37.100.10 标准查询与下载
共找到 739 条与 相关的标准，共 50 页
本标准规定了单张纸聚氨酯(PUR)胶覆膜机(以下简称覆膜机)的术语和定义、组成、基本参数、要求、试验方法、检验规则、标志、包装、运输和贮存。 本标准适用于使用聚氨酯(PUR)胶粘剂对单张纸(包括未印刷的纸张和纸基印刷品)与卷筒塑料薄膜进行复合的机型。
Printing machinery.Sheet-fed polyurethane adhesive laminator
- ICS
- 37.100.10
- CCS
- J87
- 发布
- 2016-01-15
- 实施
- 2016-06-01
本标准规定了数字式一体化速印机测试版(以下简称测试版)的技术要求、试验方法、检验规则、标志、包装、运输和贮存。 本标准适用于最大幅面为A3及A3以下的数字式一体化速印机的质量检验及安装调机等。
Test chart for digital stencil duplicators
- ICS
- 37.100.10
- CCS
- N47
- 发布
- 2016-01-15
- 实施
- 2016-06-01
本标准规定了各类印刷机及其主要结构部件以及与印刷机质量相关的技术参数的基本术语和定义，以保证在生产、教学和学术等活动中正确应用专业概念。 本标准适用于在印刷机械专业或相关专业编写标准、出版、教学及国内外技术交流中使用。
Termionoloy of printing press
- ICS
- 37.100.10
- CCS
- J87
- 发布
- 2016-01-15
- 实施
- 2016-06-01
本标准规定了单张纸平压平压纹机的型式、基本参数、技术要求、试验方法、检验规则、标志、包装、运输和贮存。 本标准适用于以平压平方式一次性走纸完成压纹的单张纸压纹机(以下简称压纹机)。
Printing machinery.Sheet-fed pressure platen embossing machine
- ICS
- 37.100.10
- CCS
- J87
- 发布
- 2016-01-15
- 实施
- 2016-06-01
本标准规定了卷筒料平压平轻型模切机(以下简称模切机)的术语和定义、型式、基本参数、要求、检验方法、检验规则、标志、包装、运输和贮存。 本标准适用于以卷筒料为原材料，模切压力小于8×10 N，以平压平的方式进行模切，并可实现收卷、清废、裁切等功能的模切机。
Printing machinery.Roll-stock planten light-duty die cutter machine
- ICS
- 37.100.10
- CCS
- J87
- 发布
- 2016-01-15
- 实施
- 2016-06-01
ISO/IEC 24734:2014 specifies a method for measuring the productivity of digital printing devices with various office applications and print job characteristics. It is applicable to digital printing devices, including single-function and multi-function devices, regardless of print technology (e.g. inkjet, laser). Devices can be equipped with a range of paper feed and finishing options either directly connected to the computer system or via a network. It is intended to be used for black and white (B&W) as well as colour digital printing devices. It allows for the comparison of the productivity of machines operating in various available modes (simplex, duplex, size of substrates, etc.) and office applications when the test system environment, operating modes, and job mix for each machine are held identical. ISO/IEC 24734:2014 includes test files, test setup procedure, test runtime procedure, and the reporting requirements for the digital printing productivity measurements. ISO/IEC 24734:2014 is not intended to be used for devices which are not able to print on a media size of A4/8.5"x11" or for devices, which are not able to collate multiple copies of a print. ISO/IEC 24734:2014 is not intended to replace a manufacturer's rated speeds. The productivity of a digital printing device depends on factors other than the printing device itself. These include, but are not limited to, computer manufacturer and model, central processor type and speed, RAM and hard disk memory capacity and speed, software driver, version of the application being used, operating system, and the type and speed of the communication path from computer to printing device, etc. Because of this, in order to make useful and accurate direct comparisons of printing productivity with ISO/IEC 24734:2014, the same computer system hardware and software have to be used for measuring the printing devices, if, for the purpose of being directly compared one to another. For every printing productivity measurement, the basic specifications of the computer hardware and software have to be included with the results of the printing productivity measurement.
Information technology - Office equipment - Method for measuring digital printing productivity
- ICS
- 37.100.10
- CCS
- 发布
- 2015-12-21
- 实施
Scope is not provided for this standard
Graphic technology -- Safety requirements for graphic technology equipment and systems -- Part 3: Binding and finishing equipment and systems
- ICS
- 37.100.10
- CCS
- 发布
- 2015-12-21
- 实施
Scope is not provided for this standard
Graphic technology -- Safety requirements for graphic technology equipment and systems -- Part 2: Prepress and press equipment and systems
- ICS
- 37.100.10
- CCS
- 发布
- 2015-12-21
- 实施
Scope is not provided for this standard
Duplicating machines -- Registration
- ICS
- 37.100.10
- CCS
- 发布
- 2015-12-21
- 实施
Scope is not provided for this standard
Graphic technology -- Blankets for offset printing
- ICS
- 37.100.10
- CCS
- 发布
- 2015-12-21
- 实施
ISO/IEC 24735:2012 specifies a method for measuring the "productivity" of digital copying devices and multifunctional devices with various copying modes. It is applicable to digital copying devices and multifunctional devices equipped with automatic document feeder and collating function.
Information technology - Office equipment - Method for measuring digital copying productivity
- ICS
- 37.100.10
- CCS
- 发布
- 2015-12-21
- 实施
Scope is not provided for this standard
Graphic technology -- Safety requirements for graphic technology equipment and systems -- Part 5: Stand-alone platen presses
- ICS
- 37.100.10
- CCS
- 发布
- 2015-12-21
- 实施
ISO/IEC 29112 defines methods for the objective measurement of the print quality characteristics that contribute to the perceived resolution of reflection mode monochrome printed pages produced by digital electro-photographic printers. The measurement methods used in ISO/IEC 29112 are derived from several existing techniques for the assessment of an imaging system's resolution characteristics. Each of these measurement methods is intended for the engineering evaluation of a printing system's perceived resolution and not for purposes of advertising claims. The methods are applicable only to monochrome prints produced in reflection mode by electro-photographic printing technology. ISO/IEC 29112 is intended for monochrome printers utilizing postscript interpreters capable of accepting postscript and encapsulated postscript (EPS) jobs.
Information technology - Office equipment - Test charts and methods for measuring monochrome printer resolution
- ICS
- 37.100.10
- CCS
- 发布
- 2015-12-21
- 实施
Scope is not provided for this standard
Graphic technology -- Safety requirements for graphic technology equipment and systems -- Part 4: Converting equipment and systems
- ICS
- 37.100.10
- CCS
- 发布
- 2015-12-21
- 实施
ISO/IEC TR 29186:2012 is a supplement to CIE 156:2004, applicable for use in evaluating the colour gamut mapping algorithms of office colour softcopy and hardcopy equipment. ISO/IEC TR 29186:2012 defines test charts, test chart image processing workflow, media, viewing conditions, measurements, colour spaces and experimental methods, suitable for use with office equipment, which either do not exist in CIE 156:2004 or are different from CIE 156:2004. Colour softcopy may be displayed on monitors, incorporating display technologies such as CRT and LCD. Colour hardcopy may be produced by non-impact colour printers, including technologies such as ink jet and electro photography.
Information technology -- Office equipment -- Test method of colour gamut mapping algorithm for office colour softcopy and hardcopy
- ICS
- 37.100.10
- CCS
- 发布
- 2015-12-21
- 实施
ISO/IEC 29103:2011 defines a set of test images in a common file format, JPEG, that are used in the testing of cartridge yield for printing of photographs. The defined documents are used in ISO/IEC 29102 to determine the photo yield of cartridges in an inkjet-based printing system.
Information technology - Office equipment - Colour photo test pages for measurement of ink cartridge yield for colour photo printing
- ICS
- 37.100.10
- CCS
- 发布
- 2015-12-21
- 实施
Scope is not provided for this standard
Graphic technology -- Plates for offset printing -- Dimensions
- ICS
- 37.100.10
- CCS
- 发布
- 2015-12-21
- 实施
Method for the determination of ink cartridge yield for colour inkjet printers and multi-function devices that contain printer components
- ICS
- 37.100.10
- CCS
- L63
- 发布
- 2015-11-30
- 实施
- 2015-11-30
Method for the determination of ink cartridge yield for colour inkjet printers and multi-function devices that contain printer components
- ICS
- 37.100.10
- CCS
- N47
- 发布
- 2015-11-01
- 实施
本标准规定了小型切纸机的术语和定义，型式、基本参数、型号和名称，以及要求、检验方法、检验规则、标志、包装、运输和贮存。 本标准适用于裁切书刊、小规格的平板纸张和其他类似纸质材料的小型切纸机。
Printing machinery.Small cutting machine
- ICS
- 37.100.10
- CCS
- J87
- 发布
- 2015-10-10
- 实施
- 2016-03-01
