标准-分析测试百科网

GSO ISO/IEC 29102:2017 信息技术办公设备喷墨打印机和包含喷墨打印机组件的多功能设备进行彩色打印的墨盒照片产量的测定方法

The purpose of this International Standard is to provide a method to determine the ink cartridge photo yield of ink-containing cartridges (i.e. integrated ink cartridges and ink cartridges without integrated print heads) for colour photo printing with colour inkjet printers and multi-function devices that contain inkjet printer components. Ink cartridge yields determined on one printer model, paper and cartridge configuration are not applicable to another printer model or cartridge configuration even if the ink jet cartridges used in testing are the same. This International Standard prescribes the following: • the test method that manufacturers, test labs, etc. use to determine ink cartridge photo yield; • the method for determination of declared photo yield values from the test results; and • the appropriate method of describing the photo yield of cartridges in documentation supplied to the consumer by the manufacturer. This International Standard is only intended for the determination of ink cartridge photo yield. No other claims can be made from this testing regarding quality, reliability, etc. This International Standard can be used to determine the yield of any cartridge that is used during the printing of the photo test file defined in ISO/IEC 29103. This International Standard is not for use with printers whose minimum printable size is equal to or greater than A3. This International Standard is not intended to measure the yield of photo printing on paper size larger than 4x6, L or A6. In addition, this International Standard is not for use with industrial printers or point of sale printers. It only applies to desktop printing systems.

Information technology -- Office equipment -- Method for the determination of ink cartridge photo yield for colour printing with inkjet printers and multi-function devices that contain inkjet printer components

ICS: 37.100.10
CCS
发布: 2017-10-03
实施

GSO ISO/IEC 29183:2017 信息技术办公设备单面原件数字复印生产率的测量方法

This International Standard specifies a method for measuring productivity of digital copying devices and multifunctional devices with various copying modes and a single one-sided original. It is applicable to digital copying devices and multifunctional devices. It is intended to be used for black-and-white and colour digital copying devices and multifunctional devices of any underlying marking technology. This International Standard includes instructions for the creation of test charts, test setup procedure, test procedure, and the reporting requirements for the digital copying productivity measurements. This International Standard is not intended to replace manufacturer's rated speeds.

Information technology -- Office equipment -- Method for measuring digital copying productivity of a single one-sided original

ICS: 37.100.10
CCS
发布: 2017-10-03
实施

GSO ISO/IEC 16680:2017 信息技术开放组服务集成成熟度模型（OSIMM）

Pain-p oints define where the organization considers that its processes need to be improved, and can be used to focus the subsequent OSIMM analysis. The assessor should gather material that can help determine the desired goal states of the SOA maturity levels. This material includes strategy documents, user requirements, and enterprise architecture artifacts. At this stage, an initial list of pain-points or strategic goals is determined. Once this is done the scope and structure of the SOA roadmap and transformation can be determined. The dimensions and domains in the OSIMM may be used to assist the definition of the scope.

Information technology -- The Open Group Service Integration Maturity Model (OSIMM)

ICS: 37.100.10
CCS
发布: 2017-10-03
实施

CAN/CGSB-53.148-2017(R2022) 再制造墨粉盒

This National Standard of Canada specifies the manufacturing, performance and labelling requirements for remanufactured toner cartridges for monochrome laser print devices, including but not limited to printers, multifunction devices, copiers and facsimile (fax) machines. NOTE Some cartridges, because of their original OEM design and construction, may be more suitable than others for remanufacturing. Moreover, the life of the drum depends on the roughness of the paper used, the amount of continuous use (causing overheating), the length of time the printer is left switched on, and the quantity of graphics (as distinct from text) printed. Consequently, no definite statement can be made about the number of times a cartridge can be remanufactured. The testing and evaluation of a product against this standard may require the use of materials and/or equipment that could be hazardous. This document does not purport to address all the safety aspects associated with its use. Anyone using this standard has the responsibility to consult the appropriate authorities and to establish appropriate health and safety practices in conjunction with any applicable regulatory requirements prior to its use.

Remanufactured toner cartridges

ICS: 37.100.10
CCS
发布: 2017-09-01
实施

CAN/CGSB-53.148-2017(C2022) 再制造墨粉盒

La présente Norme nationale du Canada prescrit les exigences relatives à la fabrication, au rendement et à l’étiquetage des cartouches de toner remises à neuf pour les dispositifs d’impression au laser monochromes, y compris, mais sans s’y limiter, les imprimantes, les appareils à fonctions multiples, les photocopieurs et les télécopieurs. NOTE Certaines cartouches, en raison de leur conception et de leur fabrication, peuvent se prêter mieux que d’autres au procédé de remise à neuf. De plus, la durée de vie du tambour dépend de la rugosité du papier utilisé, de la fréquence d’utilisation de l’imprimante en continu (donnant lieu à des surchauffes), de la durée de mise sous tension de l’imprimante et de la quantité de graphiques imprimés (par opposition aux textes). Ainsi, il est impossible d’établir le nombre de fois qu’une cartouche peut être remise à neuf. La mise à l’essai et l’évaluation d’un produit en regard de la présente norme peuvent nécessiter l’emploi de matériaux ou d’équipement susceptibles d’être dangereux. Le présent document n’entend pas traiter de tous les aspects liés à la sécurité de son utilisation. Il appartient à l’usager de la norme de se renseigner auprès des autorités compétentes et d’adopter des pratiques de santé et de sécurité conformes aux règlements applicables avant de l’utiliser.

Remanufactured toner cartridges

ICS: 37.100.10
CCS
发布: 2017-09-01
实施

CAN/CGSB-53.148-2017 再制造硒鼓

Remanufactured toner cartridges

ICS: 37.100.10
CCS
发布: 2017-09-01
实施

IEC 62899-301-2:2017 印刷电子 - 第301-2部分:设备 - 接触印刷 - 刚性主板 - 印版主尺寸的测量方法

This part of IEC 62899 defines measurement terms and methods related to the critical dimension of features and the registration accuracy of features on rigid plate masters. General critical dimensions are defined to evaluate the shape accuracy of features on the plate master. To evaluate the registration accuracy of features on the plate master@ the specification for the registration mark for the plate master is specified. Then@ common metrology procedures to measure the critical dimensions and the registration accuracy of the plate master are established for device manufacturers@ printing master manufacturers and printing master manufacturing equipment vendors. The measurement terms which are measured by agreement between the user and the supplier are measured using the measurement methods given in this document.

Printed electronics - Part 301-2: Equipment - Contact printing - Rigid master - Measurement method of plate master pattern dimension