37.100.10 标准查询与下载
共找到 739 条与 相关的标准，共 50 页
本文件规定了智能双螺旋横向分切机的型式与基本参数、基本要求、技术要求、试验方法、检验规则、标志、包装、运输和贮存及质量承诺。 本文件适用于对单卷筒纸或多卷筒纸及类似纸质的带状原始材料进行横向分切的设备（以下简称分切机）。
Intelligent double rotary web-to-sheet cutting machine
- ICS
- 37.100.10
- CCS
- C354
- 发布
- 2021-09-09
- 实施
- 2021-09-30
本文件规定了机组式柔性版印刷机（以下简称“柔印机”）的组成与基本参数、基本要求、技术要求、检验方法、检验规则、标志、包装、运输与贮存和质量承诺。 本文件适用于印刷最大走料宽度不大于1 120 mm的纸张、塑料薄膜及复合材料的柔印机，其它类型的柔印机也可参照执行。
Moudular unit flexographic press
- ICS
- 37.100.10
- CCS
- C354
- 发布
- 2021-09-01
- 实施
- 2021-09-18
本文件规定了全自动停回转式网版印刷机的术语和定义、基本参数、基本要求、技术要求、试验方法、检验规则和标志、包装、随机文件、运输及贮存、质量承诺。 本文件适用于承印物为单张纸或类似材料的全自动停回转式网版印刷机（以下简称印刷机）。
Full-automatic stop cylinder printing machiner
- ICS
- 37.100.10
- CCS
- C354
- 发布
- 2021-09-01
- 实施
- 2021-09-23
Information technology - Print cartridge characterization - Part 1: General: terms, symbols, notations and cartridge characterization framework
- ICS
- 37.100.10
- CCS
- 发布
- 2021-08-31
- 实施
Graphic technology - Safety requirements for graphic technology equipment and systems - Part 5: Manually-fed stand-alone platen presses (ISO/DIS 12643-5:2021)
- ICS
- 37.100.10
- CCS
- 发布
- 2021-08-15
- 实施
- 2021-08-15
前言 1 范围 2 规范性引用文件 3 术语和定义 4 要求 4.1 外观结构 4.2 揭膜力 4.3 运转性能 4.4 印品质量 4.5 页产量 4.6 环境适应性 4.7 安全与环保 4.8 再利用 4.9 标识标志 4.10 包装、运输及贮存 5 检测方法 5.1 测试条件 5.2 外观结构 5.3 揭膜力 5.4 运转性能 5.5 印品质量 5.6 页产量 5.7 环境适应性 5.8 安全与环保 5.9 再利用 5.10 标识标志 5.11 包装及贮存 6 检验 6.1 检验类别 6.2 检验项目与检验数量 6.3 质量一致性检验
Technical specification for office equipment-electrostatic photographic color cartridge
- ICS
- 37.100.10
- CCS
- C347
- 发布
- 2021-08-02
- 实施
- 2022-03-04
前言 1 范围 2 规范性引用文件 3 术语和定义 4 要求 4.1 产品外观与结构 4.2 印品质量 4.3 净含量及偏差 4.4 墨水残留量 4.5 环境适应性 4.6 运输包装件跌落适应性 4.7 环保 4.8 再利用 4.9 标识标志 4.10 包装、运输及贮存 5 检测方法 5.1 检测条件 5.2 产品外观与结构 5.3 印品质量 5.4 墨水净含量 5.5 墨水残留量 5.6 环境适应性 5.7 运输包装件跌落适应性 5.8 环保 5.9 标识标志 5.10 包装和贮存 6 检验规则 6.1 检验类别 6.2 产品批次 6.3 检验项目
Technical specification for office equipment ink-jet cartridge of the printer
- ICS
- 37.100.10
- CCS
- C347
- 发布
- 2021-08-02
- 实施
- 2022-03-04
BS EN ISO 12643-5. Graphic technology. Safety requirements for graphic technology equipment and systems - Part 5. Manually-fed stand-alone platen presses
- ICS
- 37.100.10
- CCS
- 发布
- 2021-07-20
- 实施
- 2021-07-20
Information technology. Office equipment. Method for measuring digital copying productivity
- ICS
- 37.100.10
- CCS
- 发布
- 2021-07-07
- 实施
- 2021-07-07
ISO/IEC 29142-3:2013 describes the principles and framework for environmental assessment of ink and toner cartridges used in printing devices that have a digital input printing path, including multi-function devices, including: a) the goals and definitions related to environmental responsibility; b) guidance to determine the relative benefits of reuse, recycling, recovery, and reduction techniques; c) identification and prioritization of environmental attributes according to each phase of the cartridge life-cycle; d) criteria for establishing environmentally sustainable practices. ISO/IEC 29142-3:2013 establishes foundational terms, definitions, attributes, and test methods for cartridge environmental standards, environmental labels, and green procurement criteria. ISO/IEC 29142-3:2013 standardizes treatment of environmental interactions and impacts throughout the cartridge life-cycle, and promotes harmonization of environmental standards, environmental labels, and green procurement criteria pertaining to ink and toner cartridges, thereby reducing impact on the environment and informing and benefiting the cartridge customer. ISO/IEC 29142-3:2013 establishes environmental terms, definitions, attributes and test methods in accordance with the terms, symbols, notations and framework of ISO/IEC 29142-1 and ISO Guide 64.
Information technology — Print cartridge characterization — Part 3: Environment
- ICS
- 37.100.10
- CCS
- 发布
- 2021-07-01
- 实施
ISO 19594:2017 specifies a test method for the determination of the binding strength of perfect-bound products by pulling out single sheets from the book block in an upward direction.
Graphic technology — Test method for the determination of the binding strength for perfect-bound products — Page-pull test working upwards
- ICS
- 37.100.10
- CCS
- 发布
- 2021-07-01
- 实施
ISO/IEC 19799:2007 defines methods and processes for measuring objective print quality attributes for the assessment of gloss non-uniformity on printed pages in reflection mode, and provides transforms, when applicable, that relate the objective results to subjective responses if appropriate. The gloss uniformity attributes included in ISO/IEC 19799:2007 are differential gloss, gloss uniformity within a page, and gloss consistency within a run. ISO/IEC 19799:2007 provides a definition of gloss uniformity attributes representative of the print quality on reflection prints, a set of print files for the creation of printed pages for gloss uniformity measurement, a procedure for gloss uniformity testing and the analysis of the resulting data, a method for evaluating and grading these measurements and deriving an assessment of gloss uniformity, the appropriate method of describing the gloss uniformity of printing and copying systems in documentation supplied to the consumer by the manufacturer. The reflection prints that are to be used for measurement can be created via printers or copiers (analog and digital). ISO/IEC 19799:2007 is applicable only to electro-photographic based prints. It does not address the measurement of gloss attributes of printed pages in transmission mode.
Information technology — Method of measuring gloss uniformity on printed pages
- ICS
- 37.100.10
- CCS
- 发布
- 2021-07-01
- 实施
ISO/IEC 17823:2015 provides definitions for colour terms used with office equipment, in particular for use with colour scanning and printing devices that have digital imaging capabilities, including multi-function devices. ISO/IEC 17823:2015 is not intended to replace terms and definitions published in documents or user interfaces issued or created by manufacturers.
Information technology — Office equipment — Colour terminology for office colour equipment
- ICS
- 37.100.10
- CCS
- 发布
- 2021-07-01
- 实施
Graphic technology - Safety requirements for graphic technology equipment and systems - Part 5: Manually-fed stand-alone platen presses (ISO/DIS 12643-5:2021)
- ICS
- 37.100.10
- CCS
- 发布
- 2021-07-00
- 实施
Graphic technology. Plates for offset printing. Dimensions
- ICS
- 37.100.10
- CCS
- 发布
- 2021-06-15
- 实施
- 2021-06-15
1.1 This standard contains the definitions of terms as used in reference to printing ink vehicles and related materials. 1.2 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.
Standard Terminology for Printing Ink Vehicles and Related Materials
- ICS
- 37.100.10
- CCS
- 发布
- 2021-06-01
- 实施
This document specifies the width, length and thickness of metal lithographic printing plates (referred to hereafter as “plates”). For plates to be used in computer to plate (CtP) applications, flatness, edge straightness and burr requirements are also included. These requirements are applicable to unprocessed plates.
Graphic technology - Plates for offset printing - Dimensions
- ICS
- 37.100.10
- CCS
- 发布
- 2021-06-00
- 实施
本文件规定了干法复合机维护保养术语和定义、基本规定、维护保养项目及要求、记录。 本文件适用于干法复合机的维护保养。
Dry compound machine maintenance technical regulations
- ICS
- 37.100.10
- CCS
- J 87
- 发布
- 2021-04-30
- 实施
- 2021-05-30
What is ISO/IEC 29183 about? ISO/IEC 29183 discusses Office equipment. ISO/IEC 29183 specifies a general method for measuring the productivity of digital copying devices and multifunctional devices with various copying modes and a single one-sided original. ISO/IEC 29183 specifies instructions for the creation of test charts, test procedures, and reporting requirements for the digital copying productivity measurements. Note1: ISO/IEC 29183 is intended to be used for black and white (B&W) as well as colour digital copying devices and multifunctional devices of any underlying marking technology. Note 2:
Information technology. Office equipment. Method for measuring digital copying productivity for a single one-sided original
- ICS
- 37.100.10
- CCS
- 发布
- 2021-04-30
- 实施
- 2021-04-30
本文件规定了卷筒料机组式柔版印刷机维护保养的术语和定义、基本规定、维护保养项目及要求、 记录。 本文件适用于卷筒料机组式柔版印刷机的维护保养。
Technical regulations for the maintenance of web-type flexographic printing machines
- ICS
- 37.100.10
- CCS
- J 87
- 发布
- 2021-04-30
- 实施
- 2021-05-30
