45.040 铁路工程材料和零件 标准查询与下载

TB/T 3201-2015 铁路通信漏泄同轴电缆

本标准规定了铁路通信漏泄同轴电缆（以下简称“电缆”）的产品分类、技术要求、检验方法、检验规则及包装、运输和储存等。 本标准适用于450 MHz和900 MHz频段的铁路无线通信系统用漏泄同轴电缆的设计、制造、检验等。

Leaky coaxial cables for railway communication

15/30270302 DC BS EN 13715 铁路应用 轮组和转向架 轮子 胎面轮廓

BS EN 13715. Railway applications. Wheelsets and bogies. Wheels. Tread profile

DIN EN 16185-1:2015 铁路应用 多单元列车的制动系统 第1部分：要求和定义；德文版 EN 16185-1:2014

Railway applications - Braking systems of multiple unit trains - Part 1: Requirements and definitions; German version EN 16185-1:2014

DIN EN 16185-2:2015 铁路应用 多单元列车的制动系统 第2部分：试验方法；德文版 EN 16185-2:2014

Railway applications - Braking systems of multiple unit trains - Part 2: Test methods; German version EN 16185-2:2014

BS EN 16185-1:2014 铁路应用 动车组列车的刹车系统 第1部分：要求及定义

Railway applications. Braking systems of multiple unit trains. Requirements and definitions

BS EN 16185-2:2014 铁路应用 动车组列车的刹车系统 第2部分：测试方法

Railway applications. Braking systems of multiple unit trains. Test methods

GOST 33463.7-2015 铁路车辆上的生命支持系统. 第7部分. 用于测定工效学参数的试验方法

Life support systems for railway rolling stock. Part 7. Test methods for determination of ergonomic parametrs

GOST 33463.4-2015 铁路车辆的生命支持系统. 第4部分. 用于测定人工照明指标的试验方法

Life-support systems for railway rolling stock. Part 4. Test methods for determiation of indices of the artificial lighting

ASTM A729/A729M-15e1 货物运输和电气铁路用热处理碳和合金钢轴的标准实施规程

1.1 This specification covers heat-treated carbon and alloy steel axles for mass transit and commuter cars in electric and locomotive hauled railway service. 1.2 This specification is for solid design roller bearing axles with machined bodies. 1.3 Various axle designs are used for this service including motor and non-motor with either inboard or outboard journals. 1.4 Supplementary requirements including those in the general requirements of Specification A788/A788M are provided for use when additional testing or inspection is desired. These shall apply only when specified individually by the purchaser in the order. 1.5 Unless the order specifies the applicable “M” specification designation, the axles shall be furnished to the inch-pound units. 1.6 The values stated in either SI units or inch-pound units are to be regarded separately as standard. The values stated in each system may not be exact equivalents; therefore, each system shall be used independently of the other. Combining values from the two systems may result in non-conformance with the standard.

Standard Specification for Carbon and Alloy Steel Axles, Heat-Treated, for Mass Transit and Electric Railway Service

EN 16185-2:2014 铁路应用.动车组列车的刹车系统.第2部分:测试方法

This European Standard specifies test methods and acceptance criteria for a brake system for use in self propelling thermal and electric trains, in the following document called EMU/DMU, operating on routes of the European conventional rail system network. This European Standard is applicable to: - all new vehicles designs of self-propelling thermal and electric trains; - all major overhauls of the EMU/DMU if they involve redesigning or extensive alteration to the brake system of the vehicle concerned. This European Standard does not cover; - locomotive hauled trains which are specified by EN 14198; - mass transit rolling stock which is specified by EN 13452 (all parts); - high speed trains being operated at speeds greater than 200 km/h which are specified by EN 15734-1 and tests in EN 15734-2. The functional testing requirements set out in this European Standard assume the vehicles are fitted with brake system architecture as defined in EN 16185-1. The braking performance obtained by applying the tests defined in this European Standard can be used to assess compliance with the required braking performance as defined in EN 16185-1.

Railway applications - Braking systems of multiple unit trains - Part 2: Test methods

EN 16185-1:2014 铁路应用.动车组列车的刹车系统.第1部分:要求及定义

This European Standard describes the functionality, constraints, performance and operation of a brake system for use in self propelling thermal and electric trains operating on routes of the European conventional rail system network. This European Standard covers: - all new vehicle designs of self-propelling thermal and electric trains being operated at a maximum speed up to 200 km/h, in the following text simply called EMU/DMU; - all major overhauls of the above-mentioned vehicles if they involve redesigning or extensive alteration to the brake system of the vehicle concerned. This standard does not cover; - locomotive hauled trains which are specified by EN 14198; - mass transit rolling stock which is specified by EN 13452-1; - high speed trains being operated at speeds greater than 200 km/h which are specified by EN 15734-1.

Railway applications - Braking systems of multiple unit trains - Part 1: Requirements and definitions

BS 5892-7:2014 铁路车辆材料. 铸轮的产品规格和技术验收要求

This British Standard specifies the characteristics of,and technical approval requirements for,cast railway wheels for conventional rail operation. It can be applied in conjunction with BS or BS EN standards for axles and wheelsets. This standard is not applicable to urban rail.

Railway rolling stock materials. Specification for product and technical approval requirements for cast wheels

TB/T 3356-2014 预应力中空锚杆

本标准规定了铁路工程预应力中空锚杆的术语，标记与规格，技术要求，检验方法，检验规则，标志、包装和贮存。本标准适用于铁路工程中使用的预应力中空锚杆。

Prestressed anchor bolt with hollow bar

TB/T 3353-2014 铁路隧道钢筋混凝土管片

本标准规定了铁路隧道预制钢筋混凝土衬砌管片(以下简称管片)的术语和定义、分类与标记、原材料、制作要求、技术要求、检验方法、检验规则、标志与出厂质量证明书、贮存与运输。本标准适用于铁路隧道工程掘进机法、盾构法施工用钢筋混凝土衬砌管片。

Reinforced concrete segments for railway tunnel

TB/T 3354-2014 铁路隧道排水板

本标准规定了铁路隧道排水板的分类和标记，技术要求，检验方法，检验规则，合格证、包装、运输和贮存。 本标准适用于铁路隧道工程用排水板。

Railway tunnel drainage board

NF F14-005:2014 铁路车辆. 铁路车辆信号设备. 可移动信号. 整体信号

Le présent document définit le volume d'encombrement, à l'intérieur duquel doivent s'inscrire les signaux amovibles d'extrémité, destinés à la signalisation amovible des trains. Il fixe, en outre, les dimensions du crochet de maintien des signaux dans les portes-signal.

Railway rolling stock - Signalling equipment for rail vehicles - Removable signalling - Overall signal

TB/T 3350.1-2014 动车组用不锈钢第1部分:钢板及钢带

TB/T 3350的本部分规定了动车组车体结构用冷轧不锈钢板及钢带的术语和定义,技术要求,尺寸、外形、重量及允许偏差,检验方法,检验规则,标记,订货内容,标志、包装与质量证明书。本部分适用于动车组车体结构用冷轧宽钢带及其卷切定尺钢板、冷轧纵剪宽钢带及其卷切定尺钢带、冷轧窄钢带及其卷切定尺钢带,也适用于单张轧制的钢板。其他轨道车辆用不锈钢或其他牌号不锈钢可参考使用。

Stainless steel used on EMU.Part1:Palate and strip of stainless steel

TB/T 3350.2-2014 动车组用不锈钢第2部分:管材

TB/T 3350的本部分规定了动车组用不锈钢管材(以下简称钢管)的分类和代号,技术要求,尺寸、外形及重量,检验方法,检验规则,标记,订货内容,标志、包装及质量证明书。本部分适用于动车组用不锈钢管材,其他轨道车辆用不锈钢管材可参考使用。

Stainless steel used on EMU.Part 2:Tube

TB/T 3350.4-2014 动车组用不锈钢第4部分:冷弯型钢

TB/T 3350的本部分规定了动车组用不锈钢冷弯型钢的术语和定义,分类和代号,技术要求,检验方法,检验规则,订货内容,标志、包装和质量证明书。本部分适用于动车组用不锈钢冷弯型钢,其他轨道车辆用不锈钢冷弯型钢可参考使用。

Stainless steel used on EMU.Part 4:Cold forming sectional steel

TB/T 3350.3-2014 动车组用不锈钢第3部分:棒材

TB/T 3350的本部分规定了动车组用不锈钢棒材(以下简称钢棒)的术语和定义,分类和代号,技术要求,尺寸、外形、重量及允许偏差,检验方法,检验规则,标记,订货内容,标志、包装和质量证明书。本部分适用于动车组用不锈钢棒材(包括二次锻制外的热加工或冷加工的圆钢、方钢、六角钢、冷轧和挤压型材)。其他轨道车辆用不锈钢棒材可参考使用。

Stainless steel used on EMU.Part 3:Rod/Bar