital amplifiers, which form part of a sound system for professional or household applications. It specifies the characteristics which should be included in specifications of amplifiers and the corresponding methods of measurement.

Sound System equipment - Part 3: Amplifiers (GMT)

KS C 6501-2012 锥形扬声器

CONE TYPE LOUDSPEAKERS

KS C 6027-2012 锥体扬声器的测试方法

TESTING METHODS FOR CONE TYPE LOUDSPEAKERS

LST EN 62087-2012 音频、视频和相关设备功耗的测量方法（IEC 62087:2011）

Methods of measurement for the power consumption of audio, video and related equipment (IEC 62087:2011)

ANSI/SCTE 170-2010 准备MDU放大器扩展器规范

This document provides guidance for preparing an MDU Amplifier requirements specification, independent of manufacturer and type.

Preparing an MDU Amplifier Extender Specification

ANSI/CEA 2006-B-2009 移动声频放大器的测试和测量方法

CEA-2006-B defines characteristics that, considered collectively, describe the performance of power amplifiers designed for use in mobile applications. Power amplifiers designed for use in mobile applications include, but are not limited to: separate single and multi-channel amplifiers, integrated amplifiers and bandwidth-limited amplifiers that are connected to and rely solely on the vehicle's primary electrical system for power input and have output power ratings of greater than 5 watts when measurement in accordance with CEA-2006-B.

Testing & Measurement Methods for Mobile Audio Amplifiers

ANSI/SCTE 161-2009 微量放大镜

The purpose of this specification is to recommend mechanical and electrical standards for broadband radio frequency (RF) devices whose primary purpose is to amplify signals presented to an input port and deliver the amplified signals to one or more output ports. The devices are also required to pass signals in a different range of frequencies in the return direction and, optionally, may provide amplification of such return signals. The specification's scope is limited to 75ohm devices whose ports are provided with F connectors. The most common use for such devices is on-premises RF signal distribution.

Drop Amplifiers