共找到 663 条与 钢轨和线路构件 相关的标准,共 45 页
Specification for dimensional properties and associated tolerances of railway rails
Railway applications - Track - Test methods for fastening systems - Part 1 : determination of longitudinal rail restraint
La présente Norme européenne prescrit une méthode d'essai en laboratoire permettant l'application de cycles répétitifs de déplacements, représentatifs des déplacements provoqués par les circulations sur une voie. Elle est utilisée pour l'estimation des performances à long terme des systèmes de fixation directs.
Railway applications - Track - Test methods for fastening systems - Part 4 : effect of repeated loading
La présente partie de l'EN 13146 spécifie un mode opératoire d'essai en laboratoire permettant de déterminer :a) la force longitudinale maximale pouvant être appliquée à un rail fixé à une traverse, un support ou un élément de voie sur dalle au moyen d'un système de fixation, sans qu'il se produise un déplacement irréversible du rail ;b) la raideur longitudinale à un déplacement longitudinal spécifié d'une éprouvette de rail enrobé au moyen d'un système de fixation adhésif.
Railway applications - Track - Test methods for fastening systems - Part 1 : determination of longitudinal rail restraint
Ferro-concrete cross ties for railways. General specifications
System of development and launching into manufacture. Railway infrastructure equipment. Procedure of development, launching into manufacture and tolerance for use
Connections and crossings of railway tracks. Specifications
本标准规定了标准轨距铁路道岔的技术要求、厂内组装、检验方法、检验规则和标志、包装及储运。本标准适用于标准轨距铁路旅客列车直向容许通过速度不大于200 km/h,以及货物列车直向容许通过速度不大于120 km/h的各类道岔、交叉(以下简称道岔)。
Technical specification on turnouts for standard-gauge railway
本标准规定了有砟轨道预应力混凝土岔枕的技术要求、检验方法、检验规则、标志及储运。本标准适用于有砟轨道预应力混凝土岔枕(以下简称为岔枕)。
Concrete turnout sleeper for ballasted track
本部分规定了运行速度250 km/h~350 km/h高速铁路正线道岔(以下简称道岔)制造技术要求、组装技术要求、检验方法、检验规则以及标志、包装、质量证明文件、储存和运输。本部分适用于高速铁路正线道岔。
Technical specification for manufacturing of high speed turnouts.Part 1: Manufacturing and assembly
本部分规定了T型螺栓的技术要求、检验方法、检验规则以及标志和包装。本部分适用于高速铁路道岔扣件用T型螺栓(以下简称螺检)。
Technical specification for manufacturing of high speed turnouts.Part 2: T-bolts
本部分规定了调高垫板的技术要求、检验方法、检验规则及标志、包装和储存运输。本部分适用于高速铁路道岔扣件用调高垫板(以下简称垫板)。
Technical specification for manufacturing of high speed turnouts.Part 9: Height adjustment plates
本部分规定了缓冲调距块的技术要求、检验方法、检验规则及标志、包装和储存运输。本部分适用于高速铁路道岔扣件用缓冲调距块。
Technical specification for manufacturing of high speed turnouts.Part 6: Buffer gauge blocks
本部分规定了预埋塑料套管的技术要求、检验方法、检验规则及标志、包装和储存运输。本部分适用于高速铁路道岔扣件用预埋塑料套管(以下简称套管)。
Technical specification for manufacturing of high speed turnouts.Part 7: Embeded plastic dowels
本部分规定了弹性铁垫板的技术要求、检验方法、检验规则、标志、包装和储存运输。本部分适用于高速铁路道岔扣件用弹性铁垫板。
Technical specification for manufacturing of high speed turnouts.Part 8: Elastic iron plates
本部分规定了轨距块的技术要求、检验方法、检验规则以及标志、包装和储存运输。本部分适用于高速铁路道岔扣件用普通轨距块和绝缘轨距块。
Technical specification for manufacturing of high speed turnouts.Part 4: Gauge blocks
本部分规定了垫板螺栓的技术要求、检验方法、检验规则以及标志和包装。本部分适用于高速铁路道岔扣件用垫板螺栓(以下简称螺栓>。
Technical specification for manufacturing of high speed turnouts.Part 3: Bolts for fixation of plates
本部分规定了盖板的技术要求、检验方法、检验规则及标志、包装和储存运输。本部分适用于高速铁路道岔扣件用盖板。
Technical specification for manufacturing of high speed turnouts.Part 5: Cover plates
Copyright ©2007-2022 ANTPEDIA, All Rights Reserved
京ICP备07018254号 京公网安备1101085018 电信与信息服务业务经营许可证:京ICP证110310号