33.180.20 纤维光学和光学互连器件 标准查询与下载

BS EN IEC 61753-043-02:2022 光纤互连装置和无源元件 性能标准 单工跳线式单模光纤波长选择装置 带有 C 类圆柱形插芯连接器 受控环境

This part of IEC 61753 specifies the test requirements for wavelength selective cords used in a controlled environment (category C) according to IEC 61753-1:2018, where the connectors already comply with the category C requirements of IEC 61753-1:2018. The tests selected are a subset of the connector tests from IEC 61753-1:2018 appropriate for requalification with additional requirements relevant to cords and the connector/cable interface.

Fibre optic interconnecting devices and passive components. Performance standard - Simplex patch-cord style single-mode fibre wavelength selective devices with cylindrical ferrule connectors for category C. Controlled environment

BS EN IEC 62077:2022 光纤互连装置和无源元件 光纤循环器 通用规格

1   Scope This document applies to circulators used in the field of fibre optics bearing all of the following features: – they are non-reciprocal optical devices, in which each port is either an optical fibre or fibre optic connector; – they are passive devices in accordance with the categorization and definition provided in IEC TS 62538; – they have three or more ports for directionally transmitting optical power. An example of optical circulator technology and application is described in Annex A and Annex B, respectively.

Fibre optic interconnecting devices and passive components. Fibre optic circulators. Generic specification

BS EN IEC 61300-2-5:2022 光纤互连装置和无源元件 基本测试和测量程序 测试 捻

1   Scope The purpose of this part of IEC 61300 is to determine the ability of the cable attachment element of the device under test (DUT) to withstand torsional loads that can be experienced during installation and normal service.

Fibre optic interconnecting devices and passive components. Basic test and measurement procedures. Tests. Torsion

EN IEC 61300-3-35:2022 光纤互连设备和无源元件 基本测试和测量程序 第 3-35 部分：检查和测量 光纤连接器和光纤短截线收发器的目视检查

IEC 61300-3-35:2022 is concerned with the observation and classification of debris, scratches and defects. The inspection requirements are based on IEC TR 62627-05. Advice for cleaning of contamination from fibres/ferrule is found in IEC TR 62627-01 and a recommendation is given in Annex D. IEC TR 62572-4 provides the cleaning method for a stub for optical transceivers. Visual inspection is in addition to, and does not replace measurement of performance parameters such as attenuation and return loss, or end face parameters. The dimensions specified are chosen such that they can be easily estimated. Not only the zones A and B on the fibre are inspected for defects and scratches but the whole contact area (where the two fibres/ferrules meet when mated) needs to be inspected for contamination (this is up to 250 µm diameter for cylindrical ferrules and the whole ferrule surface for rectangular ferrules).The objectives of this document are the following: - specify the minimum criteria for a microscope to be compliant to this document; - specify the procedure and criteria for inspecting fibre-optic end faces for cleanliness to determine if the end faces are fit for use. All connector optical interfaces (IEC 61755 series and IEC 63267 series) are based on physical contact between fibre cores; - provide quantitative criteria for the analysis of end face images. This third edition cancels and replaces the second edition published in 2015. This edition constitutes a technical revision. This edition includes the following significant technical changes with respect to the previous edition: - adding of a statement that visual inspection is not a substitute for optical qualification such as attenuation and return loss measurement; - adding of some terms and definitions; - adding requirements for SM 35 dB connectors; - adding of a sentence in Clause 5 concerning the susceptibility of the methods to system variability and variability within systems from same supplier; - removal of inspection requirements for zones C and D; - insertion of a generic cleanliness specification for whole rectangular ferrule and 250 µm area around every fibre; - adding a cleaning recommendation for rectangular and cylindrical ferrules; - outer edge of inspection zone B has changed from 115 µm to 110 µm to meet manufacturing tolerances of fixture for microscopes; - change that defects that are partly in core are only to be judged for the part they are in the core. The remainder of the defect is considered to be located in the cladding. - adding a statement that a connector cannot be rejected by just failing visual inspection. Meeting the specified optical performance determines the use of this connector.

Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 3-35: Examinations and measurements - Visual inspection of fibre optic connectors and fibre-stub transceivers

EN IEC 61300-2-5:2022 光纤互连装置和无源元件 基本测试和测量程序 第 2-5 部分：测试 扭转

IEC 61300-2-5:2022 determines the ability of the cable attachment element of the device under test (DUT) to withstand torsional loads that can be experienced during installation and normal service. This fourth edition cancels and replaces the third edition published in 2009. This edition constitutes a technical revision. This edition includes the following significant technical changes with respect to the previous edition: - the terms and definitions clause was added; - the procedure description was modified; - new subsections are included in Clause 6 for a better sequence description; - Figure 1 was improved and Figure 2 was updated in text descriptions; - the severity of the test was updated according to the component and operation conditions.

Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 2-5: Tests - Torsion

EN IEC 61755-2-2:2022 光纤互连设备和无源元件 单模光纤连接器光学接口 第 2-2 部分：色散未位移物理接触光纤的连接参数 成角度

IEC 61755-2-2:2022 defines a set of prescribed conditions for a single-mode fibre optic connection that is maintained in order to satisfy the requirements of attenuation and return loss (RL) performance in a randomly mated pair of angled polished physically contacting (APC) fibres. The model uses a Gaussian distribution of light intensity over the specified mode field diameter (MFD) for determination of attenuation performance grades, based on MFD mismatch and the amount of lateral and angular fibre core offsets. Attenuation and RL performance grades are defined in IEC 61755-1. This second edition cancels and replaces the first edition published in 2006. This edition constitutes a technical revision. This edition includes the following significant technical changes with respect to the previous edition: - addition of normative references and visual requirements; - reconsideration of the whole parts of the text to avoid misuse of the standard.

Fibre optic interconnecting devices and passive components - Connector optical interfaces for single-mode fibres - Part 2-2: Connection parameters of dispersion unshifted physically contacting fibres - Angled

EN IEC 61300-2-43:2022 光纤互连装置和无源元件 基本测试和测量程序 第 2-43 部分：测试 单模 PC 光纤连接器回波损耗的筛选测试

IEC 61300-2-43:2022 is available as IEC 61300-2-43:2022 RLV which contains the International Standard and its Redline version, showing all changes of the technical content compared to the previous edition.IEC 61300-2-43: 2022 aims at screening single-mode physical contact (PC) optical fibre connector plugs of an optical fibre patch cord or an optical fibre pigtail in terms of return loss, thus ensuring minimum return loss when the connector plugs are randomly mated with each other in the field. This document is intended to apply to cylindrical ferrule connector plugs. This third edition cancels and replaces the second edition published in 2014. This edition constitutes a technical revision. This edition includes the following significant technical change with respect to the previous edition: addition of Clause 3 containing terms, definitions, and abbreviated terms.

Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 2-43: Tests - Screen testing of return loss of single-mode PC optical fibre connectors

EN IEC 61755-2-1:2022 光纤互连设备和无源元件 单模光纤连接器光学接口 第 2-1 部分：色散未位移物理接触光纤的连接参数 非成角度

IEC 61755-2-1:2022 defines a set of prescribed conditions for a single-mode fibre optic connection that is maintained in order to satisfy the requirements of attenuation and return loss (RL) performance in a randomly mated pair of non-angled polished physically contacting (PC) fibres. The model uses a Gaussian distribution of light intensity over the specified mode field diameter (MFD) for determination of attenuation performance grades, based on MFD mismatch and the amount of lateral and angular fibre core offsets. Attenuation and RL performance grades are defined in IEC 61755-1. This second edition cancels and replaces the first edition published in 2006. This edition constitutes a technical revision. This edition includes the following significant technical changes with respect to the previous edition: addition of normative references and visual requirement tables; reconsideration of the whole parts of the text to avoid misuse of the standard.

Fibre optic interconnecting devices and passive components - Connector optical interfaces for single-mode fibres - Part 2-1: Connection parameters of dispersion unshifted physically contacting fibres - Non-angled

EN IEC 61753-043-02:2022 光纤互连设备和无源元件 性能标准 第 043-02 部分：C 类圆柱形套圈连接器的单工跳线式单模光纤波长选择设备 受控环境

This part of IEC 61753 specifies the test requirements for wavelength selective cords used in a controlled environment (Category C) according to IEC 61753-1: 2018, where the connectors already comply with the Category C requirements of IEC 61753-1: 2018. The tests selected are a subset of the connector tests from IEC 61753-1: 2018 appropriate for requalification with additional requirements relevant to cords and the connector/cable interface.

Fibre optic interconnecting devices and passive components - Performance standard - Part 043-02: Simplex patch-cord style single-mode fibre wavelength selective devices with cylindrical ferrule connectors for category C - Controlled environment

ASTM F2071-00(2022) 光纤位置接近（非接触）或限制（机械接触）开关的标准规范

1.1 This specification covers the requirements for fiberoptic position switches (proximity and limit). This specification does not include switches that transfer an optical signal from one path to another by an external force or energy applied to the switch. 1.2 Special requirements for naval shipboard applications are included in the Supplement. 1.3 The values stated in SI units are to be regarded as standard. The values given in parentheses are mathematical conversions to inch-pound units that are provided for information only and are not considered standard. Where information is to be specified, it shall be stated in SI units. 1.4 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use. 1.5 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

Standard Specification for Switch, Position Proximity (Noncontact) or Limit (Mechanical Contact), Fiber-Optic

BS EN IEC 61753-053-02:2022 光纤互连装置和无源元件 性能标准 适用于 C 类的非连接器、单模光纤、电控、可变光衰减器 受控环境

1   Scope This part of IEC 61753 contains the minimum initial test and measurement requirements and severities which non-connectorized single-mode fibre electrically controlled variable optical attenuator needs to satisfy in order to be categorised as meeting the requirements of category C – Controlled environments, as defined in Annex A of IEC 61753‑1:2018.

Fibre optic interconnecting devices and passive components. Performance standard. Non-connectorized, singlemode fibre, electrically controlled, variable optical attenuator for category C. Controlled environments

EN IEC 61753-089-02:2022 光纤互连设备和无源元件 性能标准 第 089-02 部分：C 类非连接器单模双向 OTDR 监测 WWDM 室内受控环境

This part of IEC 61753 contains the minimum initial test and measurement requirements and severities which a fibre-optic pigtailed wide wavelength division multiplexing (WWDM) device for monitoring passive optical networks (PON) using an optical time-domain reflectometer (OTDR) satisfies in order to be categorised as meeting the requirements of categorie C (Indoor controlled environment), as defined in annex A of IEC 61753-1 2018. WWDM is defined in IEC 62074-1.

Fibre optic interconnecting devices and passive components - Performance standard - Part 089-02: Non-connectorised single-mode bidirectional OTDR monitoring WWDM for category C - Indoor controlled environment

IEC 62148-12:2004+AMD1:2022 CSV 纤维光学有源元件和器件.包装和接口标准.第12部分:带同轴射频连接器的激光发射机

Fibre optic active components and devices - Package and interface standards - Part 12: Laser transmitters with a coaxial RF connector

IEC 62148-12:2004/AMD1:2022 修改件1.纤维光学有源元件和器件.包装和接口标准.第12部分:带同轴射频连接器的激光发射机

Amendment 1 - Fibre optic active components and devices - Package and interface standards - Part 12: Laser transmitters with a coaxial RF connector

EN IEC 62077:2022 光纤互连装置和无源元件 光纤环行器 通用规范

IEC 62077:2022 is available as IEC 62077:2022 RLV which contains the International Standard and its Redline version, showing all changes of the technical content compared to the previous edition.IEC 62077: 2022 applies to circulators used in the field of fibre optics bearing all of the following features: - they are non-reciprocal optical devices, in which each port is either an optical fibre or fibre optic connector; - they are passive devices in accordance with the categorization and definition provided in IEC TS 62538; - they have three or more ports for directionally transmitting optical power. An example of optical circulator technology and application is described in Annex A and Annex B, respectively. This fourth edition cancels and replaces the third edition published in 2015. This edition constitutes a technical revision. This edition includes the following significant technical changes with respect to the previous edition: - harmonization of terms and definitions with IEC TS 62627-09; - change of Clause 4 regarding requirements

Fibre optic interconnecting devices and passive components - Fibre optic circulators - Generic specification

IEC 61300-3-35:2022 纤维光学互连器件和无源元件.基本试验和测量程序.第3-35部分:检查和测量.纤维光学连接器和纤维短截线收发器的目视检查

Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 3-35: Examinations and measurements - Visual inspection of fibre optic connectors and fibre-st

IEC 61755-1:2022 纤维光学互连器件和无源元件.单模光纤连接器光学接口.第1部分:色散非移位光纤的光学接口.总则和指南

Fibre optic interconnecting devices and passive components - Connector optical interfaces for single-mode fibres - Part 1: Optical interfaces for dispersion unshifted fibres - General and guidance

IEC 61755-2-2:2022 纤维光学互连器件和无源元件.单模光纤连接器光学接口.第2-2部分:色散非移位物理接触光纤的连接参数.角度

Fibre optic interconnecting devices and passive components - Connector optical interfaces for single-mode fibres - Part 2-2: Connection parameters of dispersion unshifted physically contacting fibres

IEC 61300-2-5:2022 纤维光学互连器件和无源元件.基本试验和测量程序.第2-5部分:试验.扭转

Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 2-5: Tests - Torsion

EN IEC 61753-053-02:2022 光纤互连设备和无源元件 性能标准 第 053-02 部分：非连接器、单模光纤、电控、C 类可变光学衰减器 受控环境

IEC 61753-053-02: 2022 contains the minimum initial test and measurement requirements and severities which non-connectorized single-mode fibre electrically controlled variable optical attenuator needs to satisfy in order to be categorised as meeting the requirements of category C – Controlled environments, as defined in Annex A of IEC 61753-1:2018. This first edition cancels and replaces IEC 61753-053-2 published in 2014. This edition constitutes a technical revision. This edition includes the following significant technical changes with respect to IEC 61753-053-2:2014: a) harmonization of terms and definitions with those in IEC 60869-1 and IEC TS 62627-09; b) harmonization of test items and their conditions with IEC 61753‑1:2018 and IEC 61753‑1:2018/AMD1:2020.

Fibre optic interconnecting devices and passive components - Performance standard - Part 053-02: Non-connectorized, single-mode fibre, electrically controlled, variable optical attenuator for category C - Controlled environments