33.160.99 其他音频、视频和视听设备 标准查询与下载

SJ/T 11521.3-2015 数字电视接收设备交互式平台 第3部分:系统测试规范

SJ/T 11521的本部分规定了一个面向三网融合应用,支持多标准兼容、多协议融合和多业务集成的数字电视交互式软件系统架构的测试规范。本部分适用于数字电视交互式平台产品设计及研发,适用于基于该平台的交互式窗件应用开发。

Interactive platform for digital television receiving equipment.Part 3: System testing specification

SJ/T 11521.1-2015 数字电视接收设备交互式平台 第1部分:系统架构

SJ/T 11521的本部分规定了支持多标准兼容、多协议融合和多业务集成的数字电视接收设备交互式软件平台系统架构。本部分适用于数字电视接收设备交互式平台产品设计及研发,适用于基于该平台的交互式窗件应用开发。

Interactive platform for digital television receiving equipment.Part 1: System architecture

SJ/T 11521.2-2015 数字电视接收设备交互式平台 第2部分:应用编程接口

SJ/T 11521的本部分支持多标准兼容、多协议融合和多业务集成的数字电视接收设备交互式软件平台架构。本部分规定了数字电视交互式软件平台的应用编程接口。本部分适用于数字电视接收设备交互式平台产品设计及研发,适用于基于该平台的交互式窗件应用开发。

Interactive platform for digital television receiving equipment.Part 2: Application Programming Interface

GOST R IEC 61603-2-2015 使用红外线辐射的音频和/或视频以及相关信号的传输. 第2部分. 音频宽带和相关信号的传输系统

Transmission of audio and/or video and related signals using infra-red radiation. Part 2. Transmission systems for audio wide band and related signals

GOST R IEC 61603-3-2015 使用红外线辐射的音频和/或视频以及相关信号的传输. 第3部分. 用于会议和类似系统的音频信号的传输系统

Transmission of audio and/or video and related signals using infra-red radiation. Part 3. Transmission systems for audio signals for conference and similar systems

GOST R IEC 61603-6-2015 使用红外线辐射的音频和/或视频以及相关信号的传输. 第6部分. 视频和音频-视频信号

Transmission of audio and/or video and related signals using infra-red radiation. Part 6. Video and audio-visual signals

GOST R IEC 61603-7-2015 使用红外线辐射的音频和/或视频以及相关信号的传输系统. 第7部分. 用于会议和类似应用的数字音频信号

Transmission systems of audio and/or video and related signals using infra-red radiation. Part 7. Digital audio signals for conference and similar applications

GOST R IEC 61603-8-1-2015 使用红外线辐射的音频和/或视频以及相关信号的传输. 第8-1部分. 数字音频和相关信号

Transmission of audio and/or video and related signals using infra-red radiation. Part 8-1. Digital audio and related signals

GSO IEC 62637-2:2014 小型便携式多媒体设备的电池充电接口 第2部分：2 mm 桶型接口的一致性测试

This part of the IEC 62637 provides the conformance testing rules and guidelines for equipment built to meet the 2 mm barrel type charging interface specified in the 62637-1

Battery charging interface for small handheld multimedia devices - Part 2: 2 mm barrel type interface conformance testing

GSO IEC/TS 62229:2014 多媒体系统和设备 多媒体电子版和电子书 多媒体电子版概念模型

This Technical Specification describes a conceptual model for multimedia e-publishing and ebook. The conceptual model is specified from the standardization point of view in order to clarify the functionality of e-publishing/e-book components and the relationships between them and to define e-publishing services. The model provides the key technology to be standardized in e-publishing environment. It should be noted that the modelling is not intended for actual implementation of a system or system components for e-publishing. The modelling is expected to be used as a reference for discussing and developing new standardization work on multimedia e-publishing and e-books and, therefore, to contribute to the expansion of the international and domestic markets for multimedia e-publishing and e-book. The model is given as an example of the models for the multimedia data creation, data structure, equipment/system structure and user-system interface defined in IEC 61998:1998.

Multimedia systems and equipment - Multimedia e-publishing and e-book - Conceptual model for multimedia e-publishing

GSO IEC 60728-6:2014 用于电视和音频信号以及有源服务的有线网络 第6部分：光学设备

This part of IEC 60728 lays down the measuring methods, performance requirements and data publication requirements of optical equipment of cable networks for television signals, sound signals and interactive services. This standard • applies to all optical transmitters, receivers, amplifiers, directional couplers, isolators, multiplexing devices, connectors and splices used in cable networks; • covers the frequency range 5 MHz to 3 000 MHz; NOTE The upper limit of 3000 MHz is an example, but not a strict value. • identifies guaranteed performance requirements for certain parameters; • lays down data publication requirements with guaranteed performance; • describes methods of measurement for compliance testing. All requirements and published data relate to minimum performance levels within the specified frequency range and in well-matched conditions as might be applicable to cable networks for television signals, sound signals and interactive services

Cable networks for television signals, sound signals and interactive services - Part 6: Optical equipment

GSO IEC 62394:2014 消费电子网络和产品的诊断服务互操作性 在 echonet 中的应用

This International Standard specifies requirements for service diagnostic software to be implemented in products that incorporate a digital interface. It does not specify requirements for carrying out remote diagnosis or for manufacturer-dependent software. The SDI (Service Diagnostic Interface) requires an external controller (exclusive or general-purpose/PC) into which service diagnostic software can be loaded. Part of the controller software should be standardized while another part of this controller software should be unique to the manufacturer. To reach a common approach in servicing all products from all manufacturers, it is necessary to standardize specific items to be tested in products and in controllers’ diagnostic software. The SDI is based upon the ECHONET specification version 2.11, ECHONET Lite specification version 1.01 and APPENDIX Detailed Requirements for ECHONET Device objects Release B because this interface will be used in future products. The use of this connection and existing communication protocols enable implementation in products at low cost, with maximum flexibility and efficiency. The SDI consists of • specific hardware and software requirements of the device under test (DUT); • specific requirements of the controller: – the service software; – an ECHONET interface; • the connection between the controller and the DUT. This standard provides the minimal requirements necessary to carry out computerized diagnosis. It covers the standardized software of the controller as well as the standardized software and provisions in the DUT.

Service diagnostic interface for consumer electronics products and networks - Implementation for echonet

GSO IEC 62637-1:2014 小型便携式多媒体设备的电池充电接口 第1部分：2mm 桶形接口

This part of IEC 62637 defines a charging interface between small handheld multimedia devices and power-supply accessories, specifically chargers. Devices, which could be based on this standard may vary over time, but have to comply with the limited power available1. The interface is a 2 mm barrel type charging interface. This standard does not include the whole charger nor does it include the internal functions of the device. Chargers and devices shall follow the applicable EMC and safety standards. The scope of this part of IEC 62637 is illustrated in Figure 1.

Battery charging interface for small handheld multimedia devices - Part 1: 2 mm barrel interface

GOST IEC 61603-1-2014 采用红外辐射的音频和/或视频及相关信号的传输. 第1部分. 总则

Transmission of audio and/or video and related signals using infra-red radiation. Part 1. General

GSO IEC 62524:2013 多媒体系统和设备 多媒体电子出版和电子出版的电子书阅读器格式

IEC 62524:2009 specifies a reader's format for multimedia e-publishing employed for e-book data interchange among publishers and readers, satisfying a number of readers' requirements such as being non-revisable, equipment-adaptive and application-adaptive.

Multimedia systems and equipment - Multimedia e-publishing and e-books - Reader's format for e-publishing

LST EN 62665-2012 多媒体系统和设备 多媒体电子出版和电子书技术 用于印刷文本听觉呈现的纹理图（IEC 62665:2012）

Multimedia systems and equipment - Multimedia e-publishing and e-book technologies - Texture map for auditory presentation of printed texts (IEC 62665:2012)

IEC 62665:2012 多媒体系统和设备 - 多媒体电子出版和电子图书技术 - 印刷文本听觉呈现的纹理贴图

This International Standard specifies ?C a text encoding scheme to generate a texture map; ?C a physical shape and dimension of the texture map for printing; ?C additional features for texture map printing; ?C texture map decoding and an auditory presentation of decoded texts. These specifications enable the interchange of documents and publications between visually impaired and non-impaired people.

Multimedia systems and equipment - Multimedia e-publishing and e-books technologies - Texture map for auditory presentation of printed texts

DB34/T 1616-2012 幼教点读笔

本标准规定了幼教点读笔的术语和定义、技术要求、试验方法、检验规则、标志、包装、运输、贮存。 本标准适用于家庭环境幼教点读笔。

preschool education point reading pen

DS/EN 62637-2:2012 小型手持多媒体设备的电池充电接口 第2部分：2 mm 桶型接口一致性测试

This part of the IEC 62637 provides the conformance testing rules and guidelines for equipment built to meet the 2 mm barrel type charging interface specified in the 62637-1.

Battery charging interface for small handheld multimedia devices - Part 2: 2 mm barrel type interface conformance testing

DS/EN 62637-1:2012 小型手持多媒体设备的电池充电接口 第1部分：2 毫米桶形接口

This part of IEC 62637 defines a charging interface between small hand held multimedia devices and power-supply accessories, specifically chargers. Devices, which could be based on this standard may vary over time, but have to comply with the limited power available1.The interface is a 2 mm barrel type charging interface. The scope does not include the whole charger nor does it include the internal functions of the device. Chargers and devices shall follow the applicable EMC and safety standards. The scope of this part of IEC 62637 is illustrated in Figure 1.

Battery charging interface for small handheld multimedia devices - Part 1: 2 mm barrel interface