47.020.20 船用发动机和推进系统 标准查询与下载

23/30456518 DC BS ISO 10665 船舶和海洋技术 船舶设计 CNG 和 LNG 推进系统

BS ISO 10665 Ships and marine technology - Ship design - CNG and LNG propulsion system

ISO/DIS 10665:2023 船舶和海洋技术 船舶设计 CNG 和 LNG 推进系统

Ships and marine technology — Ship design — CNG and LNG propulsion system

KS V ISO 13613-2023 船舶和海洋技术.减少关键推进系统损耗的维护和试验

Ships and marine technology — Maintenance and testing to reduce losses in critical systems for propulsion

ASTM F1309-23 将轴承座安装到船用机械基础上的安装程序的标准实施规程

1.1  This practice covers the acceptable methods of fitting chocks to marine machinery foundations. 1.2  The values stated in SI units shall be regarded as standard. The values in parentheses are for information only. 1.3  This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use. 1.4  This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

Standard Practice for Installation Procedures for Fitting Chocks to Marine Machinery Foundations

ISO 4679:2023 船舶和航海技术 喷水推进系统水力性能试验

Ships and marine technology — Hydraulic performance tests for waterjet propulsion system

ISO/CD 10665:2023 CNG 和 LNG 设备及配件 用于船舶和船舶的 CNG 和 LNG 推进系统

CNG and LNG equipment and accessories — CNG and LNG propulsion system for ships and craft

T/SZBX 107-2023 汽油舷外机

本文件规定了汽油舷外机（以下简称舷外机）的术语和定义、组成与分类、要求、试验方法、检验规则及标志、包装、运输和贮存等内容。

Gasoline outboard engine

ASTM F2798-09(2023) 船用带通油马达的无密封润滑油泵的标准规范

1.1 This specification defines the requirements applicable to design, construction and testing of sealless, rotary positive displacement pumps with oil-through motors for ship lubricating oil service. The complete pump and motor assembly is referred to as canned lube oil pump (CLP). This specification applies to CLPs pumping oil with a SAE rating of 20–50. 1.2 The values stated in inch-pound units are to be regarded as standard. No other units of measurement are included in this standard. 1.3 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use. 1.4 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

Standard Specification for Sealless Lube Oil Pump with Oil Through Motor for Marine Applications

CB/T 4529-2023 船舶推进轴系回旋振动计算方法

本文件适用于船舶推进轴系回旋振动的理论计算

Calculation method of whirling vibration of ship propulsion shafting

CB/T 4530-2023 船舶柴油机轴系纵振计算

本文件适用于船舶柴油机推进轴系纵向振动的理论计算。燃气轮机、电力推进等其它型式的轴系纵向振动计算可参照执行

Calculation of Longitudinal Vibration of Marine Diesel Engine Shafting

T/CANSI 104-2023 定距桨侧向推进器装置

本文件规定了船用固定螺距螺旋桨侧向推进器装置（以下简称定距桨侧推器）的分类、要求、试验方法、检验规则、标志、包装、运输和贮存。

Fixed pitch propeller side thruster equipment

T/CANSI 105-2023 全回转舵桨装置

本文件规定了船用全回转舵桨装置的分类、要求、试验方法、检验规则、标志、包装、运输和贮存。

Azimuth thruster

T/ZHUSA 002-2023 无人水面艇动力系统维护与保养规范

规定了无人水面艇（以下简称“无人艇”）的动力系统组成、动力系统相关设备常见故障处理与保养要求。适用于无人艇艇长大于等于5m但小于20m的无人艇动力系统维护与保养。超过该尺度范围的无人艇可参照本文件执行。

Specifications for Maintenance and Maintenance of Unmanned Surface Vehicle Power System

BS ISO 23453:2022 船舶和海洋技术 定距船用螺旋桨带翅片轮毂盖设计和制造指南

1   Scope This document provides general guidelines for design and manufacture of a hub vortex energy-saving device for a fixed-pitch marine propeller. This document can also apply to the design and manufacture of hub vortex energy-saving device for other types of marine propellers. According to the specific geometrical shape of the propeller and other specifications, it is suggested that hub cap with fins is used in merchant ships.

Ships and marine technology. Guidelines for the design and manufacture of the hub cap with fins for a fixed-pitch marine propeller

ISO 23453:2022 船舶和海上技术.固定螺距船用螺旋桨带翼片的轮毂盖的设计和制造指南

This document provides general guidelines for design and manufacture of a hub vortex energy-saving device for a fixed-pitch marine propeller. This document can also apply to the design and manufacture of hub vortex energy-saving device for other types of marine propellers. According to the specific geometrical shape of the propeller and other specifications, it is suggested that hub cap with fins is used in merchant ships.

Ships and marine technology — Guidelines for the design and manufacture of the hub cap with fins for a fixed-pitch marine propeller

KS V 0057-2022 游船？词汇？乐器

Pleasure boat ? Vocabulary?Instruments

KS V 0928-2022 船用不燃性试验方法

Method of non-combustibility test for marine use

KS V ISO 18770-2022 机械空间燃油系统 防止燃油泄漏

Machinery-space flammable oil systems－Prevention of leakage of flammable oil

T/CANSI 26-2022 电动船舶用锂离子动力蓄电池包电性能试验方法

本文件规定了电动船舶用锂离子动力蓄电池包的通用测试条件、基本性能试验方法检验规则。

Electrical ship’s lithium-ion traction battery pack electrical performance test methods

ASTM F2876-22 船用危险场所用内燃机组件的热额定值和安装的标准实施规程

1.1 This practice covers the method of testing, rating and installation of internal combustion engine packages for use in hazardous areas in marine applications. The thermal rating of the engine is determined by the actual readings of engine and exhaust system temperatures within hazardous areas, as defined by references in Section 2 of this practice, or as designated by the authority having jurisdiction, or both. The goal of this practice is to thermally rate engine packages, and provide additional installation recommendations, in order to reduce the risk of igniting the ignitable mixtures that may be present within the hazardous areas of marine vessels. 1.2 Only a marine engine suitable for the service, designed and constructed in conformance with the requirements of 3.1.2, is considered. 1.3 The system of units in this practice shall be SI (metric) form, along with the standard (English) system equivalent placed in parentheses, for example, 20 °C (68 °F). 1.4 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use.This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use. 1.5 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

Standard Practice for Thermal Rating and Installation of Internal Combustion Engine Packages for use in Hazardous Locations in Marine Applications