43.080.10 卡车和挂车 标准查询与下载
共找到 265 条与 卡车和挂车 相关的标准，共 18 页
This European Standard applies to body structures on commercial vehicles and on trailers with a maximum total weight of more than 3 500 kg. This European Standard sets out basic minimum requirements for standard vehicle bodies (side walls, front and rear walls) and for reinforced vehicle bodies and specifies appropriate tests. This European Standard does not apply to swap bodies, nor to box type vans, i.e. vehicles where the driver cabin and the cargo space form one unit.
Securing of cargo on road vehicles - Body structure of commercial vehicles - Minimum requirements
- ICS
- 43.080.10
- CCS
- T43
- 发布
- 2007-03-30
- 实施
- 2007-03-30
Securing of cargo on road vehicles - Body structure of commercial vehicles - Minimum requirements
- ICS
- 43.080.10
- CCS
- 发布
- 2007-01-31
- 实施
- 2007-01-31
This specification covers the requirements and verification testing for crash-resistant, ballistic-tolerant fuel cell for use in rotorcraft and tilt rotorcraft. Exact design criteria such as fuel cell dimensions, total weight, and interface requirements will be dependent upon the intended aircraft specified in the contract or purchase order.
TANK, FUEL, CRASH-RESISTANT, BALLISTIC-TOLERANT, AIRCRAFT
- ICS
- 43.080.10
- CCS
- T58
- 发布
- 2007-01-30
- 实施
Securing of cargo on road vehicles - Body structure of commercial vehicles - Minimum requirements.
- ICS
- 43.080.10
- CCS
- T43
- 发布
- 2007-01-01
- 实施
- 2007-01-05
This European Standard applies to body structures on commercial vehicles and on trailers with a maximum total weight of more than 3 500 kg. This European Standard sets out basic minimum requirements for standard vehicle bodies (side walls, front and rear walls) and for reinforced vehicle bodies and specifies appropriate tests. This European Standard does not apply to swap bodies, nor to box type vans, i.e. vehicles where the driver cabin and the cargo space form one unit.
Securing of cargo on road vehicles - Body structure of commercial vehicles - Minimum requirements; German version EN 12642:2006
- ICS
- 43.080.10
- CCS
- T43
- 发布
- 2007-01
- 实施
- 2007-01-01
This European Standard specifies the requirements for product discharge and air inlet valves for use on transportable tanks with a minimum working pressure greater than 50 kPa for the transport of dangerous goods by road and rail.It is applicable to equipment for use on tanks with gravity and/or pressure discharge.
Tanks for the transport of dangerous goods - Tank equipment for the transport of liquid chemicals - Product discharge and air inlet valves
- ICS
- 43.080.10
- CCS
- 发布
- 2006-07-27
- 实施
- 2006-07-27
This European Standard specifies the requirements for footvalves for use on transportable tanks with a minimum working pressure greater than 50 kPa for the transport of dangerous goods by road and rail.It is applicable to equipment for use on tanks wit
Tanks for the transport of dangerous goods - Tank equipment for the transport of liquid chemicals - Foot valves
- ICS
- 43.080.10
- CCS
- 发布
- 2006-07-27
- 实施
- 2006-07-27
This SAE Information Report establishes a consistent procedure for measuring and analyzing the natural sway response of a particular trailer when attached to a particular vehicle under specific loading and operating conditions. This test procedure applies, but is not limited to, passenger cars, vans, light/medium-duty trucks as tow vehicles, and semitrailers with a Gross Vehicle Weight Rating (GVWR) of 11 794 kg (26 000 pounds) or less. Other applications include full trailers, tow dollies, tow bars, and the like. Other articulated vehicles can utilize this test procedure as long as the test does not exceed the linear behavior of the system. This test procedure does not apply to motorcycles towing trailers.
Trailer Sway Response Test Procedure
- ICS
- 43.080.10
- CCS
- T71
- 发布
- 2006-06-01
- 实施
- 2017-10-12
This European Standard specifies equipment and accessories for road tankers used for the transport of Liquefied Petroleum Gas (LPG) and identifies the equipment that is considered necessary to ensure that filling, transportation and discharge operations can be carried out safely. It also specifies the requirements for the assembly of the accessories and the vehicle LPG equipment to the road tanker. This European Standard also identifies additional equipment and accessories that may be used on road tankers carrying LPG. NOTE This European Standard does not preclude the use of alternative designs, materials and equipment testing which provide a similar level of safety. This European Standard does not apply to "tank-containers" and "battery-vehicles" used for the transportation of LPG.
LPG equipment and accessories - Equipping of LPG road tankers; English version of DIN EN 12252:2006-04
- ICS
- 43.080.10
- CCS
- T58
- 发布
- 2006-04
- 实施
本标准规定了牵引座的术语和定义、型号、技术条件、检验规则、标志、使用说明书、运输和贮存。 本标准适用于分别于GB/T 4606规定的50号牵引销、GB/T 4607规定的90号牵引销相连接的牵引座。
Road vehicles-Fifth wheel
- ICS
- 43.080.10
- CCS
- T71
- 发布
- 2006-02-20
- 实施
- 2006-05-01
本标准规定了牵引杆挂车转盘的型号、基本参数系列、技术条件、检验规则、标志、使用说明书、运输和贮存。 本标准适用于最大总质量不大于20000kg的牵引杆挂车使用的转盘（以下简称转盘）。
Draw-bar trailer turntable
- ICS
- 43.080.10
- CCS
- T72
- 发布
- 2006-02-20
- 实施
- 2006-05-01
本标准规定了冷藏保温厢式挂车的术语和定义、技术要求及试验方法。 本标准适用于在道路上使用的冷藏保温厢式挂车。
Technical specification for refrigerated and insulated van trailer
- ICS
- 43.080.10
- CCS
- T70
- 发布
- 2006-02-20
- 实施
- 2006-05-01
LPG equipment and accessories. Equipping of LPG road tankers
- ICS
- 43.080.10
- CCS
- 发布
- 2006-02-17
- 实施
- 2006-02-17
This European Standard specifies equipment and accessories for road tankers used for the transport of Liquefied Petroleum Gas (LPG) and identifies the equipment that is considered necessary to ensure that filling, transportation and discharge operations can be carried out safely. It also specifies the requirements for the assembly of the accessories and the vehicle LPG equipment to the road tanker. This European Standard also identifies additional equipment and accessories that may be used on road tankers carrying LPG. NOTE This European Standard does not preclude the use of alternative designs, materials and equipment testing which provide a similar level of safety. This European Standard does not apply to "tank-containers" and "battery-vehicles" used for the transportation of LPG.
LPG equipment and accessories - Equipping of LPG road tankers
- ICS
- 43.080.10
- CCS
- T58
- 发布
- 2006-02-17
- 实施
- 2006-02-17
This European Standard specifies equipment and accessories for road tankers used for the transport of Liquefied Petroleum Gas (LPG) and identifies the equipment that is considered necessary to ensure that filling, transportation and discharge operations can be carried out safely. It also specifies the requirements for the assembly of the accessories and the vehicle LPG equipment to the road tanker. This European Standard also identifies additional equipment and accessories that may be used on road tankers carrying LPG. NOTE This European Standard does not preclude the use of alternative designs, materials and equipment testing which provide a similar level of safety. This European Standard does not apply to "tank-containers" and "battery-vehicles" used for the transportation of LPG.
LPG equipment and accessories - Equipping of LPG road tankers
- ICS
- 43.080.10
- CCS
- E98
- 发布
- 2006-02-17
- 实施
- 2006-02-17
이 규격은 KS R 9240에 이용하는 탱크의 설계 방법(이하, 설계 방법이라 한다.)에
Design methods for tanks of tank cars
- ICS
- 43.080.10
- CCS
- S50
- 发布
- 2005-12-05
- 实施
- 2005-12-05
Design methods for tanks of tank cars
- ICS
- 43.080.10
- CCS
- 发布
- 2005-12-05
- 实施
Inspection and testing of LPG road tankers.
- ICS
- 43.080.10
- CCS
- T58
- 发布
- 2005-12-01
- 实施
- 2005-12-20
This SAE Standard outlines the requirements for a preformed thermosetting hose intended for use in heavy-duty vehicle engines, such as air cleaner to carburetor hose, where it is exposed to normal heat and splash of motor oil.
General Requirement for Preformed Hoses for Air Induction on Heavy-Duty Engines
- ICS
- 43.080.10
- CCS
- J93
- 发布
- 2005-09-12
- 实施
This specification covers the requirements for motor vehicle models of category N2 and N3, not previously registered or licensed in South Africa, designed or adapted for operation on a public road.
MOTOR VEHICLES OF CATEGORY N2 AND N3
- ICS
- 43.080.10
- CCS
- 发布
- 2005-09-02
- 实施
