49.030.20 螺栓、螺钉、螺柱 标准查询与下载

GSO ISO 9219:2017 航空航天 滑轮用细六角头螺栓、紧公差杆、短螺纹、镀镉合金钢或钛合金和二硫化钼润滑或钝化耐腐蚀钢 尺寸和质量

This International Standard specifies the characteristics of bolts for pulleys with thin hexagonal head, close tolerance shank and short thread, — in alloy steel and cadmium plated, classification 1 100MPa)/235 °C); — in titanium alloy and MoS2 lubricated, classification 1 100 MPa)/315 °C); or — in corrosion-resistant steel and passivated. This International Standard is applicable to bolts used with ISO 9217 and ISO 9218 washers, ISO 9216 nuts and ISO 1234 split pins.

Aerospace -- Bolts, thin hexagonal head, for pulleys, close tolerance shank, short thread, in alloy steel and cadmium plated or in titanium alloy and MoS2 lubricated or in corrosion-resistant steel and passivated -- Dimensions and masses

BS EN 3302:2017 航空航天系列 螺栓采用耐热钢 FE-PM1708(FV535)分类：1000 MPa/550 $0DC 技术规格

Aerospace series. Bolts in heat resisting steel FE-PM1708 (FV535). Classification: 1 000 MPa/550 $0DC. Technical specification

EN 3302:2017 航空航天系列.FE-PM1708(FV535)型钢耐热钢制螺栓.等级-1000MPa/ 550℃.技术规范

Aerospace series - Bolts in heat resisting steel FE-PM1708 (FV535) - Classification: 1 000 MPa/550 ��- Technical specification

NF L24-168*NF EN 4178:2017 航空航天系列.MoS2润滑阳极氧化的钛合金制中等长度螺纹粗公差标准柄六瓣凹槽平头螺钉.分类:1100 MPa(室温)/315℃

Aerospace series - Screws, pan head, six lobe recess, coarse tolerance normal shank, medium length thread, in titanium alloy, anodized, MoS2 lubricated - Classification : 1 100 MPa (at ambient temperature)/315 oC

DIN EN 4072:2017 航空航天系列.铝IVD涂层钛合金制短螺纹粗容差标称手柄斜十字凹槽盘100°标称埋头螺钉.分类:1100 MPa(环境温度)/425℃.德文和英文版本EN 4072

Aerospace series - Screws, 100° countersunk normal head, offset cruciform recess, close tolerance shank, short thread in titanium alloy, aluminium IVD coated - Classification: 1 100 MPa (at ambient temperature) / 425 °C; German and English version EN 4072

DIN EN 4178:2017 航空航天系列.MoS2润滑的阳极氧化处理的、钛合金中等长度螺纹粗公差标准柄六瓣凹槽平头螺钉.分类:1100 MPa(室温下)/315°C.德文和英文版本EN 4178-2017

Aerospace series - Screws, pan head, six lobe recess, coarse tolerance normal shank, medium length thread, in titanium alloy, anodized, MoS2 lubricated - Classification: 1 100 MPa (at ambient temperature) / 315 °C; German and English version EN 4178:2017

EN 4178:2017 航空航天系列-MoS2润滑阳极氧化的钛合金制中等长度螺纹粗公差标准柄六瓣凹槽平头螺钉-分类:1100MPa(室温)/315℃

This European Standard specifies the characteristics of screws, pan head, six lobe recess, coarse tolerance normal shank, medium length thread, in titanium alloy, anodized, MoS2 lubricated. Classification: 1100 MPa / 315 °C.

Aerospace series - Screws@ pan head@ six lobe recess@ coarse tolerance normal shank@ medium length thread@ in titanium alloy@ anodized@ MoS2 lubricated - Classification: 1 100 MPa (at ambient temperature) / 315 ��

DIN EN 4162:2017 航空航天系列.镀镉合金钢中长度螺纹粗公差标称柄偏十字形凹槽埋头100°螺钉.分类:1100MPa(室温)/235℃

Aerospace series - Screws 100° countersunk normal head, offset cruciform recess, coarse tolerance normal shank, medium length thread, in alloy steel, cadmium plated - Classification: 1 100 MPa (at ambient temperature) / 235 °C; German and English version

EN 4072:2016/AC:2017 航空航天系列-铝IVD涂覆的钛合金短螺纹紧公差标准柄100°沉头偏置十字凹槽螺钉-等级:1100MPa(室温)/425℃ 包含修改件AC,2017

This standard specifies the characteristics of screws, 100° countersunk normal head, offset cruciform recess, close tolerance shank, short thread, in titanium alloy, aluminium IVD coated. Classification: 1100 MPa/425 °C.

Aerospace series - Screws, 100° countersunk normal head, offset cruciform recess, close tolerance shank, short thread in titanium alloy, aluminium IVD coated - Classification: 1100 MPa (at ambient temperature)/425 °C

GSO ISO 5843-3:2016 航空航天 等效术语列表 第3部分：航空航天螺栓和螺母

ISO 5843 establishes a list of equivalent terms used in the field of aerospace construction. This part of ISO 5843 gives those terms relating to aerospace bolts and nuts. NOTE — In addition to terms used in the three official ISO languages (English, French and Russian), this part of ISO 5843 gives the equivalent terms in the German language; these have been included al the request of ISO Technical Committee ISOITC 20 and are published under the responsibility of the member body for Germany (DIN). However, only the terms given in the official languages can be considered as ISO

Aerospace -- List of equivalent terms -- Part 3: Aerospace bolts and nuts

DIN 65526:2016 航空航天系列.钛合金制带短长度MJ螺纹的紧公差六角头螺栓.使用温度315℃及其以下，公称抗拉强度1100MPa.德文和英文文本

Aerospace series - Hexagon bolts, close tolerance, with short-length MJ thread, titanium alloy, nominal tensile strength 1100 MPa, for temperatures up to 315 °C; Text in German and English

KS W ISO 12256-2016 航空航天 驱动器，内部，十字形，带肋 公制系列

Aerospace－Drives, internal, cruciform, ribbed－Metric series

KS W ISO 14277-2016 航空航天 – 带肋驱动器，用于内部偏置十字形带肋或无肋驱动器 – 公制系列

Aerospace－Drivers, ribbed, for internal offset cruciform ribbed or unribbed drives－Metric series

KS W ISO 14278-2016 航空航天 仪表，用于内部偏置十字形带肋或无肋驱动器 公制系列

Aerospace－Gauges, for internal offset cruciform ribbed or unribbed drives－Metric series

KS W ISO 14279:2016 航空航天 内十字形驱动器 米制系列

Aerospace－Drives, internal, cruciform－Metric series

KS W 1626-2016 航空航天 自攻和驱动螺钉

Aerospace — Tapping and drive screws

KS W ISO 14278:2016 航空航天 有条纹的内调整偏差十字形精确计量仪或无条纹驱动器 米制系列

Aerospace－Gauges, for internal offset cruciform ribbed or unribbed drives－Metric series

KS W ISO 14277:2016 航空航天 有条纹的内调整偏差十字形驱动器或无条纹驱动器 米制系列

Aerospace－Drivers, ribbed, for internal offset cruciform ribbed or unribbed drives－Metric series

KS W ISO 12256:2016 航空航天 内十字形槽扳手 米制系列

Aerospace－Drives, internal, cruciform, ribbed－Metric series

DIN EN 6105:2016 航天系列 带肩钉

Aerospace series - Stud with shoulder; German and English version EN 6105:2016