43.080.10 卡车和挂车 标准查询与下载

BS ISO 27956:2009 道路车辆.送货车上货物的固定.要求和试验方法

Road vehicles - Securing of cargo in delivery vans - Requirements and test methods

VDI 2700 Blatt 16-2009 固定道路车辆上的负载 固定总重量不超过 7.5 吨的运输车上的负载

This guideline applies to light commercial vehicles up to a permissible gross vehicle weight (GVW) of 7,5 t in accordance with Section 3.1, irrespective of whether they are equipped with a panel body, box body or platform, and also applies to hitched-on trailers. This guideline is intended for the use of consignors, carriers, shippers, vehicle owners, vehicle operators (drivers) and such persons as the law, ordinances, contracts or other codes of practise make responsible for securing the load and for safe transportation. Their areas of responsibility derive from national regulations, statutory provisions and also from the corresponding legislation and regulations in other countries in the case of international transportation and also comply with accepted engineering practice. A comprehensive treatment of every case has to be ruled out on account of not only the wide variety of vehicle types, of auxiliary materials and of their possible combinations in use but also the large number of different load-securing methods. For this reason, means of securing loads which are demonstrably equivalent or which provide better load securing can also be used. The person responsible must ensure that loadsecuring measures are correctly dimensioned, combined and implemented for the specific individual case. Endangerment of individuals or impairment of vehicle driving characteristics must be prevented. Manufacturer's information regarding permitted applications and strengths of the vehicle bodies and also of securing aids for loads must be observed. Information on auxiliary materials and equipment for making up load units, such as stretch film, shrink-wrapping film or strapping tape, will be found in guideline series VDI 3968. This guideline does not apply to transportation by rail, sea or air nor does it apply to combined modes of transportation where special provisions apply; for example, guideline VDI 2700 Part 7 or the cargo securement regulations of Railion Deutschland AG. In such cases, upon transfer to the other carrier, the load may need to be resecured appropriately. The foundations of the present guideline are VDI 2700 and the guideline series VDI 3968.

Securing of loads on road vehicles - Securing of loads on transporter up to a total mass of 7,5 t

SAE J2370-2009 弯曲软管的几何尺寸和公差

To provide the curved hose industry and their customers with a recommended practice for applying GD&T procedures to curved hoses and to provide generic curved hose drawings that represent the application of GD&T to typical curved hose parts. Dimensioning and Tolerancing will be in accordance with ASME Y14.5M.

Geometric Dimensions and Tolerancing for Curved Hose

DS/EN 13083:2009 危险货物运输罐罐 罐罐服务设备 底部装卸适配器

This European Standard covers externally actuated and self actuated adaptors for bottom loading and unloading.This European Standard specifies the performance requirements and the critical dimensions of the adaptor for bottom loading and unloading. It also specifies the tests necessary to verify the compliance of the equipment with this European Standard. The equipment specified by this standard is suitable for use with liquid petroleum products and other dangerous substances of Class 3 of ADR [2] which have a vapour pressure not exceeding 110 kPa at 50 °C and petrol, and which have no subclassification as toxic or corrosive.

Tanks for transport of dangerous goods - Service equipment for tanks - Adaptor for bottom loading and unloading

SAE J1522-2009 卡车司机腹部位置

This SAE Recommended Practice describes two-dimensional 95th percentile truck driver side view, seated stomach contours for horizontally adjustable seats. There is one contour and three locating lines to accommodate male-to- female ratios of 50:50, 75:25 and 90:10 to 95:5.

Truck Driver Stomach Position

VC 8025-2010 N2和N3类机动车的强制性规范

This specification covers the requirements for motor vehicle models of category N2 and N3, not previously registered or licensed in South Africa, designed or adapted for operation on a public road. The requirements of this specification shall, in so far

Compulsory specification for motor vehicles of category N2 and N3

VC 8027-2010 O2类和O3类车辆的强制规范

This specification covers the requirements for vehicles of category O3 and O4 designed or adapted for the conveyance of goods and for operation on a public road, including any category O3 and O4 vehicle not previously registered in South Africa. New vehi

Compulsory specification for vehicles of category O3 and O4

SAE J1853-2008 手动绞车拖船型号

This SAE Standard includes spur gear and direct drive type hand-cranked winches as used on boat trailers. This does not include brake type winches as used in boat lift, davit, or industrial applications.

Hand Winches-Boat Trailer Type

SAE J2343-2008 液化石油气(LNG)中型和重型驱动车辆用推荐实施规程

This SAE Recommended Practice provides guidance for the construction, operation, and maintenance of LNG powered medium, heavy-duty vehicles and all LNG vehicles used for public transit or commercial applications.1.1 PurposeThe purpose of this document is to establish a uniform practice for construction, operation, and maintenance of LNG powered vehicles and is subject to change to keep pace with experience and technical advances. The revised FailureModes and Effects Analysis (FMEA) which influences this document is a separate document, available in part as an informative appendix (Appendix B).

Recommended Practice for LNG Medium and Heavy-Duty Powered Vehicles

DIN EN 12252:2008 液化石油气(LPG)设备和附件.LPG油槽车的装备

This European Standard specifies equipment and accessories for road tankers used for the transport of Liquefied Petroleum Gas (LPG) and identifies the equipment that is considered necessary to ensure that filling, transportation and discharge operations can be carried out safely. It also specifies the requirements for the assembly of the accessories and the vehicle LPG equipment to the road tanker. This European Standard also identifies additional equipment and accessories that may be used on road tankers carrying LPG. NOTE This European Standard does not preclude the use of alternative designs, materials and equipment testing which provide a similar level of safety. This European Standard does not apply to "tank-containers" and "battery-vehicles" used for the transportation of LPG.

LPG equipment and accessories - Equipping of LPG road tankers(includes Amendment A1:2008); English version of DIN EN 12252:2008-06

NF M88-715:2008 液化石油气(LPG)设备和附件.LPG油槽车的装备

LPG equipment and accessories - Equipping of LPG road tankers.

SAE J2807-2008 拖车车辆总重等级和挂车重量等级测定的性能要求

This document establishes minimum performance criteria at GCWR and calculation methodology to determine towvehicle TWR for passenger cars, multipurpose passenger vehicles and trucks. This includes all vehicles up to 16000 lb GVWR. It is recommended that the performance requirements within be adopted for all vehicles with model year designation 2011 or later. This document establishes tow-vehicle performance requirements for combination vehicle acceleration, gradeability, understeer, trailer sway response, braking and park brake at GCWR, and tow-vehicle hitch/attachment structure at TWR. In order to minimize test variations, it provides standard test trailer specifications and requirements for use in these tests. It is acknowledged that there are a wide variety of conditions experienced while trailering which cannot be completely addressed within this document and in no way is this document intended to establish or limit manufacturers' designs or instructions to the customer. This document provides simple equations to determine TWR from GCWR in conjunction with other vehicle ratings and defined vehicle weight conditions and dimensions.

Performance Requirements for Determining Tow-Vehicle Gross Combination Weight Rating and Trailer Weight Rating

VC 8027-2008 O3及O4类机动车辆强制性规范

This specification covers the requirements for vehicles of category O3 and O4 designed or adapted for the conveyance of goods and for operation on a public road, including any category O3 and O4 vehicle not previously registered in South Africa.

Compulsory specification for vehicles of category O3 and O4

DB44/ 460-2007 道路运输液体危险货物罐式车辆金属常压罐体定期检验规则

本标准规定了道路运输液体危险货物罐式车辆金属常压罐体(以下简称罐体)定期检验的总论、检验前的准备、检验内容与要求和检验结论。本标准适用于装运介质为液体危险货物，最高工作压力小于0.1MPa(表压,下同)，金属材料制造且与汽车底盘或半挂车车架为永久性连接的罐体及其附件的定期检验。本标准所称危险货物是指GB 12268中规定的危险化学品。本标准不适用于非金属材料罐体、真空绝热结构罐体或有特殊要求的国防军事装备用罐体。

Road tanker for dangerous liquid goods transporation atmospheric pressure metal tank periodical inspection regulation

SAE J2343-2007 液化天然气(LNG)中型和重型动力汽车的推荐实施规程

This SAE Recommended Practice provides guidance for the construction, operation, and maintenance of LNG powered heavy-duty vehicles and all LNG vehicles used for public transit or commercial applications.. The purpose of this document is to establish a uniform practice for construction, operation, and maintenance of LNG powered vehicles and is subject to change to keep pace with experience and technical advances. The revised Failure Modes and Effect Analysis (FMEA) which influences this document is a separate document, available in part as an informative appendix.

Recommended Practice for LNG Medium and Heavy-Duty Powered Vehicles

JB/T 4783-2007 低温液体汽车罐车

1.1 本标准规定了低温液体汽车罐车（以下简称低温罐车）罐体的技术要求、试验方法、检验规则、标志和标识等要求。 1.2 本标准适用于罐体设计压力不小于0.1MPa，容积大于1m的低温罐车，且与定型汽车底盘或半挂车车架永久性连结的真空绝热低温罐车。 1.3 本标准不适用于有色金属或非金属材料的罐体的设计和制造。 1.4 对不能用本标准来进行设计的低温罐车罐体，允许采用以下方法设计，但需经全国锅炉压力容器标准化技术委员会评定、认可。 a）包括有限元法在内的应力分析； b）验证性试验分析（如实验应力分析、验证性液压试验）； c）用可比的已投入使用的结构进行对比经验设计。 1.5 用企业标准来进行设计、制造、试验和检验本产品时，其企业标准的安全技术要求应经全国锅炉压力容器标准化技术委员会的审查。

Road tankers for cryogenic liquid

DS/EN 13317+A1:2007 运输危险货物的罐体 罐体的服务设备 人孔盖组件

This European Standard covers the manhole cover assembly and specifies the performance requirements, dimensions and tests necessary to verify the compliance of the equipment to this standard.The equipment specified by this standard is suitable for use with liquid petroleum products and other dangerous substances of Class 3 of ADR - European Agreement concerning the International Carriage of Dangerous Goods by Road - (flammable liquids) which have a vapour pressure not exceeding 110 kPa at 50 °C including petrol, and which have no sub classification as toxic or corrosive.

Tanks for transport of dangerous goods - Service equipment for tanks - Manhole cover assembly

DS/EN 15207:2007 危险货物运输罐 24 V 标称电源电压危险区域服务设备的插头/插座连接和电源特性

This European Standard specifies the interoperability requirements for the tractor/trailer and/or transport tank/trailer plug/socket for the use in hazardous areas, being:- the connection used for the supply Type A and supply Type S electrical power to service equipment; and- the supply characteristics for each operating mode.This plug/socket combination includes provisions for future connections including data transfer.The plug/socket connection is not used for purposes which are specified in other standards for truck - trailer connections e.g. ISO 12098 and ISO 7638-1.

Tanks for transport of dangerous goods - Plug/socket connection and supply characteristics for service equipment in hazardous areas with 24 V nominal supply voltage

BS EN 12642:2007 道路车辆上货物的安全 工业车辆的车体结构 最小要求

Securing of cargo on road vehicles. Body structure of commercial vehicles. Minimum requirements

BS EN 12642:2006 道路车辆上货物安全性.商用车辆的车体结构.最低要求

This European Standard applies to body structures on commercial vehicles and on trailers with a maximum total weight of more than 3 500 kg. This European Standard sets out basic minimum requirements for standard vehicle bodies (side walls, front and rear walls) and for reinforced vehicle bodies and specifies appropriate tests. This European Standard does not apply to swap bodies, nor to box type vans, i.e. vehicles where the driver cabin and the cargo space form one unit.

Securing of cargo on road vehicles - Body structure of commercial vehicles - Minimum requirements