49.030.50 垫圈和其他锁紧元件 标准查询与下载

EN 3383:2012 航空航天系列.真空镀镉的内部轴向固定钢吊环

This standard defines the characteristics of axial mounting internal retaining rings, in steel, vacuum cadmium plated, for aerospace applications. The cadmium plating restricts the use at temperatures not exceeding 235 ℃.

Aerospace series - Rings retaining, internal, axial mounting, steel, vacuum cadmium plated

SAE AS9482B-2012 扩散的镍镉镀层埋头孔AMS 6437或AMS 6485扁钢垫圈

This document has been declared "Stabilized" and will no longer be subjected to periodic reviews for currency. Users are responsible for verifying references and continued suitability or technical requirements. New technology may exist.

Washer, Flat Steel AMS 6437 or AMS 6485, Diffused Nickel-Cadium Plated, Countersunk

SAE AS9482A-2011 扩散的镍镉镀层埋头孔AMS 6437或AMS 6485扁钢垫圈

Washer, Flat Steel AMS 6437 or AMS 6485, Diffused Nickel-Cadium Plated, Countersunk

DIN 65209:2010 航空航天系统.沉头垫圈.德文和英文文本

This standard specifies required characteristics for dimensions, materials and surface treatment of washers, which are primarily designed for use under bolt head.

Aerospace series - Washers, countersunk; Text in German and English

NF L23-170*NF EN 3017:2008 航空航天系列.饰面/包装垫圈.耐热钢

Aerospace series - Washers, facing/packing - Heat resisting steel.

DIN EN 4399:2008 航空航天系列.镀银FE-PA92HT(A286)型耐热钢自锁紧螺纹环

This standard specifies the characteristics of threaded, self-locking rings, in FE-PA2601, silver plated, metric, chiefly used for axial location of bearing outer rings. Maximum test temperature of the parts: 450 ℃. NOTE These parts are designed to be used with 4H6H internal threads.

Aerospace series - Rings, threaded, self-locking, in heat resisting steel FE-PA92HT (A286), silver plated; German and English version EN 4399:2008

DIN EN 3729:2008 航空航天系列.镀银FE-PA92HT (A286)型耐热钢左螺纹自锁紧螺纹连接环

This standard specifies the characteristics of threaded, self-locking rings, with left-hand threads, in FE-PA92HT, silver plated, chiefly used for axial location of bearing outer rings. Maximum test temperature of the parts: 450 ℃. NOTE These parts are designed to be used with 4H6H internal threads.

Aerospace series - Rings, threaded, self-locking, left-hand thread, in heat resisting steel FE-PA92HT (A286), silver plated; German and English version EN 3729:2008

DIN EN 3781:2008 航空航天系列.弹簧绕制固定环用槽.设计标准

This standard defines the groove dimensions for retaining rings. It is applicable for rings as per MA4016 for use on external grooves and rings as per MA4017 for use on internal grooves.

Aerospace series - Grooves for spiral wound retaining rings - Design standard; German and English version EN 3781:2008

LST EN 3017-2008 航空航天系列 垫圈，表面/填料 耐热钢

Aerospace series - Washers, facing/packing - Heat resisting steel

DIN EN 3016:2008 航空航天系列 载荷扩散的沉头垫圈 耐热钢

This standard specifies the characteristics of heat resisting steel, countersunk, load spreading washers for use in aerospace applications at temperatures not exceeding 650 ℃. They are intended primarily for use under the head of bolts with strength classification up to 1 250 MPa. They are used to provide sufficient bearing area to prevent indentation of parent metals with low compressive strength at operating temperatures, thus ensuring no relaxation in the bolt load occurs.

Aerospace series - Washers countersunk, load spreading - Heat resisting steel; German and English version EN 3016:2008

DIN EN 3017:2008 航空航天系列.垫圈、衬片/衬垫.耐热钢

This standard specifies the characteristics of heat resisting steel, facing/packing washers for use in non load spreading aerospace applications at temperatures not exceeding 650 ℃. They are intended primarily for use as facing/packing washers under the head of bolts with strength classification up to 1 250 MPa to provide adequate clamping of slotted or recessed surfaces (especially on brackets and pipe clippings) and used for adjusting grip lengths of bolts. These washers are not for use in load spreading applications for which EN 3016 washer shall be used.

Aerospace series - Washers, facing/packing - Heat resisting steel; German and English version EN 3017:2008

LST EN 4399-2008 航空航天系列 环，螺纹，自锁，耐热钢 FE-PA92HT（A286），镀银

Aerospace series - Rings, threaded, self-locking, in heat resisting steel FE-PA92HT (A286), silver plated

LST EN 3016-2008 航空航天系列 沉头垫圈，载荷分布 耐热钢

Aerospace series - Washers countersunk, load spreading - Heat resisting steel

BS EN 3017:2008 航空航天系列.贴边/密封垫圈.耐热钢

This standard specifies the characteristics of heat resisting steel, facing/packing washers for use in non load spreading aerospace applications at temperatures not exceeding 650 °C. They are intended primarily for use as facing/packing washers under the head of bolts with strength classification up to 1 250 MPa to provide adequate clamping of slotted or recessed surfaces (especially on brackets and pipe clippings) and used for adjusting grip lengths of bolts. These washers are not for use in load spreading applications for which EN 3016 washer shall be used.

Aerospace series - Washers, facing/packing - Heat resisting steel

BS EN 3016:2008 航空航天系列.载荷扩散的沉头垫圈.耐热钢

Aerospace series - Washers countersunk, load spreading - Heat resisting steel

DS/EN 3016:2008 航空航天系列 沉头垫圈，载荷分布 耐热钢

This standard specifies the characteristics of heat resisting steel, countersunk, load spreading washers for use in aerospace applications at temperatures not exceeding 650 °C.They are intended primarily for use under the head of bolts with strength classification up to 1 250 MPa. They are used to provide sufficient bearing area to prevent indentation of parent metals with low compressive strength at operating temperatures, thus ensuring no relaxation in the bolt load occurs.

Aerospace series - Washers countersunk, load spreading - Heat resisting steel

DS/EN 3017:2008 航空航天系列 垫圈，表面/填料 耐热钢

This standard specifies the characteristics of heat resisting steel, facing/packing washers for use in non load spreading aerospace applications at temperatures not exceeding 650 °C.They are intended primarily for use as facing/packing washers under the head of bolts with strength classification up to 1 250 MPa to provide adequate clamping of slotted or recessed surfaces (especially on brackets and pipe clippings) and used for adjusting grip lengths of bolts.These washers are not for use in load spreading applications for which EN 3016 washer shall be used.

Aerospace series - Washers, facing/packing - Heat resisting steel

SAE AS5587A-2008 航空器用支撑平环夹具

Reinstated tolerances to thickness dimensions listed in table2,corrected typographical error for-37"D" dimension,added default angularity tolerance,added marking methods 2D1 or 2E1 as options, specificed type 6 and type 7 for passivation,included requirement to form aluminum in annealed condition,and updated specification references.

Clamp, Loop, Plain, Support, Aircraft

EN 3017:2008 航空航天系列.贴边/密封垫圈.耐热钢

This standard specifies the characteristics of heat resisting steel, facing/packing washers for use in non load spreading aerospace applications at temperatures not exceeding 650 °C. They are intended primarily for use as facing/packing washers under the head of bolts with strength classification up to 1 250 MPa to provide adequate clamping of slotted or recessed surfaces (especially on brackets and pipe clippings) and used for adjusting grip lengths of bolts. These washers are not for use in load spreading applications for which EN 3016 washer shall be used.

Aerospace series - Washers, facing/packing - Heat resisting steel

DS/EN 4399:2008 航空航天系列 环，螺纹，自锁，耐热钢 FE-PA92HT（A286），镀银

This standard specifies the characteristics of threaded, self-locking rings, in FE-PA2601, silver plated, metric, chiefly used for axial location of bearing outer rings.Maximum test temperature of the parts: 450 °C.NOTE These parts are designed to be used with 4H6H internal threads.

Aerospace series - Rings, threaded, self-locking, in heat resisting steel FE-PA92HT (A286), silver plated