49.030.20 螺栓、螺钉、螺柱 标准查询与下载

EN 4072:2016 航空航天系列-铝IVD涂覆的钛合金短螺纹紧公差标准柄100°沉头偏置十字凹槽螺钉-等级:1100MPa(室温)/425℃

This standard specifies the characteristics of screws, 100° countersunk normal head, offset cruciform recess, close tolerance shank, short thread, in titanium alloy, aluminium IVD coated. Classification: 1100 MPa1) / 425 °C2).

Aerospace series - Screws@ 100��ountersunk normal head@ offset cruciform recess@ close tolerance shank@ short thread in titanium alloy@ aluminium IVD coated - Classification: 1 100 MPa (at ambient temperature) / 425 ��

BS ISO 12261:2016 航空航天.强度级小于或等于1100MPa的涂层或未涂层金属材料制节径杆长长度MJ螺纹的内偏移十字形肋状或非肋状驱动的平头螺钉.尺寸

Aerospace. Screws, pan head, internal offset cruciform ribbed or unribbed drive, pitch diameter shank, long length MJ threads, metallic material, coated or uncoated, strength classes less than or equal to 1 100 MPa. Dimensions

BS ISO 9154:2016 航空航天.由强度等级为1550 MPa的耐热镍基合金制成的带MJ螺纹的螺栓.采购规范

Aerospace. Bolts, with MJ threads, made of heat-resistant nickel-based alloy, strength class 1 550 MPa. Procurement specification

BS 2A 266 TO 2A 271:2016 螺栓, 100°沉头, 高扭矩调速凹痕, UNJF螺纹, 可选开尾销孔, 钛合金, 多种饰面, 分类: 在TA/+315℃时为80 Tf/in2 (1100 MPa)

Bolt, 100 Countersunk head, Hi-Torque speed drive recess, UNJF thread , split pin hole option, titanium alloy, various finishes, Classification: 80 Tf/in2 (1 100 MPa) at TA/+315 C

ISO 12261:2016 航空航天 强度等级小于或等于1100MPa、金属材料制成、有涂覆或未涂覆、长长度MJ螺纹、中径杆型、内偏高扭矩十字槽或无打滑扳动的平头螺钉 尺寸

Aerospace - Screws, pan head, internal offset cruciform ribbed or unribbed drive, pitch diameter shank, long length MJ threads, metallic material, coated or uncoated, strength classes less than or equal to 1 100 MPa - Dimensions

ISO 12260:2016 航空航天.强度等级小于或等于1100MPa、金属材料制成、有涂覆或未涂覆、短的或中等长度MJ螺纹,阶梯杆型、内偏高扭矩十字槽或无打滑扳动的平头螺钉.尺寸

Aerospace - Screws, pan head, internal offset cruciform ribbed or unribbed drive, stepped shank, short or medium length MJ threads, metallic material, coated or uncoated, strength classes less than or equal to 1 100 MPa - Dimensions

ISO 9154:2016 航空航天.由强度等级为1550 MPa的耐热镍基合金制成的带MJ螺纹的螺栓.采购规范

Aerospace - Bolts, with MJ threads, made of heat-resistant nickel-based alloy, strength class 1 550 MPa - Procurement specification

SAE AS3086B-2016 螺柱 直头 钥匙锁定 镀镉 钢 UNS G87400 .1900-32 UNJF-3A X .1900-32 UNJF-3A

STUD - STRAIGHT@ KEY LOCKED@ CADMIUM PLATED@ STEEL@ UNS G87400 .1900-32 UNJF-3A X .1900-32 UNJF-3A

SAE AS3089B-2016 3750-24 UNJF-3A X型和3750-24 UNJF-3A型镀镉钢螺栓锁紧的直螺栓

STUD@ STRAIGHT@ KEY LOCKED@ CADMIUM PLATED@ STEEL@ UNS G87400 .3750-24 UNJF-3A X .3750-24 UNJF-3A

GSO ISO 14279:2015 航空航天 发动机、内部构件和十字形 公制系列

  Scope is not provided for this standard

Aerospace -- Drives, internal, cruciform -- Metric series

SAE AS9572B-2015 螺丝 机器 双六角加长垫圈头 钻孔 PD 柄 镀银 耐腐蚀和耐热钢 UNS S66286 130 KSI MIN .1380-40 UNJF-3A

SCREW@ MACHINE - DOUBLE HEXAGON EXTENDED WASHER HEAD@ DRILLED@ PD SHANK@ SILVER PLATED@ CORROSION AND HEAT RESISTANT STEEL@ UNS S66286@ 130 KSI MIN@ .1380-40 UNJF-3A

SAE AS9534B-2015 机用螺栓 六角头，钻 1 个孔，镀镉，钢 UNS G87400, 125 KSI MIN, .5000-20 UNJF-3A

BOLT, MACHINE - HEXAGON HEAD, DRILLED 1 HOLE, CADMIUM PLATED, STEEL UNS G87400, 125 KSI MIN, .5000-20 UNJF-3A

BS A 401-420:2015 不同材料制成的100平埋头, 带有内六角传动凹槽 (统一螺纹小于$9D英寸) 的螺钉规格

Specification for screws, pan and 100 countersunk head, hexalobular drive recess (unified threads below $9D inch) in various materials

SAE AS9456C-2015 机用螺栓 钢制，扩散镀镍镉，六角头，UNS K14675, 195 KSI MIN, .5000-20 UNJF-3A

BOLT, MACHINE - STEEL, DIFFUSED NICKEL-CADMIUM PLATED, HEXAGON HEAD, UNS K14675, 195 KSI MIN, .5000-20 UNJF-3A

SAE AS9458C-2015 机用螺栓 钢，扩散镍镀镉，六角头，UNS K14675, 195 KSI MIN, .6250-18 UNJF-3A

BOLT, MACHINE - STEEL, DIFFUSED NICKEL CADMIUM PLATED, HEXAGON HEAD, UNS K14675, 195 KSI MIN, .6250-18 UNJF-3A

SAE AS9453C-2015 机用螺栓 钢制，扩散镀镍镉，六角头，UNS K14675, 195 KSI MIN, .3125-24 UNJF-3A

BOLT, MACHINE - STEEL, DIFFUSED NICKEL-CADMIUM PLATED, HEXAGON HEAD, UNS K14675, 195 KSI MIN, .3125-24 UNJF-3A

SAE AS9455C-2015 机用螺栓 钢制，扩散镀镍镉，六角头，UNS K14675, 195 KSI MIN, .4375-20 UNJF-3A

BOLT, MACHINE - STEEL, DIFFUSED NICKEL-CADMIUM PLATED, HEXAGON HEAD, UNS K14675, 195 KSI MIN, .4375-20 UNJF-3A

SAE AS3405A-2015 螺栓 机器 六角头 钻孔 6 孔 PD 柄 AMS5708（UNS N07001） .2500-28 UNJF-3A

BOLT@ MACHINE - HEXAGON HEAD@ DRILLED 6 HOLES@ PD SHANK@ AMS5708 (UNS N07001)@ .2500-28 UNJF-3A

BS ISO 16130:2015 航空航天系列. 螺栓连接的锁定行为在横向载荷条件下的动态试验 (振动试验)

Aerospace series. Dynamic testing of the locking behaviour of bolted connections under transverse loading conditions (vibration test)

SAE AS9530B-2015 机用螺栓 六角头，钻 1 个孔，镀镉，钢 UNS G87400, 125 KSI MIN, .2500-28 UNJF-3A

BOLT, MACHINE - HEXAGON HEAD, DRILLED 1 HOLE, CADMIUM PLATED, STEEL UNS G87400, 125 KSI MIN, .2500-28 UNJF-3A