47.020.99 有关造船和海上构筑物的其他标准 标准查询与下载

ISO 17325-3:2018 船舶和海洋技术.海洋环境保护.油栅.第3部分:端部连接器

This document specifies the requirements for the design of end connectors of oil booms used for the prevention of spreading of oil spills on water. These criteria are intended to define minimum mating characteristics and are not intended to be restricted to a specific configuration. It should be considered that different types of connectors are preferably used in different areas. This document does not define any priority. It remains the responsibility of manufacturers and users to select the right connector for the intended application. Stability features of boom connectors are the result of interaction between bodies of booms and connectors. This document does not purport to address all safety concerns, if any, associated with its use. However, it is the responsibility of the user of this document to establish the appropriate safety and health procedures, and to determine the applicability of regulatory limitations.

Ships and marine technology — Marine environment protection — Oil booms — Part 3: End connectors

ISO 18079-3:2018 船舶和海上技术.充气救生设备的维修.第3部分:充气救生衣

This document, in conjunction with ISO 18079-1, provides provisions for servicing stations conducting servicing of inflatable lifejackets, including, but not limited to, those subject toISOLAS III/20.8.

Ships and marine technology - Servicing of inflatable life-saving appliances - Part 3: Inflatable lifejackets

JT/T 164.1-2018 绞吸挖泥船专用设备修理技术要求 第1部分: 绞刀

Technical requirements for repair of special equipment for cutter suction dredgers Part 1: Reamer

JT/T 1216-2018 挖泥船泥泵安装要求

Dredger mud pump installation requirements

JT/T 1217-2018 自浮橡胶排泥管

本标准规定了自浮橡胶排泥管的结构、规格与尺寸、技术要求、试验方法、检验规则，以及标志、包装、运输和储存等要求。 本标准适用于输送海水、淡水和淤泥、黏土、沙的混合物的自浮管生产、检验和使用。 本标准不适用于输送砾石、片状风化岩和珊瑚礁的自浮管。

Floating discharge rubber hose

JT/T 1215-2018 锥形泥门

本标准规定了锥形泥门的结构、技术要求、试验方法、检验规则，以及标志、包装、运输和储存等要求。 本标准适用于锥形泥门的生产、检验和使用。

Conical bottom door

SC/T 8154-2018 玻璃纤维增强塑料渔船真空导入成型工艺技术要求

Technical requirements for vacuum introduction molding process of glass fiber reinforced plastic fishing boats

SC/T 8155-2018 玻璃纤维增强塑料渔船船体脱模技术要求

Technical requirements for demoulding of glass fiber reinforced plastic fishing boat hulls

SC/T 8161-2018 渔业船舶铝合金上层建筑施工技术要求

Technical requirements for construction of aluminum alloy superstructures for fishing vessels

SC/T 8156-2018 玻璃钢渔船水密舱壁制作技术要求

Technical requirements for manufacturing watertight bulkheads of fiberglass fishing boats

SC/T 8144-2018 渔船鱼舱玻璃纤维增强塑料内胆制作技术要求

Technical requirements for the production of fiberglass reinforced plastic liner in fish cabins of fishing boats

SC/T 8165-2018 渔船LED水上集鱼灯装置技术要求

Technical requirements for fishing boat LED water gathering light devices

KS V ISO 19030-1-2018(2023) 船舶和海洋技术船体和螺旋桨性能变化的测量第1部分:总则

Ships and marine technology — Measurement of changes in hull and propeller performance — Part 1: General principles

KS V ISO 19030-2-2018(2023) 船舶和海洋技术.船体和螺旋桨性能变化的测量.第2部分:默认方法

Ships and marine technology－Measurement of changes in hull and propeller performance — Part 2: Default method

KS V ISO 19030-1:2018 船舶和船舶技术 - 船体和螺旋桨性能变化的测量 - 第1部分:一般原则

Ships and marine technology — Measurement of changes in hull and propeller performance — Part 1: General principles

KS V 8875-2018(2023) 船舶和海洋用脚手架部件

Scaffolding components for ship''s and marine use

KS V 8874-2018(2023) 船舶和海上设备脚手架的制造和安装说明

Instructions for the manufacture and installation of scaffolding for ships and offshore plants

KS V 8871-2018 燃油净化系统

Fuel oil purifying system

KS V ISO 19030-1-2018 船舶和船舶技术 - 船体和螺旋桨性能变化的测量 - 第1部分:一般原则

Ships and marine technology — Measurement of changes in hull and propeller performance — Part 1: General principles

KS V 8875-2018 船用和海上用脚手架部件

Scaffolding components for ship''s and marine use