35.220.22 磁带 标准查询与下载

JIS X 6102:1993 信息交换用磁带卷盘

この規格は，JIS X 6101に規定された情報交換用磁気テープ(以下，テープという。)を巻くための情報交換用磁気テープりール(以下，リールという。)について規定する。

Magnetic tape reel for information interchange

EN 21864:1993 信息技术.信息交换用12.7 mm(0.5英寸)宽空白磁带.32etpm(800 ftpi)NRZI,相位编码的126epmm(3200ftpi)和356ftpmm(9042 ftpi)NRZI(ISO/IEC 1864-1992)

This International Standard specifies the characteristics of 12,7 mm (0,5 in) wide magnetic tape with reel, to enable magnetic and mechanical interchangeability of such tape between informationprocessing systems.

Information Technology - Unrecorded 12,7 mm (0.5 in) Wide Magnetic Tape for Information Interchange - 32 ftpmm (800 ftpi), NRZ1, 126 ftpmm (3 200 ftpi) Phase Encoded and 356 ftpmm (9 042 ftpi), NRZ1

NF Z64-132:1992 信息处理.使用126次频率变换/mm下相位编码的信息交换用9磁道、12.7mm宽磁带.63 CPMM(1600 CPI)

Information processing. 9-track, 12,7 mm (0,5 in) wide magnetic tape for information interchange using phase encoding at 126 ftpmm (3200 ftpi). 63 cpmm (1600 cpi).

BS ISO/IEC 1863:1992 信息处理.采用不旧零按1变化制、以32磁通变换/mm(800磁通变换/in)进行信息交换用9磁道、宽12.7mm(0.5in)的磁带.32cpmm(800cpmm)

Provides a format and recording standard for 9-track, 12, 7 mm /0, 5 in) wide magnetic tape and reels to be used for information interchange among information processing systems, communication systems, and associated equipment utilizing the 7-bit coded character set specified in ISO 646 or its 7-bit or 8-bit extensions specified in ISO 2022.

Information processing - 9-track, 12,7 mm (0,5 in) wide magnetic tape for information interchange using NRZ1 at 32 ftpmm (800 ftpi) - 32 cpmm (800 cpi)

BS ISO/IEC 1863:1990 信息处理 9 轨、12.7 毫米（0.5 英寸）宽磁带 用于使用 NRZ1 以 32 ftpmm（800 ftpi）进行信息交换 32 cpmm (800 cpi)

1   Scope This International Standard specifies a format and recording standard for 9- track , 12,7 mm (0,5 in) magnetic tape to be used for data interchange between information processing systems, communication systems, and associated equipment utilizing the 7-bit coded character set (see ISO 646), its extension in ISO 2022 where required, and the 8-bit coded character set (see ISO 4873). Magnetic labelling for use on magnetic tape is the subject of ISO 1001. The magnetic tape and reel to be used shall conform to ISO 1864 and/or ISO 8064. NOTE - Numeric values in the SI and/or Imperial measurement system in this International Standard may have been rounded off and therefore are consistent with, but not exactly equal to, each other. Either system may be used, but the two should be neither intermixed nor reconverted. The original design was made using the Imperial measurement system.

Information processing. 9-track, 12,7 mm (0,5 in) wide magnetic tape for information interchange using NRZ1 at 32 ftpmm (800 ftpi). 32 cpmm (800 cpi)

JIS X 0652:1992 电子预压系统间通过磁带进行的线性数据交换的用户交换格式

User exchange format for the exchange of line art data between electronic prepress systems via magnetic tape

DS/ISO 5652:1992 信息处理 用于信息交换的 9 轨 12.7 毫米（0.5 英寸）宽磁带 格式和记录，使用 246 cpmm（6250 cpi）的组编码

The standard specifies a format and recording standard for 9-track, 12,7 mm (0,5 in) magnetic tape to be used for data interchange between information processing systems, communication tion systems, and associated equipment utilizing the 7-bit coded character set (see ISO 646), its extension in ISO 2022 where required, and the 8-bit coded character set (see ISO 4873). Magnetic labelling for use on magnetic tape is subject of ISO 1001. The magnetic tape and reel to be used shall...

Information processing - 9-Track, 12,7 mm (0.5 in) wide magnetic tape for information interchange - Format and recording, using group coding at 246 cpmm (6250 cpi)

ISO/IEC 1864:1992 信息技术 信息交换用12.7mm(0.5 in)未记录宽磁带 32 ftpmm(800 frpi)不归零制 126 ftpmm(3200 ftpi)调相制和356 ftpmm(9042 ftpi)不归零制

Specifies the characteristics of the magnetic tape with reel, to enable magnetic and mechanical interchangeability of such tape between information processing systems.

Information technology; unrecorded 12,7 mm (0,5 in) wide magnetic tape for information interchange; 32 ftpmm (800 ftpi), NRZ1, 126 ftpmm (3200 ftpi) phase encoded and 356 ftpmm (9042 ftpi), NRZ1

ANSI/INCITS 204-1992 信息系统.用于信息交换的记录磁带.15和18道,0.250-inch(6.35-mm)10000 bpi(394 bpmm)串流模式,群码记录 代替ANSI X3.204-1992 [被代替: ANSI X3.204, ANSI X3.204]

This standard provides the requirements for a standard for a streaming 0.250 inch (6.30 mm), wide, 15 & 18 Track, magnetic tape in a cartridge to be used for information interchange between information processing systems, communications systems, and associated equipment utilizing a standard code for information interchange, as agreed upon by the interchange parties. This standard refers solely to recording on magnetic tape.

Information Systems - Recorded Magnetic Tape for Information Interchange 15 and 18 Track, 0.250-inch (6.35-mm) 10 000 bpi (394 bpmm) Streaming Mode, Group Code Recording Replaces ANSI X3.204-1992 [Replaced: ANSI X3.204, ANSI X3.204]

JIS X 6101:1991 信息互换用磁带

この規格は，計数形電子計算機及び類似の機械相互間で交換する情報の記録媒体として用いる磁気テープ(以下，テープという。)について規定する。

Magnetic tape for information interchange

JIS X 0651:1991 通过磁带进行电子预编辑系统间色彩画像数据互换的用户交换格式

User exchange format for the exchange of color picture data between electronic prepress systems via magnetic tape

ISO/IEC 8441-1:1991 信息技术 高密度数字记录(HDDR) 第1部分:HDDR应用的未记录磁带

This part of ISO/IEC 8441 specifies requirements for unrecorded magnetic tape designed for high density digital recording (HDDR) having the following characteristics: a) nominal thickness 25,4 μm (0,001 in); b) longitudinal magnetic orientation; c) coercivity 72 kA/m (900 Oe) max. These tapes are suitable for interchange in accord-ance with ISO/IEC 8441-2. Requirements for packaging are also included. NOTE 1 Tapes of coercivity above 32 kA/m (400 Oe) are usually classified as high energy tapes and users should establish compatibility with equipment used for driving them. Annex A gives guidance on glass and metal-flanged reels. Annex B gives information on the wear of re-cording heads. Different categories of environmental conditions and their effects on tape are dealt with in annex C. Severe operating conditions are con-sidered in annex D. Surface electrical resistance testing is dealt with in annex E. A tape abrasivity testing technique is described in annex F. A list of bibliographical references is given in annex G. NOTES 2 It is recognized that archival interchange tapes, or those produced by systems in use prior to the publication of this part of ISO/IEC 8441, may not comply with the re-quirements and/or recommendations herein. 3 Various tests and procedures herein refer to recording with a.c. HF bias. In practice, certain HDDR systems do not use bias. The use of bias in this part of ISO/IEC 8441 does not imply that the tape so tested is in any way un-suitable for a biasless system.

Information technology; high density digital recording (HDDR); part 1: unrecorded magnetic tape for (HDDR) applications

JIS X 6106:1991 12.7mm磁带用自装入式盒式磁带

この規格は，JIS X 6101に規定する27形情報交換用磁気テープ(以下，テープという。)に使用するセルフローディングカートリッジについて規定する。

Self-loading cartridges for 12.7 mm wide magnetic tape

BS ISO/IEC 3788:1990 信息处理.信息交换用以126ftpmm(3200ftpi)、63cpmm(1600cpi)速率相位编码的9磁道、12.7mm(0.5in)宽磁带

This International Standard specifies a format and recording standard for 9-track, 12,7 mm (0,5 in) magnetic tape to be used for data interchange be-tween information processing systems, communi-cation systems, and associated equipment utilizing the 7-bit coded character set (see ISO 646), its ex-tension in ISO 2022 where required, or an 8-bit coded character set (see ISO 4873). Magnetic label-ling for use on magnetic tape is the subject of ISO 1001. The magnetic tape and reel to be used shall conform to ISO 1864 and/or ISO 8064. NOTE 1 Numeric values in the SI and/or Imperial measurement system in this International Standard may have been rounded off and therefore are consistent with, but not exactly equal to, each other. Either system may be used, but the two should be neither intermixed nor re-converted. The original design was made using the Impe-rial measurement system.

Information processing - 9-track, 12,7 mm (0,5 in) wide magnetic tape for information interchange using phase encoding at 126 ftpmm (3200 ftpi) - 63 cpmm (1600 cpi)

ISO/IEC 3788:1990 信息处理 以126 itpmm(3200 ftpi)、63 pmm(1600 cpi)磁带调相制,信息交换用9磁道12.7mm(0.5in)宽磁带

Provides a format and recording standard for 9-track, 12,7 (0,5 in) wide magnetic tape and reels to be used for information interchange among information processing systems, communication systems, and associated equipment utilizing the 7-bit coded character set specified in ISO 646 or its 7-bit or 8-bit extensions specified in ISO 2022. References: ISO 962; 1001; 1864.

Information processing; 9-track, 12,7 mm (0,5 in) wide magnetic tape for information interchange using phase encoding at 126 ftpmm (3200 ftpi); 63 cpmm (1600 cpi)

ISO/IEC 1863:1990 信息处理 信息交换用9磁道12.7mm(0.5 in)宽磁带 32 ftpmm(800 ftpi)不归零制 32 cpmm(800 cpi)

Provides a format and recording standard for 9-track, 12,7 mm /0,5 in) wide magnetic tape and reels to be used for information interchange among information processing systems, communication systems, and associated equipment utilizing the 7-bit coded character set specified in ISO 646 or its 7-bit or 8-bit extensions specified in ISO 2022.

Information processing; 9-track, 12,7 mm (0,5 in) wide magnetic tape for information interchange using NRZ1 at 32 ftpmm (800 ftpi); 32 cpmm (800 cpi)

JIS X 0601:1990 信息处理.信息交换磁带的标记与文件结构

Information processing -- File structure and labelling of magnetic tapes for information interchange

ANSI/INCITS 187-1990 设备数据纵向记录用可记录磁带

This standard provides instrumentation tape and recorder/reproducer characteristics and modes of recording to allow users of different systems to interchange analog data recorded on instrumentation magnetic tape. This standard deals solely with the requirements for recording on magnetic tape. Compliance with the proposed standard for unrecorded tape, American National Standard for Information Systems - Unrecorded Magnetic Tape for Longitudinal Recording of Instrumentation Data - Interchange, X3 project 747-0, ') will be a requirement for information exchange.

Recorded Magnetic Tape for Longitudinal Recording of Instrumentation Data-Interchange

ISO/IEC TR 6371:1989 信息处理 未记录计测磁带的互换实践和测试方法

Describes interchange requirements for longitudinal-oriented, unrecorded magnetic tape wound on reels or hubs designed for instrumentation-recording applications. Recording and playback of the tapes shall be done on equipment according to ISO 6068 and to the application instructions of the manufacturer.

Information processing; interchange practices and test methods for unrecorded instrumentation magnetic tape

GOST 28123-1989 信息处理系统.12.7mm宽、9轨迹、记录密度为246bit/mm的磁带.技术要求

Information processing systems. 12,7-mm 9-track magnetic tapes with the density of recording 246 bit/mm. Technical requirements