33.180.20 纤维光学和光学互连器件 标准查询与下载

BS EN IEC 61300-3-33:2022 光纤互连装置和无源元件 基本测试和测量程序 检查和测量 使用销规从弹性对准套筒中拔出力

What is BS EN IEC 61300-3-33 - Withdrawal force of ferrule of fibre optic devices about? BS EN IEC 61300-3-33 is the 33 rd part of the IEC 61300-3 series that discusses basic test and measurement procedures and examinations for fibre optic interconnecting devices and passive components. BS EN IEC 61300-3-33 describes the procedure to measure the withdrawal force between the pin gauge and the resilient alignment sleeve. This measurement procedure is applicable to single-fibre cylindrical ferrule optical connectors. Who is BS EN IEC 61300-3-33 - Withdrawal force of ferrule of fibre optic devices for ? BS EN IEC 61300-3-33 on fibre optic interconnecting devices and passive components is useful for: Telecommunication equipment and component manufacturers Design engineers Quality control personnel Research and development facilities Why should you use

Fibre optic interconnecting devices and passive components. Basic test and measurement procedures - Examinations and measurements. Withdrawal force from a resilient alignment sleeve using pin gauges

BS EN IEC 61754-4:2022 光纤互连装置和无源元件 光纤连接器接口 SC 型连接器系列

1   Scope This part of IEC 61754 specifies the standard interface dimensions for type SC family of connectors.

Fibre optic interconnecting devices and passive components. Fibre optic connector interfaces. Type SC connector family

EN 50411-3-6:2022 光纤通信系统中使用的光纤管理系统和保护外壳 产品规范 第 3-6 部分：多模机械光纤接头

1.1 Product definition This document contains the initial, start of life dimensional, optical, mechanical and environmental performance requirements, which multimode mechanical splice needs to meet in order for it to be categorized as a European standard product. Although, in this document, the product is qualified for EN IEC 60793 2 10 types A1-OM1, A1-OM2, A1-OM3, A1-OM4 and A1-OM5 multimode fibres, it can also be suitable for other fibre types with 125 µm cladding diameter. 1.2 Interoperability The installed mechanical splice fits into optical fibre management system with optical splice cassettes or splice trays as defined in EN IEC 61756 1. This document specifies the following two physical interface dimensions: — cross sectional profile with width, height or diameter (in millimetres); — length (in millimetres). 1.3 Expected performance In this document, the performance of the mechanical splice is given with identical fibres only as specified in Annex A. Losses associated with tolerances in fibre cladding diameter and core diameter mismatch are not taken into account. The measured attenuation is a function of the core concentricity, cladding non-circularity and alignment capability. The optical return loss performance is a function of the index matching gel and the fibre end face preparation 1.4 Operating environment The tests selected combined with the severities and durations are representative of an outdoor enclosed environment category OP as defined in EN IEC 61753 1:2018, Table A.5. To ensure that the product can be used in outdoor closures, boxes or street cabinets for categories A, G or S (as defined in EN IEC 61753 1:2018, Tables A.13, A.14 and A.15) the specified lower temperature is extended to −40 °C and a water immersion requirement for temporary flooding conditions has been added. 1.5 Reliability Whilst the anticipated service life expectancy of the product in this environment is at least 20 years, compliance with this specification does not guarantee the reliability of the product. This is expected to be predicted using a recognized reliability assessment programme. 1.6 Quality assurance Compliance with this specification does not guarantee the manufacturing consistency of the product. This is expected to be maintained using a recognized quality assurance programme.

Fibre management systems and protective housings to be used in optical fibre communication systems - Product specifications - Part 3-6: Multi- mode mechanical fibre splice

22/30438350 DC BS EN 63267-2-2 光纤互连装置和无源元件 光纤连接器多模光纤接口 第 2-2 部分 连接 50 μm 芯径的多模物理接触光纤 无角度和有角度的…

BS EN 63267-2-2. Fibre optic interconnecting devices and passive components. Fibre optic connector multimode optical interfaces - Part 2-2. Connection of 50 μm core diameter multimode physically contacting fibres. Non-angled and angled for…

IEC 61300-1:2022 纤维光学互连器件和无源元件基本试验和测量程序第1部分:总则和指南

Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 1: General and guidance

IEC 61300-1:2022 RLV 纤维光学互连器件和无源元件基本试验和测量程序第1部分:总则和指南

Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 1: General and guidance

EN IEC 61753-091-02:2022 光纤互连设备和无源元件 性能标准 第 091-02 部分：C 类非连接器 3 端口不完全循环单模光纤环行器 受控环境

This part of IEC 61753 contains the minimum test and measurement requirements and severities which a fibre optic circulator as specified by IEC 62077 should satisfy in order to be categorized as meeting the requirements of circulators used in controlled environments as specified in IEC 61753-1:2018, COR1:2019 and AMD1:2020. The requirements cover non-connectorized single-mode fibre 3-port incompletely circulated type optical circulators for category C used in controlled environments.

Fibre optic interconnecting devices and passive components - Performance standard - Part 091-02: Non-connectorized 3-port incompletely circulated single-mode fibre optic circulators for category C - Controlled environments

22/30453219 DC BS EN IEC 61300-2-27 光纤互连装置和无源元件 基本测试和测量程序 第 2-27 部分 测试 灰尘 层流

BS EN IEC 61300-2-27. Fibre optic interconnecting devices and passive components. Basic test and measurement procedures - Part 2-27. Tests. Dust. Laminar flow

22/30453223 DC BS EN IEC 61300-2-44 光纤互连装置和无源元件 基本测试和测量程序 第 2-44 部分 测试 光纤器件和组件的应变消除的弯曲

BS EN IEC 61300-2-44. Fibre optic interconnecting devices and passive components. Basic test and measurement procedures - Part 2-44. Tests. Flexing of the strain relief of fibre optic devices and components

IEC 61754-4:2022 纤维光学互连器件和无源元件.纤维光学连接器接口.第4部分:SC型连接器系列

Fibre optic interconnecting devices and passive components - Fibre optic connector interfaces - Part 4: Type SC connector family

IEC 61754-4:2022 RLV 纤维光学互连器件和无源元件.纤维光学连接器接口.第4部分:SC型连接器系列

Fibre optic interconnecting devices and passive components - Fibre optic connector interfaces - Part 4: Type SC connector family

IEC 61754-6:2022 纤维光学互连器件和无源元件.纤维光学连接器接口.第6部分:MU型连接器系列

Fibre optic interconnecting devices and passive components - Fibre optic connector interfaces - Part 6: Type MU connector family

IEC 61754-6:2022 RLV 纤维光学互连器件和无源元件.纤维光学连接器接口.第6部分:MU型连接器系列

Fibre optic interconnecting devices and passive components - Fibre optic connector interfaces - Part 6: Type MU connector family

IEC 61753-091-02:2022 纤维光学互连器件和无源元件.性能标准.第091-02部分:C类非连接的3端口不完全循环单模纤维光学环行器.受控环境

Fibre optic interconnecting devices and passive components - Performance standard - Part 091-02: Non-connectorized 3-port incompletely circulated single-mode fibre optic circulators for category C - C

IEC 61300-3-33:2022 纤维光学互连器件和无源元件.基本试验和测量程序.第3-33部分:检查和测量.使用销规从弹性定位套管中拔出的力

Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 3-33: Examinations and measurements - Withdrawal force from a resilient alignment sleeve using

IEC 62150-6:2022 纤维光学有源元件和器件.试验和测量程序.第6部分:光子器件试验和测量用通用夹层板

Fibre optic active components and devices - Test and measurement procedures - Part 6: Universal mezzanine boards for test and measurement of photonic devices

BS EN IEC 61753-131-03:2021 光纤互连装置和无源元件 性能标准 OP 类单模机械光纤接头 室外受保护环境

What is BS EN IEC 61753‑131‑03 about?    BS EN IEC 61753 is a series on fibre optic interconnecting devices and passive components. Fibre optic interconnecting devices and passive components is a fibre-optic  telecommunications technology for delivering  broadband  network access to end customers. BS EN IEC 61753‑131‑03 for mechanical splices defines the requirements for standard optical performance under a set of specified conditions. BS EN IEC 61753‑131‑03 contains the minimum tests, test severities and measurement requirements that a mechanical fibre splice need to satisfy in order to be categorized as meeting the requirements of single-mode fibre splice for use in category OP (Outdoor protected) environments.   BS EN IEC 61753‑131‑03 contains a ser...

Fibre optic interconnecting devices and passive components. Performance standard - Single-mode mechanical fibre splice for category OP. Outdoor protected environment

IEC TS 63334:2021 纤维光学互连器件和无源元件.无源光学保护外壳和硬化纤维光学连接器（IP5X IPX4 IPX5 IPX6）防尘和防水试验条件

Fibre optic interconnecting devices and passive components - Conditions for testing the protection against dust and water ingress of passive optical protective housings and hardened fibre optic connec

BS EN IEC 61753-111-07:2021 光纤互连装置和无源元件 性能标准 密封封闭 A 类 航拍

Fibre optic interconnecting devices and passive components. Performance standard. Sealed closures. Category A. Aerial

BS EN IEC 61753-111-09:2021 光纤互连装置和无源元件 标准性能 密封封闭 S 类 地下

Fibre optic interconnecting devices and passive components. Performance standard. Sealed closures. Category S. Subterranean