49.030.20 螺栓、螺钉、螺柱 标准查询与下载

BS EN 4859:2019 航空航天系列 基于传感器的夹紧负载确定/高强度螺栓 技术规格

What is BS EN 4859 about?    BS EN 4859 is a European standard on clamp load determination that discusses the methods and criteria for determining clamp load of high tensile bolts. BS EN 4859 specifies the technical, qualification, and quality assurance requirements for sensor-based clamp load measurement systems for high tensile bolts and other clamp load-sensitive elements.   Primarily for aerospace applications, it applies to such products when referenced on the product standard or drawing.   Who is BS EN 4859 for?    BS EN 4859 on sensor-based clamp load determination is relevant to:   Manufacturer of bolts and sensor bolts  

Aerospace series. Sensor based clamp load determination / high tensile bolts. Technical specification

19/30389268 DC BS EN 7112 航空航天系列 螺栓 六角头 杆部公差h11 公制和英制系列 产品标准

BS EN 7112. Aerospace series. Bolt, hexagonal head, shank tolerance h11, metric and inch series. Product standard

19/30389262 DC BS EN 7110 航空航天系列 螺栓 12 点法兰头 公制系列 产品标准

BS EN 7110. Aerospace series. Bolt, 12 point flange head, metric series. Product standard

19/30389265 DC BS EN 7111 航空航天系列 螺栓、六角头、带肩杆、公制、英制系列 产品标准

BS EN 7111. Aerospace series. Bolt, hexagonal head, shoulder shank, metric and inch series. Product standard

BS 2A 175:1962+A3:2018 航空航天系列 阳极氧化铝合金 100° 沉头、D 形槽凹槽螺栓规范（统一螺纹）

What is BS 2A 175 about?    BS 2A 175 is a British standard on aluminum alloy bolts that discusses the criteria for manufacturing high-quality aluminum alloy bolts with a 100° countersunk.   BS 2A 175  specifies the materials, dimensions, and inspection requirements for machined and anodized aluminum alloy bolts with 100° countersunk D-slot recess drive heads and Unified threads for aircraft.   Who is BS 2A 175 for?    BS 2A 175 on aluminum alloy bolts is relevant to:   Manufacturer of aluminum alloy bolt   ...

Aerospace Series. Specification for bolts, 100° countersunk head, D-slot recess in anodized aluminium alloy (unified threads)

18/30383887 DC BS EN 7102 航空航天系列 盘头螺栓公制、英制系列

BS EN 7102. Aerospace series. Pan-head bolts metric and inch series

BS 4A 112:1992+A1:2018 航空航天系列 镀镉钢六角头（统一螺纹）剪切螺栓规范（分类 Rm = 880-1080 MPa）

1   Scope This British Standard specifies materials, dimensions, finish and inspection requirements for steel shear bolts with Unified hexagons and Unified threads and with close tolerance shanks, cadmium plated, to be suitable for insertion in aluminium alloy materials for aerospace use. NOTE The latest revision of an Aerospace Series standard is indicated by a prefix number.

Aerospace series. Specification for shear bolts, hexagonal heads (Unified threads) in cadmium-plated steel (Classification Rm = 880-1080 MPa)

BS EN 4162:2016 航空航天系列 螺钉 100° 沉头普通头 偏置十字槽 粗公差普通柄 中等长度螺纹 合金钢材质 镀镉 分类：1 100 MPa（环境温度）/235 °C

1   Scope This European Standard specifies the characteristics of screws, 100° countersunk normal head, offset cruciform recess, coarse tolerance normal shank, medium length thread, in alloy steel, cadmium plated. Classification: 1 100 MPa 1) / 235 °C 2) .

Aerospace series. Screws 100° countersunk normal head, offset cruciform recess, coarse tolerance normal shank, medium length thread, in alloy steel, cadmium plated. Classification: 1 100 MPa (at ambient temperature) / 235 °C

KS W ISO 7689:2018 航空航天—强度等级为1100MPa和MJ螺纹的合金钢螺栓—采购规范

Aerospace－Alloy steel bolts with strength classification 1 100 MPa and MJ threads－Procurement specification

KS W ISO 7913-2018 航空航天米制螺栓和螺钉形位公差

Aerospace－Bolts and screws, metric－Tolerances of form and position

KS W ISO 7689-2018 航空航天—强度等级为1100MPa和MJ螺纹的合金钢螺栓—采购规范

Aerospace－Alloy steel bolts with strength classification 1 100 MPa and MJ threads－Procurement specification

KS W ISO 7961:2018 航空航天螺栓试验方法

Aerospace－Bolts－Test methods

KS W ISO 7913:2018 航空航天米制螺栓和螺钉形位公差

Aerospace－Bolts and screws, metric－Tolerances of form and position

KS W ISO 7961-2018 航空航天螺栓试验方法

Aerospace－Bolts－Test methods

KS W ISO 7961-2018(2023) 航空航天螺栓试验方法

Aerospace－Bolts－Test methods

KS W ISO 7689-2018(2023) 航空航天强度等级为1 100MPa和MJ螺纹的合金钢螺栓采购规范

Aerospace－Alloy steel bolts with strength classification 1 100 MPa and MJ threads－Procurement specification

KS W ISO 7913-2018(2023) 航空航天.米制螺栓和螺钉.形状和位置公差

Aerospace－Bolts and screws, metric－Tolerances of form and position

DIN EN 3820:2017 航空航天系列.MoS₂润滑的阳极氧化钛合金短螺纹紧公差标准杆标准六角头米制螺栓.等级:1100MPa(室温)/315℃;德文和英文版本EN 3820-2017

This standard specifies the characteristics of bolts, normal hexagonal head, coarse tolerance normal shank, short thread, in titanium alloy, anodized, MoS2 lubricated. Classification: 1100 MPa / 315 °C.

Aerospace series - Metric bolts, normal hexagon head, coarse tolerance normal shank, short thread, in titanium alloy, anodized, MoS2 lubricated - Classification: 1100 MPa (at ambient temperature)/315 °C; German and English version EN 3820:2017

BS EN 3820:2017 航空航天系列 公制螺栓 普通六角头 粗公差普通杆 短螺纹 钛合金材质 阳极氧化 MoS2 润滑 分类：1100 MPa（环境温度）/315 $0DC

Aerospace series. Metric bolts, normal hexagon head, coarse tolerance normal shank, short thread, in titanium alloy, anodized, MoS2 lubricated. Classification: 1 100 MPa (at ambient temperature)/315 $0DC

NF L24-110*NF EN 3820:2017 航空航天系列.MOS2润滑的阳极化钛合金短螺纹标准杆粗公差普通六角头米制螺钉.等级:1100MPa(室温下)/315℃

This standard specifies the characteristics of bolts, normal hexagonal head, coarse tolerance normal shank, short thread, in titanium alloy, anodized, MoS2 lubricated.

Aerospace series - Metric bolts, normal hexagon head, coarse tolerance normal shank, short thread, in titanium alloy, anodized, MoS2 lubricated - Classification : 1 100 MPa (at ambient temperature)/315 oC