49.025.99 其他材料 标准查询与下载

SAE AMS4376H-2011 含3.0Al-1.0Zn-0.20Mn(AZ31B-H26)冷轧和局部退火的镁合金板材

This specification covers a magnesium alloy in the form of plate. This product has been used typically for moderate-strength parts requiring rigidity with low density, but usage is not restricted to such applications.

Plate, Magnesium Alloy 3.0Al 1.0Zn 0.20Mn (AZ31B-H26) Cold Rolled and Partially Annealed

SAE AMS2774C-2011 热处理镍合金和钴合金锻件

This specification specifies the engineering requirements for heat treatment, by part fabricators (users) or their vendors or subcontractors, of parts made of wrought nickel or cobalt alloys, of raw materials during fabrication, and of fabricated assemblies in which wrought nickel or cobalt alloys are the primary structural components.

Heat Treatment Wrought Nickel Alloy and Cobalt Alloy Parts

SAE AMS4443G-2011 析出热处理的含4.5Zn-0.75Zr(ZK51A-T5)的镁合金砂模铸件

This specification covers a magnesium alloy in the form of sand castings. These castings have been used typically for parts requiring a combination of good yield strength and elongation, but usage is not limited to such applications.

Magnesium Alloy, Sand Castings, 4.5Zn 0.75Zr (ZK51A-T5) Precipitation Heat Treated

SAE AMS4532H-2011 含98Cu-1.9Be的半硬(TD02)铜铍合金薄板,带材和板材

This specification covers one type of copper-beryllium alloy in the form of sheet and strip. This product has been used typically for parts requiring high strength with good electrical conductivity of lack of magnetic susceptibility, but usage is not limited to such applications. These products have higher strength and lower ductility than AMS 4530.

Copper-Beryllium Alloy, Sheet and Strip, 98Cu 1.9Be, Half Hard (TD02)

SAE AMS4530J-2011 固溶热处理(TB00)的含98Cu-1.9Be铍铜合金薄板,带材和板材

This specification covers one type of copper-beryllium alloy in the form of sheet, strip, and plate. The product has been used typically for parts requiring high strength with good electrical conductivity or lack of magnetic susceptibility, but usage is not limited to such applications.

Copper-Beryllium Alloy Sheet, Strip, and Plate, 98Cu 1.9Be, Solution Heat Treated (TB00)

SAE AMS4453E-2011 固溶和析出热处理9.0Al-2.0Zn(AZ92A-T6)镁合金熔模精密铸件

This specification covers a magnesium alloy in the form of investment castings. These castings have been used typically for intricate parts cast to approximate final dimensions, but usage is not limited to such applications.

Magnesium Alloy, Investment Castings 9.0Al 2.0Zn (AZ92A-T6) Solution and Precipitation Heat Treated

SAE AMS4434M-2011 9.0Al-2.0Zn (AZ92-T6)固溶和析出热处理砂模镁合金铸件

This specification covers a magnesium alloy in the form of sand castings. These castings have been used typically for parts operating in service up to 300 °F (149 °C), but usage is not limited to such application.

Magnesium Alloy Castings, Sand, 9.0Al 2.0Zn (AZ92-T6) Solution and Precipitation Heat Treated

SAE AMS5846C-2011 采用双真空熔融,溶解,稳定化及沉淀热处理工艺制备的53Ni-15Cr-18.5Co-5.0Mo-3.2Ti-4.2Al-0.03B防腐耐热合金棒材和锻件

This specification covers a corrosion and heat resistant nickel alloy in the form of bars, forgings, and forging stock. These products have been used typically for parts requiring high strength up to 1500 °F (816 °C), but usage is not limited to such applications.

Alloy, Corrosion and Heat Resistant, Bars and Forgings 53Ni 15Cr 18.5Co 5.0Mo 3.2Ti 4.2Al 0.03B, Double Vacuum Melted, Solution, Stabilization, and Precipitation Heat Treated

SAE AMS5540N-2011 74Ni-15.5Cr-8.0Fe退火防腐抗热镍合金薄板,带材及厚板

This specification covers a corrosion and heat resistant nickel alloy in the form of sheet, strip, and plate. These products have been used typically for parts requiring oxidation resistance up to 2000 °F (1093 °C), but useful at the higher temperatures only when stresses are low, and where such parts may require welding during fabrication, but usage is not limited to such applications. Strength at elevated temperatures is similar to that of 18-8 type steel.

Nickel Alloy, Corrosion and Heat Resistant, Sheet, Strip, and Plate 74Ni 15.5Cr 8.0Fe, Annealed

SAE AMS2371J-2011 质量保证取样和测试腐蚀和耐热钢和合金锻造产品和锻坯

This specification covers quality assurance sampling and testing procedures used to determine conformance to applicable specification requirements of wrought corrosion and heat resistant steel and alloy products and forging stock. Attributes include in detail herein are: Composition, tensile properties, macrostructure, and micro-inclusion rating. Other requirements are included in Table 2. Quality assurance sampling and testing procedures for forgings are covered in SAE AMS 2374.

Quality Assurance Sampling and Testing Corrosion and Heat-Resistant Steels and Alloys Wrought Products and Forging Stock

SAE AMS2370K-2011 质量保证取样和检测碳低合金钢锻造产品和锻坯

This specification covers quality assurance sampling and testing procedures used to determine conformance to applicable specification requirements of wrought carbon and low-alloy steel products and forging stock. Attributes included in detail herein are: Composition, tensile properties, macrostructure, and micro-inclusion rating. Other requirements are included in Table 2. Quality assurance sampling and testing procedures for forgings are covered in SAE AMS 2372.

Quality Assurance Sampling and Testing Carbon and Low-Alloy Steel Wrought Products and Forging Stock

SAE AMS2372F-2011 质量保证取样和测试,碳钢和低合金钢钢锻件

This specification covers quality assurance sampling and testing procedures used to determine conformance to applicable specification requirements of carbon and low-alloy steel forgings. Quality assurance sampling and testing procedures for forging stock are covered by AMS 2370.

Quality Assurance Sampling and Testing, Carbon and Low-Alloy Steel Forgings

SAE AMS4417B-2011 经过溶解和沉淀热处理1.5Ag 2.1Di 0.08Cu 0.70Zr(EQ21-T6)的铸件,沙和镁合金

This specification covers a magnesium alloy in the form of sand castings. These casting have been used typically for parts requiring retention of yield strength up to 400°F (204°C), but usage is not limited to such applications.

Castings, Sand, Magnesium Alloy, 1.5Ag 2.1Di 0.08Cu 0.70Zr (EQ21-T6) Solution and Precipitation Heat Treated

SAE AS5272E-2011 抗腐蚀加热固化固体薄膜润滑剂采购规格

This SAE Aerospace Standard (AS) establishes the requirements for heat cured solid film lubricants. For other general or high temperature applications, see AS1701.

Lubricant, Solid Film, Heat Cured, Corrosion Inhibiting, Procurement Specification

SAE AMS5387E-2011 60Co 29Cr 4.5W耐蚀和耐热合金熔模铸件

This specification covers a corrosion and heat resistant cobalt alloy in the form of investment of casting. These castings have been used typically for parts, such as nozzles, rubbing seals, rollers, guides, and supports requiring wear and/or erosion resistance in combination with corrosion and oxidation resistance for use up to 1600mDF (870 °C), but usage is not limited to such applications.

Alloy, Corrosion and Heat Resistant, Investment Castings 60Co 29Cr 4.5W As Cast

SAE AMS4490J-2011 铸态9.0Al 0.70Zn(AZ91D,F回火)拉模镁合金铸件

This specification covers a magnesium alloy in the form of die castings. These castings have been used typically for applications where light weight, near net shape components are desired without a need for high strength, or soundness, but usage is not limited to such applications.

Magnesium Alloy Castings, Die, 9.0Al 0.70Zn (AZ91D, Temper F), As Cast

SAE AMS4375L-2011 退火和再结晶镁合金3.0Al 1.0Zn 0.20Mn (AZ31B-0)薄片和板

This specification covers a magnesium alloy in the form of sheet and plate. This product has been used typically for low-strength parts requiring rigidity with low density, but usage is not limited to such applications.

Sheet and Plate, Magnesium Alloy 3.0Al - 1.0Zn - 0.20Mn (AZ31B-0) Annealed and Recrystallized (UNS M11311)

DS/EN 2826:2011 航空航天系列非金属材料在辐射热和火焰影响下的燃烧行为烟气中气体成分的测定

This European Standard defines a test method to determine the concentration of certain gas components due to pyrolitic decomposition of solid materials and composite materials under the influence of radiant heat only or with simultaneous flame application.NOTE 1 The gas components in the smoke are determined according to the specific environmental and test conditions defined in EN 2824 and this standard. No studies have been made up to now to determine whether the results can be transferred to different conditions, particularly to actual fire conditions. The inhalatory toxical risk and irritancy affect cannot be assessed by merely measuring the concentratio

Aerospace series - Burning behaviour of non metallic materials under the influence of radiating heat and flames - Determination of gas components in the smoke

SAE AMS4532G-2011 半硬(TD02)98Cu 1.9Be铜铍合金板材和带材

This specification covers one type of copper-beryllium alloy in the form of sheet and strip. This product has been used typically for parts requiring high strength with good electrical conductivity of lack of magnetic susceptibility, but usage is not limited to such applications. These products have higher strength and lower ductility than AMS 4530.

Copper-Beryllium Alloy, Sheet and Strip, 98Cu 1.9Be, Half Hard (TD02)

SAE AMS7908C-2011 热均衡加压的铍近终焊料预成型标准等级

This specification covers beryllium in the form of bar, rod, tubing, and shapes fabricated from beryllium powder consolidated by hot isostatic pressing (HIP). This product has been used typically for parts requiring high strength-to-weight ratio and high modulus of elasticity, but usage is not limited to such applications.

Beryllium Near-Net Preforms Standard Grade Hot Isostatic Pressed