47.020.99 有关造船和海上构筑物的其他标准 标准查询与下载

T/GDAQI 040-2020 无人船质量安全风险评价指标体系及评价方法

本标准规定了无人船质量安全风险评价指标体系框架、评价指标和方法。 

Evaluation index system and evaluation method of unmanned ship quality safety risk

T/GDAQI 038-2020 电动无人船操纵性试验方法

本标准规定了用DGPS接收机测试电动无人船操纵性的试验方法。

Test method for maneuverability of electric unmanned ship

ISO 21072-3:2020 船舶和船舶技术 - 海洋环境保护:撇油器的性能测试 - 第3部分:高粘度油

This document specifies a methodology for establishing quantitative performance data for oil skimmers for recovery of oil with high viscosity (above 50000 cP), so the end user can objectively judge, compare and evaluate the design and performance of different skimmers. The methodology applies to testing in a basin and requires control of oil properties and oil slick characteristics. The method is applicable to all types of skimmers provided that the equipment dimensions are within the physical limitations of the test basin. The test procedure provides full-scale test results for the unit tested, under controlled conditions, and for one or more classes of highly viscous oil. Attention is drawn to the care required when applying the test results to predict a realistic skimmer performance under field conditions. For dedicated/in-built systems, the test procedures outlined in this document are only applicable to the skimming device as such, not to the entire skimming system.

Ships and marine technology — Marine environment protection: performance testing of oil skimmers — Part 3: High viscosity oil

ISO 21963:2020 船舶和船舶技术 - 海洋环境保护 - 用于促进固定海上近海结构油水分离的油罐和管道系统

This document provides requirements and test methods for tanks, piping and separation systems facilitating the separation of contaminated fluids of oil and water on fixed offshore marine structures and ships, where treatment is performed by separation systems that optimize oil-water separation to a concentration equal to or less than 5 ppm. It is applicable to fixed offshore marine structures and to ships operating in designated sea areas determined by the relevant authorities.

Ships and marine technology — Marine environment protection — Tanks and piping systems for facilitating 5 ppm oil-water separation

BS ISO 21851:2020 海洋技术 海洋观测系统 海洋水文气象观测系统复用与交互设计标准

What is   ISO 21851   about? ISO 21851   specifies the overall framework of ocean hydro-meteorological observation systems, including the system function composition, the data structure type and data transmission format and protocol, as well as the input and output interface. These systems support automatic measurement of e.g. buoy, submersible, and shore station instruments, with output interfaces, and provide observations on e.g. water temperature, salinity, depth, current, ocean wave, temperature, pressure, humidity, wind, visibility, and precipitation. They have the ability to receive, store, display, process, and analyse data. Who is   ISO 21851   for? ISO 21851   on ocean observation systems is applicable to: Manufactures of ocean observation systems Ocean observers Oceanographers Marine biologists Ocean Authorities and organisations Ocean Research organizations, and oceanology scientists Why should you use   ISO 21851 ?

Marine technology. Ocean observation systems. Design criteria of ocean hydro-meteorological observation systems reuse and interaction

ISO 21851:2020 用于海洋观测的复杂虚拟仪器的标准设计标准

This document specifies the overall framework of ocean hydro-meteorological observation systems, including the system function composition, the data structure type and data transmission format and protocol, as well as the input and output interface. These systems support automatic measurement of e.g. buoy, submersible and shore station instruments, with output interfaces, and provide observations on e.g. water temperature, salinity, depth, current, ocean wave, temperature, pressure, humidity, wind, visibility and precipitation. They have the ability to receive, store, display, process, and analyze data. This document is intended for both developers of ocean observation systems and ocean observers.

Marine technology — Ocean observation systems — Design criteria of ocean hydro-meteorological observation systems reuse and interaction

ISO 21072-2:2020 船舶和海洋技术海洋环境保护撇油器性能试验第2部分:轻、中粘度油

This document specifies a methodology for establishing quantitative performance data for oil skimmers for recovery of oil with light and medium viscosity (up to 50000 cP), so the end user can objectively judge, compare, and evaluate the design and performance of different skimmers. The methodology applies to testing in a basin and requires control of oil properties and oil slick characteristics. The method is applicable to all types of skimmers provided that the equipment dimensions are within the physical limitations of the test basin. The test procedure provides the full-scale test results for the unit tested, under controlled conditions, and for one or more classes of oil. Attention is drawn to the care required when applying the test results to predict skimmer performance under field conditions. For dedicated/in-built systems, the test procedures outlined in this document can only be used for the skimming device as such, not for the entire skimming system.

Ships and marine technology — Marine environment protection: performance testing of oil skimmers — Part 2: Light and medium viscosity oil

T/GDACERCU 0004-2020 导管架海洋平台制造企业绿色供应链管理 指南

本标准规定了导管架海洋平台制造企业绿色供应链管理的目的、范围、要求及绿色供应链管理。

Green supply chain management in jacket offshore platform manufacturing enterprise —Guideline

BS ISO 20661:2020 船舶和海洋技术 绞吸式挖泥船监控系统

What is ISO 20661 about?    ISO 20661 is an International Standard on ships and marine technology that aims to provide optimal functionality and performance of its related equipments and systems.    ISO 20661 specifies the components and structure, general requirements, and subsystem   functional requirements, of cutter suction dredger supervisory and control systems.   ISO 20661 applies only to the installed components, functions, or systems.   

Ships and marine technology. Cutter suction dredger supervisory and control systems

BS ISO 20663:2020 船舶和海洋技术 抓斗式挖泥船监控系统

What is ISO 20663 about?    ISO 20663 specifies the components and structure, general requirements, and subsystem functional requirements, of grab dredger supervisory and control systems (GD-SCS).   ISO 20663 applies only to the installed components, functions, or systems.    ISO 20663 covers the design, manufacture, and modifications.   Who is ISO 20663 for?  

Ships and marine technology. Grab dredger supervisory and control systems

BS ISO 20662:2020 船舶和海洋技术 漏斗式挖泥船监控系统

What is ISO 20662 about?    ISO 20662 specifies the components and structure, general requirements, and subsystem   functional requirements, of trailing suction hopper dredger supervisory and control systems(HD-SCS).   ISO 20662 applies only to the installed components, functions, or systems.    ISO 20662 covers the design, manufacture, and modifications.   Who is ISO 20662 for?   ISO 20662 on hopper dredger supervisory and control systems is applicable to:   Ships an...

Ships and marine technology. Hopper dredger supervisory and control systems

KS V 7751-2020 引航员转移安排的凹陷眼睛

Sunken eyes for pilot transfer arrangements

KS V 7752-2020 海上避难所

Shelter for marine use

T/GDC 41-2020 深海浮式平台天然气加工处理技术规范

生产工艺流程、产品基本参数、设备基本参数要求、质量控制点

Technical specification for deep sea floating platform natural gas processing

ISO 20662:2020 料斗挖泥船监控系统

This document specifies the components and structure, general requirements, and functional requirements of trailing suction hopper dredger supervisory and control systems. It is applicable only to the installed components, functions or systems. It covers design, manufacture and modification.

Ships and marine technology — Hopper dredger supervisory and control systems

ISO 20661:2020 切割机挖泥船监控系统

This document specifies the components and structure, general requirements, and subsystem functional requirements, of cutter suction dredger supervisory and control systems. It is applicable only to the installed components, functions or systems. It covers the design, manufacture and modifications.

Ships and marine technology — Cutter suction dredger supervisory and control systems

ISO 20663:2020 船舶和海洋技术抓斗式挖泥船监控系统

This document specifies the components and structure, general requirements, and functional requirements of grab dredger supervisory and control systems. It is applicable only to the installed components, functions or systems. It covers the design, manufacture and modifications.

Ships and marine technology — Grab dredger supervisory and control systems

T/CANSI 18-2020 双燃料船舶双壁管设计、制作及安装要求

本标准规定了双燃料船舶的双壁管设计、制作和安装要求。

Design, fabrication and installation requirements of double wall pipe for dual fuel ship

T/CANSI 17-2020 A型液货舱LNG船低温传感器选型和安装要求

本标准规定了A型液货舱LNG船低温传感器（以下简称低温传感器）的选型、安装及电缆敷设要求、检验等。

Selection and installation requirements for low temperature sensor of A-type LNG cargo tank

T/CANSI 19-2020 船用真空排放管路布置要求

本标准规定了船用真空排放管路（以下简称真空管路）的布置要求。

Arrangement requirements of marine vacuum discharge piping system