49.030.20 螺栓、螺钉、螺柱 标准查询与下载

SN EN 2576-2020 航空航天系列 螺栓，MJ 螺纹，耐热钢 FE-PA2601（A286） 等级：900 MPa（在环境温度下）/650℃ 技术规范

Aerospace series - Bolts, MJ threads, in heat resisting steel FE-PA2601 (A286) - Classification: 900 MPa (at ambient temperature)/650° C - Technical specification

PN-EN 2576-2020-10 E 航空航天系列 螺栓，MJ 螺纹，耐热钢 FE-PA2601（A286） 等级：900 MPa（在环境温度下）/650℃ 技术规范

Aerospace series -- Bolts, MJ threads, in heat resisting steel FE-PA2601 (A286) -- Classification: 900 MPa (at ambient temperature)/650 °C -- Technical specification

20/30423237 DC BS EN 4496 航空航天系列 螺钉 100° 沉头普通头 偏置十字槽 紧公差普通柄 短螺纹 钛合金材质 阳极氧化处理 带铝色涂层 分类：1 100 MPa（环境...

BS EN 4496. Aerospace series. Screw, 100° countersunk normal head, offset cruciform recess, close tolerance normal shank, short thread, in titanium alloy, anodized, with aluminium pigmented coating. Classification: 1 100 MPa (at ambient…

BS EN 2576:2020 航空航天系列 螺栓 MJ 螺纹 耐热钢 FE-PA2601 (A286) 分类：900 MPa（环境温度）/650 °C 技术规格

What is BS EN 2576 about?    BS EN 2576 specifies the characteristics, qualification and acceptance requirements for bolts with MJ threads in heat resisting steel FE-PA2601, for aerospace applications.   BS EN 2576 is applicable whenever referenced.   Who is BS EN 2576 for?   BS EN 2576 on heat resisting steel is useful for:    

Aerospace series. Bolts, MJ threads, in heat resisting steel FE-PA2601 (A286). Classification: 900 MPa (at ambient temperature)/650 °C. Technical specification

20/30420306 DC BS EN 2884 航空航天系列 螺钉 盘头 偏置十字槽 粗公差普通柄 短螺纹 钛合金材质 阳极氧化 MoS2 润滑 分类：1 100 MPa（环境温度）/315 °C

BS EN 2884. Aerospace series. Screws, pan head, offset cruciform recess, coarse tolerance normal shank, short thread, in titanium alloy, anodized, MoS2 lubricated. Classification: 1 100 MPa (at ambient temperature)/315 °C

19/30397720 DC BS EN 2884 航空航天系列 螺钉 盘头 偏置十字槽 粗公差普通柄 短螺纹 钛合金材质 阳极氧化 MoS2 润滑 分类：1 100 MPa（环境温度）/315 °C

BS EN 2884. Aerospace series. Screws, pan head, offset cruciform recess, coarse tolerance normal shank, short thread, in titanium alloy, anodized, MoS2 lubricated. Classification: 1 100 MPa (at ambient temperature)/315 °C

20/30386723 DC BS ISO 7689 航空航天 螺栓 MJ 螺纹 合金钢材质 强度等级 1 100 MPa 采购规范

BS ISO 7689. Aerospace. Bolts, with MJ threads, made of alloy steel, strength class 1 100 MPa. Procurement specification

BS EN 4609:2019 航空航天系列 用于螺纹紧固件的螺旋驱动凹槽 几何定义和技术要求

  What is BS EN 4609 - Aerospace series - MORTORQ Spiral Drive Recesses1 about? BS EN 4609 is a European standard on aerospace series that covers spiral drive recesses for threaded fasteners and its geometrical definition and technical requirements. BS EN 4609 specifies dimensions, tolerances, characteristics and qualification requirements for MORTORQ Spiral Drive Recesses1. Who is BS EN 4609 - Aerospace series - MORTORQ Spiral Drive Recesses1 for ? BS EN 4609 on aerospace series - MORTORQ Spiral Drive Recesses1 is useful for:   MORTORQ Spiral Drive Recesses1 manufacturers Aerospace parts manufacturers Why should you use BS EN 4609 - Aerospace series - MORTORQ Spiral Drive Recesses1 ? Spiral drive recesses for threaded fasteners feature a recess that allows for full radial contact of the drive bit along all four wings of the recess, providing up to twice the torque o...

Aerospace series. Spiral drive recesses for threaded fasteners. Geometrical definition and technical requirements

BS 2A 226:2019 航空航天系列 螺栓规格 六角头 0.250 英寸以下统一短螺纹 合金钢 镀镉 分类：环境温度下 R_m = 124 000 – 146 000 lbf/in² (855 – 1 007 MPa) | +190 ℃ ...

1   Scope This British Standard specifies the materials, dimensions, protective finish and inspection requirements for steel bolts with Unified hexagons and Unified threads for aircraft. NOTE The values in British units are to be regarded as the standard.

Aerospace series. Specification for Bolts, Hexagonal head, Unified short threads below .250 inch, Alloy steel, Cadmium plated. Classification: R_m = 124 000 – 146 000 lbf/in² (855 – 1 007 MPa) at ambient temp | +190 ºC.…

BS EN 3740:2019 航空航天系列 螺栓 带肩 薄六角头 紧公差杆 短螺纹 钛合金材质 阳极氧化 MoS2 涂层 分类：1 100 MPa（环境温度）/315 °C

What is BS EN 3740 - Aerospace series - Bolts about? BS EN 3740 is a European standard on aerospace series that covers Bolts, shouldered, thin hexagonal head, close tolerance shank, short thread, in titanium alloy. BS EN 3740 specifies the characteristics of bolts, shouldered, thin hexagonal head, close tolerance shank, short thread, in titanium alloy, anodized, MoS2 dryfilm coated, for aerospace applications. Note: These bolts are intended to be used with washers according to EN 2414 and nuts according to EN 3230. Who is BS EN 3740 - Aerospace series - Bolts for ? BS EN 3740 on aerospace series - bolts is useful for:   Aerospace bolts manufacturers Why should you use BS EN 3740 - Aerospace series – Bolts ? Aircraft quality bolts are made from alloy steel, sta...

Aerospace series. Bolts, shouldered, thin hexagonal head, close tolerance shank, short thread, in titanium alloy, anodized, MoS2 coated. Classification: 1 100 MPa (at ambient temperature)/315 °C

BS EN 4161:2019 航空航天系列 螺钉 盘头 偏置十字槽 粗公差普通柄 长螺纹 合金钢材质 镀镉 分类：1 100 PMa（环境温度）/235 °C

What is BS EN 4161 - Aerospace series - Screws about? BS EN 4161 is a European standard on aerospace series that covers crews, pan head, offset cruciform recess, coarse tolerance normal shank, long thread, in alloy steel, cadmium plated. BS EN 4161 specifies the characteristics of screws, pan head, offset cruciform recess, coarse tolerance normal shank, long thread, in alloy steel, cadmium plated, for aerospace applications. Who is BS EN 4161 - Aerospace series - Screws for ? BS EN 4161 on aerospace series - screws is useful for:   Aerospace screws manufacturers Why should you use BS EN 4161 - Aerospace series - Screws ? Screws are the most commonly used threaded fastening devices on aircraft. They differ from bolts inasmuch as they are generally made of lower strength materials. They can be installed with a loose fitting thread, and ...

Aerospace series. Screws, pan head, offset cruciform recess, coarse tolerance normal shank, long thread, in alloy steel, cadmium plated. Classification: 1 100 PMa (at ambient temperature)/235 °C

BS EN 3685:2019 航空航天系列 螺栓采用耐热钢 FE-PA2601 (A286) 分类：1 100 MPa/650 °C 技术规格

What is BS EN 3685 - Bolts in heat resisting steel FEPA2601 (A286) about? BS EN 3685 is a European standard on aerospace series that covers technical specification on Bolts in heat resisting steel FEPA2601 (A286) – Classification: 1 100 MPa/650 °C. BS EN 3685 specifies the technical specification, qualification and quality assurance requirements for bolts in material FE–PA2601 (A286) of tensile strength class 1 100 MPa at room temperature, maximum test temperature of material 650 °C. Who is BS EN 3685 - Bolts in heat resisting steel FEPA2601 (A286)  for ? BS EN 3685 on Bolts in heat resisting steel FEPA2601 (A286) is useful for:   Aerospace parts manufacturers Bolts in heat resisting steel manufacturers Why should you use BS EN 3685 - Bolts in heat resisting steel FEPA2601 (A286) ? Aircraft quality bolts are made from alloy steel, stainless or corrosion resistant steel, aluminum alloys and tita...

Aerospace series. Bolts in heat resisting steel FE-PA2601 (A286). Classification: 1 100 MPa/650 °C. Technical specification

BS 5A 228:2019 螺栓规格 双六角头 可选锁紧线孔 统一螺纹 合金钢 镀镉 分类：环境温度下 R_m ≥ 1241 MPa (180 000 lbf/in²) | +190°C

1   Scope This British Standard specifies the materials, dimensions, finish and inspection requirements for steel bolts of high metallurgical quality with double hexagon head and unified screw threads of ‘UNJF’ basic profile, with optional locking wire holes for aircraft use. CAUTION. This British Standard features parts that have cadmium as a plating material which has been restricted and/or banned for use in many countries owing to environmental and health concerns; they should not be used in new product designs. Local officials should be consulted about any concerns on the use of cadmium-plated parts.

Specification for bolts, double hexagonal heads, optional locking wire holes, unified threads, alloy steel, cadmium plated. Classification: R_m ≥ 1241 MPa (180 000 lbf/in²) at ambient temp | +190°C

BS 2A 254 to 2A 259:2019 螺栓、六角头、紧公差杆、UNJF 螺纹、开口销和螺栓锁线孔选项 钛合金 各种饰面 分类：环境温度下 R_m 1 100-1 250 MPa (160 000-180 000 lbf/in²) |…

1   Scope This British Standard specifies the materials, dimensions, finish and inspection requirements for titanium alloy bolts with hexagonal heads and UNJ thread for aerospace use. CAUTION . BS A 257 bolts have cadmium as a plating material which has been restricted and/or banned for use in many countries owing to environmental and health concerns; they should not be used in new product designs . Local officials should be consulted about any concerns on the use of cadmium-plated parts. In addition, cadmium plating on titanium parts has been documented to result in stress corrosion and also solid metal embrittlement (SME) when exposed to relatively low temperatures. Accordingly, BS A 258 has been introduced as a replacement. When considering the use of cadmium plated titanium bolts, attention is drawn to Def Stan 00-970 Pt.1/14 Section 4 Leaflet 8 which recommends certain limitations on their use.

Bolts, hexagonal head, close tolerance shank, UNJF threads, split pin & locking wire hole options, titanium alloy, various finishes. Classification: R_m 1 100-1 250 MPa (160 000-180 000 lbf/in²) at Ambient Temperature |…

19/30395617 DC BS 3A 108. 飞机用紧公差杆钢螺栓（统一六角形和统一螺纹）

BS 3A 108. Steel bolts (unified hexagons and unified threads) with close tolerance shanks for aircraft

BS EN 4852:2019 航空航天系列 用于螺纹紧固件的外部螺旋驱动头 几何定义和紧固件头扳手配置

What is BS EN 4852 - external MORTORQ super bolt head spiral drive system1 about? BS EN 4852 is a European standard on aerospace series that covers external spiral drive heads for threaded fasteners and its geometrical definition and fastener head wrenching configuration. BS EN 4852 specifies dimensions and gauging system for external MORTORQ super bolt head spiral drive system1 Who is BS EN 4852 - external MORTORQ super bolt head spiral drive system1 for ? BS EN 4852 on external MORTORQ super bolt head spiral drive system1 is useful for:   external MORTORQ super bolt head spiral drive system1 manufacturers Aerospace parts manufacturers Why should you use BS EN 4852 - external MORTORQ super bolt head spiral drive system1 ? Fasteners are the mechanical components used to temporarily join two or more objects. Threaded fasteners are particularly effective at joining multiple objects due to their th...

Aerospace series. External spiral drive heads for threaded fasteners. Geometrical definition and fastener head wrenching configuration

19/30397735 DC BS EN 2897 航空航天系列 螺钉 盘头 偏置十字槽 紧公差普通柄 短螺纹 合金钢材质 镀镉 分类 1 100 MPa（环境温度）/235 °C

BS EN 2897. Aerospace series. Screws, pan head, offset cruciform recess, close tolerance normal shank, short thread, in alloy steel, cadmium plated. Classification. 1 100 MPa (at ambient temperature)/235 °C

BS EN 2583:2019 航空航天系列 螺栓 MJ 螺纹 采用耐热镍基合金 NI-PH2601(Inconel 718)分类：1275 MPa（环境温度）/650°C 技术规格

What is BS EN 2583 - Bolts and MJ threads about?    BS EN 2583 is a European standard on aerospace series which covers bolts, MJ threads, in heat resisting nickel base alloy.   BS EN 2583 specifies the characteristics, qualification and acceptance requirements for bolts with MJ threads in NI-PH2601.   Who is BS EN 2583 - Bolts and MJ threads for?   BS EN 2583 on bolts, MJ threads, in heat resisting nickel base alloy is applicable to:   Aerospace parts manufacturers   Bolt manufacturers

Aerospace series. Bolts, MJ threads, in heat resisting nickel base alloy NI-PH2601 (Inconel 718). Classification: 1 275 MPa (at ambient temperature)/650°C. Technical specification

BS EN 3818:2019 航空航天系列 螺栓 MJ 螺纹 钛合金 TI-P64001 强度等级：1100 MPa（环境温度） 技术规格

What is BS EN 3818 - Bolts in Titanium alloy about? BS EN 3818 is a European standard on technical specifications for aerospace applications. BS EN 3818 specifies the characteristics, qualification and acceptance requirements for bolts with MJ threads in TI-P64001, for aerospace applications. Who is BS EN 3818 - Bolts in Titanium alloy for? BS EN 3818 on bolts in titanium alloy is applicable to: Aerospace parts manufacturers Bolt manufacturers MJ Threads manufacturers Why should you use BS EN 3818 - Bolts in Titanium alloy ? A bolt is a form of threaded fastener with an external male thread requiring a matching pre-formed female thread such as a nut. Bolts are very closely related to screws. Bolts are typically used to hold materials or objects together, or to position objects. The chamfer at the opposite end of the head provides a slightly bevelled edge which helps with inserting the bolt into holes and nuts. In the field of aerospace, titanium has been applied for many years. Commercially pure titanium and titanium alloy as represented by Ti-6Al-4V are m...

Aerospace series. Bolts, MJ threads, in titanium alloy TI- P64001. Strength class: 1 100 MPa (at ambient temperature). Technical specification

BS 2A 266 to 2A 271:2016+A1:2019 航空航天系列 螺栓 100° 沉头 高扭矩高速驱动凹槽 紧公差柄 UNJF 螺纹 开口销孔选项 钛合金 各种表面处理 分类：R_m 1100–1250 MPa (160 000–180 000…

What is BS 6180 about?    BS 6180 is a British standard on barriers in and about buildings which covers its code of practice.   BS 6180 gives recommendations and guidance for the design and construction of temporary and permanent barriers to be provided in and about buildings and places of assembly, such barriers being positioned and designed to protect persons from various hazards and to restrict or control the movement of persons or vehicles.   Note: BS 6180 does not apply to areas or buildings designed for spectator sports, construction sites, or barriers to protect children younger than 24 months.  Who is BS 6180 for?   BS 6180 on barriers in and about buildings is useful for:    

Aerospace Series. Bolt, 100° Countersunk head, Hi-Torque speed drive recess, close tolerance shank, UNJF thread, split pin hole option, titanium alloy, various finishes. Classification: R_m 1100–1250 MPa (160 000–180 000…