49.025.99 其他材料 标准查询与下载

SAE AS5272D-2011 热固化抗腐蚀的固体膜润滑剂采购规范

This SAE Aerospace Standard (AS) establishes the requirements for heat cured solid film lubricants. For other general or high temperature applications, see AS1701.

Lubricant, Solid Film, Heat Cured, Corrosion Inhibiting, Procurement Specification

BS 3HR 503:2011 螺纹嵌件用镍-铬-钴-钛-铝耐热合金线材(镍基,Cr 19.5,Co 18.0,Ti 2.5,Al 1.5)(直径0.45～2 mm)规格

Specification for nickel-chromium-cobalt-titanium- aluminium heat-resisting alloy wire for thread inserts (Nickel base, Cr 19.5, Co 18.0, Ti 2.5, Al 1.5) (0.45 mm to 2 mm diameter)

BS 2HR 209:2011 镍-铬-钴-钼-钛-铝耐热合金薄板材,带材和板材(镍基,Cr 18,Co 14, Mo 7,Ti 2.2, Al2.1)规范

Specification for nickel-chromium-cobalt-molybdenum- titanium-aluminium heat-resisting alloy plate, sheet and strip (Nickel base, Cr 18, Co 14, Mo 7, Ti 2.2, Al 2.1)

BS 3HR 501:2011 耐热镍铬钴钛铝合金冷拔钢丝弹簧和弹簧(镍基Cr19.5-Co18.0-Ti2.5-Al1.5)规格

Specification for nickel-chromium-cobalt-titanium- aluminium heat-resisting alloy cold drawn wire for springs and springs (Nickel base, Cr 19.5, Co 18.0, Ti 2.5, Al 1.5)

BS 3HR 504:2011 耐热镍铬钛合金棒和合金丝的铆钉规格(最大直径或较小界面尺寸规格20 mm)(镍基Cr19.5-Ti0.4)

Specification for nickel-chromium-titanium heat-resisting alloy bar and wire for rivets and rivets (Maximum diameter or minor sectional dimension 20 mm) (Nickel base, Cr 19.5, Ti 0.4)

BS 3HR 502:2011 耐热镍铬钴钛铝合金冷拔和固溶处理钢丝弹簧和弹簧(镍基Cr19.5-Co18.0-Ti2.5-Al1.5)规格

Specification for nickel-chromium-cobalt-titanium- aluminium heat-resisting alloy cold drawn and solution treated wire for springs and springs (Nickel base, Cr 19.5, Co 18.0, Ti 2.5, Al 1.5)

BS 2HR 240:2011 钴-铬-钨-镍-锰耐热合金板带材(钴基,Cr 20,W 15,Ni 10,Mn 1.5)规范

Specification for cobalt-chromium-tungsten-nickel-manganese heat-resisting alloy plate, sheet and strip (Cobalt base, Cr 20, W 15, Ni 10, Mn 1.5)

SAE AMS4675D-2011 67Ni 30Cu镍铜合金耐蚀条材和锻件

This specification covers a corrosion-resistant nickel-copper alloy in the form of bars, forgings, and forging stock. These products have been used typically for fittings, such as cones, nipples, and unions, in fluid line assemblies using AMS 4574 or AMS 4575 tubing, but usage is not limited to such applications.

Nickel-Copper Alloy, Corrosion-Resistant, Bars and Forgings 67Ni - 30Cu (UNS N04400)

SAE AMS1428G-2010 流体，飞机除冰/防冰，非牛顿（假塑料），SAE II、III 和 IV 类

This specification covers three types of deicing/anti-icing material, each in the form of a non-Newtonian fluid.

Fluid, Aircraft Deicing/Anti-Icing, Non-Newtonian (Pseudoplastic), SAE Types II, III, and IV

SAE AMS7902F-2010 铍片和板材98Be

This specification covers beryllium in the form of sheet and plate produced by hot rolling beryllium block. Sheet: thickness 0.020 to 0.250 inch (0.51 to 6.35 mm), inclusive. Plate: thickness over 0.250 inch (6.35 mm). These products have been used typically for parts requiring high strength-to-weight ratio and high modulus of elasticity, but usage is not limited to such applications.

Beryllium Sheet and Plate 98Be

SAE AMS7904D-2010 高延展性等级的铍制条材,棒材,管材和型材

This specification covers a beryllium in the form of bars, rods, tubing, and machined shapes from vacuum hot pressed powder. These products have been used typically for parts requiring a combination of high strength-to-weight ratio, high modulus of elasticity, and high ductility, but usage is not limited to such applications.

Beryllium Bars, Rods, Tubing, and Shapes High Ductility Grade

SAE AMS7907C-2010 铍栏杆的棒型管状仪表级

This specification covers a beryllium in the form of bars, rods, tubing, and machined shapes from vacuum hot pressed powder. These products have been used typically for parts requiring a combination of high strength-to-weight ratio, high modulus of elasticity, excellent dimensional stability, and minimum guaranteed micro-yield strength, but usage is not limited to such applications.

Beryllium Bars, Rods, Tubing, and Shapes Instrument Grade

SAE AMS7906C-2010 铍条,杆材,管子与型材的标准等级

This specification covers a beryllium in the form of bars, rods, tubing, and machined shapes from vacuum hot pressed powder. These materials have been used typically for parts requiring a combination of high strength-to-weight ratio and high modulus of elasticity, but usage is not limited to such applications.

Beryllium Bars, Rods, Tubing, and Shapes Standard Grade

SAE AMS7910C-2010 冷等静压和烧结的预成型标准级近净铍

This specification covers beryllium in the form of bar, rod, tubing, and shapes from beryllium powder consolidated by cold isostatic pressing (CIP) and sintering. These products have been used typically for parts requiring high strength-to-weight ratio and high modulus of elasticity, but usage is not limited to such applications.

Beryllium Near-Net Preforms Standard Grade Cold Isostatic Pressed, Sintered

SAE AMS4530H-2010 98Cu 1.9Be, 溶解热处理(TB00)铜-铍合金片,带材和板材

This specification covers one type of copper-beryllium alloy in the form of sheet, strip, and plate. The product has been used typically for parts requiring high strength with good electrical conductivity or lack of magnetic susceptibility, but usage is not limited to such applications.

Copper-Beryllium Alloy Sheet, Strip, and Plate, 98Cu 1.9Be, Solution Heat Treated (TB00)

BS 2HR 505:2010 螺套用不超过2 mm的耐热镍铬铁钛铌铝合金圆导线规范(镍基Cr15.5-Fe7.0-Ti2.5-Nb/Ta0.95-Al0.70)

This British Standard specifies requirements for nickel-chromium-irontitanium- niobium-aluminium heat-resisting alloy round wire with a maximum diameter of 2 mm for thread inserts.

Specification for nickel-chromium-iron-titanium-niobium-aluminium heat-resisting alloy round wire with a maximum diameter of 2 mm for thread inserts (nickel base Cr 15.5, Fe 7.0, Ti 2.5, Nb/Ta 0.95, Al 0.70)

BS 4HR 601:2010 紧固件(镍基,Cr 19.5,Ti 2.2,Al 1.4)制造用镍-铬-钛-铝耐热合金棒材和线材(30 mm的最大直径或次小截面尺寸)用规范

This British Standard specifies requirements for nickel-chromiumtitanium- aluminium heat-resisting alloy in the following forms, for the manufacture of fasteners. a) Bar and wire for machining: cold worked and solution treated, designation HR 601A. b) Bar and wire for continuous cold forging or cold extrusion: cold worked and softened, designation HR 601B. c) Bar and wire for hot upset forging: cold worked, designation HR 601C.

Specification for nickel-chromium-titanium-aluminium heat-resisting alloy bar and wire (maximum diameter or minor sectional dimension of 30 mm) for the manufacture of fasteners (nickel base, Cr 19.5, Ti 2.2, Al 1.4)

BS 2HR 506:2010 退火的(镍基,Cr 19.5,Co 1.8,Ti 2.5,Al 1.5)镍-铬-钴-钛-铝耐热合金线材规范

This British Standard specifies requirements for softened nickelchromium- cobalt-titanium-aluminium heat-resisting alloy wire.

Specification for nickel-chromium-cobalt-titanium-aluminium heat-resisting alloy wire: softened (nickel base, Cr 19.5, Co 1.8, Ti 2.5, Al 1.5)

SAE AMS5545F-2010 真空感应和自耗电极熔炼固溶热处理沉淀硬化的含54Ni-19Cr-11Co-9.8Mo-3.2Ti-1.5Al-0.006B耐腐蚀和耐热的镍合金薄板,条材和板材

This specification covers a corrosion and heat resistant nickel alloy in the form of sheet, strip, and plate. These products have been used typically for parts requiring high strength up to 1600 °F (871 °C) and oxidation resistance up to 1800 °F (982 °C), but usage is not limited to such applications.

Nickel Alloy, Corrosion and Heat-Resistant, Sheet, Strip, and Plate 54Ni - 19Cr - 11Co - 9.8Mo - 3.2Ti - 1.5Al - 0.006B Vacuum Induction and Consumable Electrode Melted, Solution Heat Treatable Precipitation Heat Treated (UNS N07041)

SAE AMS1431C-2010 硬跑道和滑行道除冰/防冰用化学试剂

This specification covers a deicing and anti-icing compound in the form of a solid. This compound are intended for use at airports on aircraft maneuvering areas, such as aprons, runways, and taxiways, for the prevention and removal of frozen deposits of snow, frost, and ice..

Compound, Solid Runaway and Taxiway Deicing/Anti-Icing