35.100.40 传输层 标准查询与下载
共找到 163 条与 传输层 相关的标准，共 11 页
The procedures specified in this Recommendation | International Standard operate as extensions to those defined in ITU-T Rec. X.224 | ISO/IEC 8073 and ITU-T Rec. X.234 | ISO/IEC 8602 and do not preclude unprotected communication between transport entities implementing ITU-T Rec. X.224 | ISO/IEC 8073 or ITU-T Rec. X.234 | ISO 8602. The protection achieved by the security protocol defined in this Recommendation | International Standard depends on the proper operation of security management including key management. However, this Recommendation | International Standard does not specify the management functions and protocols needed to support this security protocol. This protocol can support all the integrity, confidentiality, authentication and access control services identified in CCITT Rec. X.800 I ISO 7498-2 as relevant to the transport layer. The protocol supports these services through use of cryptographic mechanisms, security labelling and attributes, such as keys and authenticated identities, pre-established by security management or established through the use of the Security Association — Protocol (SA-P). Protection can be provided only within the context of a security policy. This protocol supports peer-entity authentication at the time of connection establishment. In addition, rekeying is supported within the protocol through the use of SA-P or through means outside the protocol. Security associations can only be established within the context of a security policy. It is a matter for the users to establish their own security policy, which may be constrained by the procedures specified in this Recommendation | International Standard. The following items could be included in a Security Policy: a) the method of SA establishment/release, the lifetime of SA; b) Authentication/Access Control mechanisms; c) Label mechanism; d) the procedure of the receiving an invalid TPDU during SA establishment procedure or transmission of protected PDU; e) the lifetime of Key; f) the interval of the rekey procedure in order to update key and security control information (SCI) exchange procedure; g) the time out of SCI exchange and rekey procedure; h) the number of retries of sci exchange and rekey procedure. this Recommendation | International Standard defines a protocol which may be used for Security Association establishment. Entities wishing to establish an SA must share common mechanisms for authentication and key distribution. this Recommendation | International Standard specifies one algorithm for authentication and key distribution which is based on public key crypto systems. The implementation of this algorithm is not mandatory; however, when an alternative mechanism is used, it shall satisfy the following conditions: a) All SA attributes defined in 5.2 are derived. b) Derived keys are authenticated.
Information technology -- Telecommunications and information exchange between systems -- Transport layer security protocol
- ICS
- 35.100.40
- CCS
- 发布
- 2013-12-31
- 实施
This Recommendation | International Standard specifies: a) Two modes of procedures when operating over the connection oriented network service: 1) mode 0: acts on network signalled errors; 2) mode 4: ignores network signalled errors, for the connection oriented transfer of data and control information from one transport entity to a peer transport entity. b) The means of selecting the mode of procedures to be used by the transport entities. c) The structure and encoding of the TPDUs used for the transfer of data and control information. The procedures are defined in terms of: a) the interactions between peer transport entities through the exchange of TPDUs; b) the interactions between a transport entity and the transport service user in the same system through the exchange of transport service primitives; c) the interactions between a transport entity and the network service provider through the exchange of network service primitives. These procedures are applicable to instances of communication between systems which support the Transport Layer of the OSI Reference Model and wish to interconnect in the open systems environment using the Transport Fast Byte Protocol. This Recommendation | International Standard specifies, in clause 8, conformance requirements for systems implementing these procedures and provides the PICS proforma in compliance with the relevant requirements, and in accordance with the relevant guidance, given in ITU-T Rec. X.296 and ISO/IEC 9646-7. It does not contain tests which can be used to demonstrate this conformance.
Information technology -- Open Systems Interconnection -- Transport Fast Byte Protocol
- ICS
- 35.100.40
- CCS
- 发布
- 2013-12-31
- 实施
This Recommendation | Technical Report describes the cross layer aspects of the provision of security services in the lower layers of the OSI Reference Model (Transport, Network, Data Link and Physical layers). This Recommendation | Technical Report describes: a) architectural concepts common to the lower layers based on those defined in CCITT Rec. X.800 | ISO 7498-2; b) the basis for interactions relating to security between protocols in the lower layers; c) the basis for any interactions relating to security between the lower layers and upper layers of OSI; d) the placement of security protocols in relation to other lower layer security protocols and the relative role of such placements. There should be no conflict between the security protocols for the lower layers and the model described in this Recommendation | Technical Report. CCITT Rec. X.500 | ISO/IEC 9594-1 identifies the security services relevant to each of the lower layers of the OSI Reference Model.
Information technology -- Lower layers security
- ICS
- 35.100.40
- CCS
- 发布
- 2013-12-31
- 实施
Information technology－Enhanced communications transport service definition
- ICS
- 35.100.40
- CCS
- 发布
- 20131223
- 实施
- 20131223
Information technology－Enhanced communications transport service definition
- ICS
- 35.100.40
- CCS
- 发布
- 2013-12-23
- 实施
本标准规定了能源计量数据采集与传输通讯协议术语和定义、系统结构、协议层次、通讯协议。 本标准适用于能源计量数据采集系统中能源计量数据公共平台与能源计量数据采集终端之间的数 据交换传输。
Energy metering data acquisition and transmission communication protocol technical specification
- ICS
- 35.100.40
- CCS
- L 78
- 发布
- 2013-02-04
- 实施
- 2013-03-04
HL7 Version 3 Standard: Abstract Transport Specification, Release 1
- ICS
- 35.100.40
- CCS
- C50
- 发布
- 2013-01-01
- 实施
Information technology－Telecommunications and information exchange between systems－Transport conformance testing for connection-mode transport protocol operating over connection-mode network service－Part 3：Transport test management protocol specification
- ICS
- 35.100.40
- CCS
- 发布
- 20121228
- 实施
- 20121228
Information technology－Telecommunications and information exchange between systems－Formal description of ISO 8073(Classes 0, 1, 2, 3) in LOTOS
- ICS
- 35.100.40
- CCS
- 发布
- 20121228
- 实施
- 20121228
Information technology－Telecommunications and information exchange between systems－Formal description of ISO 8073(Classes 0, 1, 2, 3) in LOTOS
- ICS
- 35.100.40
- CCS
- 发布
- 2012-12-28
- 实施
Information technology－Telecommunications and information exchange between systems－Transport conformance testing for connection-mode transport protocol－Part 1：Test suite structure and test purposes for ISO/IEC 8073：1988 classes 0, 2 over CONS and 4 over C
- ICS
- 35.100.40
- CCS
- 发布
- 2012-12-28
- 实施
Information technology－Telecommunications and information exchange between systems－Transport conformance testing for connection-mode transport protocol operating over connection-mode network service－Part 3：Transport test management protocol specification
- ICS
- 35.100.40
- CCS
- 发布
- 2012-12-28
- 实施
Information technology - Enhanced communications transport protocol: Specification of QoS management for duplex multicast transport
- ICS
- 35.100.40
- CCS
- L79
- 发布
- 2010-05
- 实施
Information technology - Enhanced communications transport protocol: Specification of QoS management for n-plex multicast transport
- ICS
- 35.100.40
- CCS
- L79
- 发布
- 2010-05
- 实施
本标准规定了数据交换传输的过程，以及定义了数据交换传输的参数命令、交互命令、数据命令和控制命令的数据格式和代码。 本标准适用于能源计量数据采集系统中的能源计量能源数据公共平台和能源计量数据集中采集终端之问的数据交换传输。
Data Transmission Protocol for Energy Metering Data Acquisition System
- ICS
- 35.100.40
- CCS
- L78
- 发布
- 2010-03-17
- 实施
- 2010-03-20
Information technology－Telecommunications and information exchange between systems－Formal description of ISO 8073(Classes 0, 1, 2, 3) in LOTOS
- ICS
- 35.100.40
- CCS
- 发布
- 2008-10-31
- 实施
Information technology－Telecommunications and information exchange between systems－Formal description of ISO 8073(Classes 0, 1, 2, 3) in LOTOS
- ICS
- 35.100.40
- CCS
- 发布
- 2008-10-31
- 实施
This Recommendation | International Standard specifies the N-plex multicast transport connection in which all participants are TS-users and one of them is TC-Owner. The N-plex multicast transport connection allows TS-users to send the multicast data to all the group members. It is noted that a TS-user is allowed to send the multicast data to the group, only if it gets a token from TC-Owner. This Specification describes the protocol for supporting the N-plex multicast transport, which includes the connection management (establishment, termination, user join and leave) and the reliability control mechanisms for the multicast data transport.
Information technology - Enhanced communications transport protocol: Specification of N-plex multicast transport
- ICS
- 35.100.40
- CCS
- L79
- 发布
- 2008-04-15
- 实施
This Recommendation | International Standard specifies the Enhanced Communications Transport Protocol (ECTP), which is a transport protocol to support Internet multicast applications over the multicast-capable IP networks. This Recommendation | International Standard specifies the ECTP part 3 (ECTP-3) for the duplex multicast transport connection in which the participants are classified into one TC-Owner and many TS-users. The duplex multicast transport connection supports two kinds of data transport: the multicast data transport from TC-owner to all the other TS-users and the unicast data transport from TS-users to TC-Owner. A TS-user is allowed to send unicast data to TC-Owner, only if it gets a token from TC-Owner. This Specification describes the protocol for supporting the duplex multicast transport, which includes the connection management (establishment, termination, pause, resumption, user join and leave) and the reliability control mechanisms for the multicast and unicast data transport. In particular, the protocol operations for the multicast data transport from TC-Owner to the TS-users will be designed with the congruency of the simplex multicast transport protocol (ECTP-1), as specified in ITU-T Rec. X.606 | ISO/IEC 14476-1.
Information technology - Enhanced communications transport protocol: Specification of duplex multicast transport
- ICS
- 35.100.40
- CCS
- L79
- 发布
- 2008-04
- 实施
This document defines a transport for HL7 content, messages and documents, using ebXML.
HL7 Version 3 Standard: Transport Specification - ebXML, Release 1
- ICS
- 35.100.40
- CCS
- L79
- 发布
- 2008
- 实施
