45.040 铁路工程材料和零件 标准查询与下载
共找到 639 条与 铁路工程材料和零件 相关的标准，共 43 页
Railway applications - Requirements for bogies and running gears
- ICS
- 45.040
- CCS
- 发布
- 2011-07-18
- 实施
- 2011-07-18
Railway applications - Wheelsets and bogies - Method of specifying the structural requirements of bogie frames
- ICS
- 45.040
- CCS
- 发布
- 2011-07-18
- 实施
- 2011-07-18
本标准规定了铁路钢桥保护涂装技术要求、试验方法和检验规则；规定了铁路钢桥各涂装体系防锈底漆、中间层涂料和面漆的产品分类、技术要求、试验方法、检验规则及包装、标志、运输和贮存。 本标准适用于桥梁（包括附属结构）、支座等钢结构的初始涂装、钢桥涂膜劣化后的重新涂装和维护性涂装及涂装使用的防锈底漆、中间漆和面漆。
The protection coating anti-corrosion and specification for the supply of paints for railway steel bridge
- ICS
- 45.040
- CCS
- S05
- 发布
- 2011-07-15
- 实施
- 2012-01-01
本标准规定了铁路桥梁有砟、无砟混凝土桥面有保护层的防水层的原材料、防水层铺设、保护层、质量检查以及保修期要求。 本标准适用于铁路桥梁有砟、无砟混凝土桥面有保护层的防水层。
Technical speecification for waterproof layer of railway concrete bridge
- ICS
- 45.040
- CCS
- S13
- 发布
- 2011-07-15
- 实施
- 2012-01-01
本标准规定了铁路用重型轨道车的车轴型式及基本尺寸。 本标准适用于新设计的轨距为1 435mm、运行速度不大于120km/h的重型轨道车，其他自轮运转特种设备可参照本标准。
Axles for heavy-duty railway cars-types and basic dimensions
- ICS
- 45.040
- CCS
- S23
- 发布
- 2011-07-15
- 实施
- 2012-01-01
本标准规定了铁路混凝土的技术要求、试验方法、配制和施工要求以及质量检验。 本标准适用于铁路工程用混凝土。
Concrete for railway construction
- ICS
- 45.040
- CCS
- S05
- 发布
- 2011-07-15
- 实施
- 2012-01-01
Railway applications - Wheelsets and bogies - Method of specifying the structural requirements of bogie frames.
- ICS
- 45.040
- CCS
- S33
- 发布
- 2011-07-01
- 实施
- 2011-07-22
Railway applications - Wheelsets and bogies - Monobloc Wheels - Technical approval procedure - Part 1 : forged and rolled wheels.
- ICS
- 45.040
- CCS
- S33
- 发布
- 2011-06-01
- 实施
Railway applications - Wheelsets and bogies - Wheels - Product requirements.
- ICS
- 45.040
- CCS
- S33
- 发布
- 2011-06-01
- 实施
- 2011-06-11
Railway applications - Wheelsets and bogies - Monobloc Wheels - Technical approval procedure - Part 1 : forged and rolled wheels.
- ICS
- 45.040
- CCS
- S33
- 发布
- 2011-06-01
- 实施
- 2011-06-11
Railway applications - Wheelsets and bogies - Wheels - Product requirements.
- ICS
- 45.040
- CCS
- S33
- 发布
- 2011-06-01
- 实施
This European Standard consolidates all the separate requirements specified in rolling stock TSLs and European Standards relating to bogies and running gear together into an overall requirement and process that ensures a functional and safe design is achieved for a defined operating envelope. There are many European Standards that specify the design requirements and associated processes of bogie and running gear components and sub-assemblies.There are also European Standards that specify vehicle performance and validation requirements that depend directly on the bogies or running gear.The objective of this standard is to bring all these separate design criteria together.This is accomplished by specifying the design and validation processes to be used for bogies and running gear with particular focus on the two key disciplines of dynamic behaviour and structural integrity.To ensure that safe operation can be continued througnout the product life the definition of a maintenance plan is also required.
Railway applications - Requirements for bogies and running gears; German version EN 15827:2011
- ICS
- 45.040
- CCS
- S33
- 发布
- 2011-06
- 实施
The aim of this European Standard is to define the requirements that a monobloc wheel of a freight of passenger railway vehicle non-powered axle shall meet in order to be able to be used on a European network. For wheels of powered axles or wheels with noise dampers, the requirements may be amended or supplemented. For light vehicles and tramways, other standards or documents accepted by the customer and supplier may be used. This European Standard only applies to wheels of new design. These requirements are intended to assess the validity of the design choice for the proposed use. The assessment of these requirements is the technical approval procedure. This European Standard is applicable to forged and rolled wheels for which the quality requirements are defined in EN 13262.
Railway applications - Wheelsets and bogies - Monobloc wheels - Technical approval procedure - Part 1: Forged and rolled wheels; German version EN 13979-1:2003+A2:2011
- ICS
- 45.040
- CCS
- S33
- 发布
- 2011-06
- 实施
This document specifies the method to be followed to achieve a satisfactory design of bogie frames and includes design procedures, assessment methods, verification and manufacturing quality requirements. It is limited to the structural requirements of bogie frames including bolsters and axlebox housings. For the purpose of this document, these terms are taken to include all functional attachments, e.g. damper brackets.
Railway applications - Wheelsets and bogies - Method of specifying the structural requirements of bogie frames; German version EN 13749:2011
- ICS
- 45.040
- CCS
- S33
- 发布
- 2011-06
- 实施
This European Standard specifies the characteristics of railway wheels for use on European networks. Four steel grades, ER6, ER7, ER8 and ER9 are defined in this standard; for European freight wagon interoperability purposes only grades ER6, ER7 and ER8 are applicable. Certain characteristics are defined according to a category 1 or a category 2. Category 1 is generally chosen when the train speed is higher than 200 km/h. Freight vehicles running at speeds lower than 200 km/h generally use wheels of Category 2. These categories can sometimes be subdivided, depending upon the characteristics. This standard is applicable to solid forged and rolled wheels which are made from vacuum degassed steel and have a chilled rim. They are to have already been used in commercial conditions on a European network in a significant quantity, or to have satisfied a technical approval procedure according to EN 13979-1 for their design.
Railway applications - Wheelsets and bogies - Wheels - Product requirements; German version EN 13262:2004+A2:2011
- ICS
- 45.040
- CCS
- S33
- 发布
- 2011-06
- 实施
TB/T 3260的本部分规定了动车组轧制铝及铝合金板材和带材（以下简称为板、带）的技术要求、试验方法、检验规则和标记、包装、运输、贮存等。 本部分适用于动车组用铝及铝合金板、带。其他轨道车辆可参照执行。
Aluminium and aluminium alloys used on EMU.Part 2: Sheet and strip
- ICS
- 45.040
- CCS
- S05
- 发布
- 2011-05-20
- 实施
- 2011-11-01
TB/T 3260的本部分规定了动车组用铝及铝合金材料的化学成分、可阳极氧化性、焊接性能、特性及适用范围、力学性能、试验方法、检验规则、标记、包装、运输、贮存等要求。 本部分适用于动车组用铝及铝合金板材、带材、棒材、管材和型材。其他轨道车辆可参照执行。
Aluminium and aluminium alloys used on EMU.Part 1: Basic requirement
- ICS
- 45.040
- CCS
- S05
- 发布
- 2011-05-20
- 实施
- 2011-11-01
TB/T 3260的本部分规定了动车组用铝及铝合金型材的技术要求、试验方法、检验规则和标记、包装、运输、贮存等。 本部分适用于动车组用铝及铝合金挤压型材。其他轨道车辆可参照执行。
Aluminium and aluminium alloys used on EMU.Part 4: Profiles
- ICS
- 45.040
- CCS
- S05
- 发布
- 2011-05-20
- 实施
- 2011-11-01
TB/T 3260的本部分规定了动车组用铝及铝合金棒材和管材的技术要求、试验方法、检验规则和标记、包装、运输、贮存等。 本部分适用于动车组用铝及铝合金挤压棒材和有缝管材。其他轨道车辆可参照执行。
Aluminium and aluminium alloys used on EMU.Part 3: Rod/bar and tube
- ICS
- 45.040
- CCS
- S05
- 发布
- 2011-05-20
- 实施
- 2011-11-01
This European Standard specifies the method to be followed to achieve a satisfactory design of bogie frames and includes design procedures, assessment methods, verification and manufacturing quality requirements. It is limited to the structural requirements of bogie frames including bolsters and axlebox housings. For the purpose of this European Standard, these terms are taken to include all functional attachments, e.g. damper brackets.
Railway applications. Wheelsets and bogies. Method of specifying the structural requirements of bogie frames
- ICS
- 45.040
- CCS
- S33
- 发布
- 2011-04-30
- 实施
- 2011-04-30
