49.090 机上设备和仪器 标准查询与下载
共找到 1493 条与 机上设备和仪器 相关的标准，共 100 页
Advanced Surface Movement Guidance and Control System (A-SMGCS); - Part 4: Community Specification for a deployed non-cooperative sensor including its interfaces; Sub-part 2: Specific requirements for a deployed Surface Movement Radar sensor (ETSI EN 303
- ICS
- 49.090
- CCS
- 发布
- 2020-11-01
- 实施
- 2020-11-01
What is BS EN 4660 ‑ 004 - Modular and open avionics architectures about? BS EN 4660 ‑ 004 establishes uniform requirements for Packaging for the Common Functional Modules (CFM) within an Integrated Modular Avionic (IMA) system. It comprises the module physical properties and the Module Physical Interface (MPI) definitions together with guidelines for the IMA rack and the operational environment. The characteristics addressed by the BS EN 4660 ‑ 004 are: Interchangeability: For a given cooling method all modules conforming to the BS EN 4660 ‑ 004 will function correctly when inserted into any rack slot conforming to the BS EN 4660 ‑ 004 for the cooling method. All modules conforming to the Module Physical Interface (MPI) definitions for connector, IED, and cooling interface will function correctly when inserted into any rack slot conforming to the same MPI definition. Maintainability: All modules are easily removable at the first line. No special tools are required at the first line.
Aerospace series. Modular and open avionics architectures - Packaging
- ICS
- 49.090
- CCS
- 发布
- 2019-11-30
- 实施
- 2019-11-30
What is BS EN 4660-003 - Modular and Open Avionics Architectures about ? BS EN 4660-003 is an international standard that defines a set of open architecture standards, concepts, and guidelines for Advanced Avionics Architectures (A3). The three main goals for the MOAA standards are: Reduced life cycle costs Improved mission performance Improved operational performance ...
Aerospace series. Modular and Open Avionics Architectures - Communications/Network
- ICS
- 49.090
- CCS
- 发布
- 2019-11-30
- 实施
- 2019-11-30
1 Scope 1.1 General scope This European Standard establishes uniform requirements for design and development of software architecture for modular avionics systems.
Aerospace series. Modular and Open Avionics Architectures - Software
- ICS
- 49.090
- CCS
- 发布
- 2019-08-31
- 实施
- 2019-08-31
What is BS EN 4641-201 - Fibre optic cable about ? BS EN 4641-201 is a European Standard that specifies the general characteristics, conditions for qualification, acceptance and quality assurance for a fibre optic cable with a 9/125 µm, SM fibre core, and 1,8 µm outside cable diameter and of semi-loose buffer construction. Who is BS EN 4641-201 - Fibre optic cable for ? BS EN 4641-201 on fibre optic cable is useful for: Aerospace avionic and fibre optic technology Spacecraft and space products manufacturers
Aerospace series. Cables, optical, 125 μm diameter cladding - Semi-loose structure 9/125 μm SM fibre nominal 1,8 mm outside diameter. Product standard
- ICS
- 49.090
- CCS
- 发布
- 2018-12-31
- 实施
- 2018-12-31
What is this standard about? This part of BS 4N 100 provides guidance on the physiological factors which should be considered when designing oxygen systems for use within aircraft.
Aircraft oxygen systems and equipment - Guide to the physiological factors
- ICS
- 49.090
- CCS
- 发布
- 2018-12-31
- 实施
- 2018-12-31
What is BS 5N 100-2 - Aircraft oxygen system about ? BS 5N 100-2 specifies methods of test and interpretation of results for verifying conformance of non-metallic materials for use in oxygen-enriched atmospheres. BS 5N 100-2 also specifies directions, requirements, methods and treatment of results from new bomb tests. Who is BS 5N 100-2 - Aircraft oxygen system for ? BS 5N 100-2 on aircraft oxygen system is applicable for: Regulatory authorities Quality control/testing and compliance personnel for aircraft oxygen system Space engineers
Aircraft oxygen systems and equipment. Tests for the compatibility of materials in the presence of oxygen
- ICS
- 49.090
- CCS
- 发布
- 2018-12-31
- 实施
- 2018-12-31
What is this standard about? This part of BS 4N 100 specifies the general design requirements for airborne oxygen breathing systems, including oxygen storage and generation equipment and ground support equipment. New tests are specified for compatibility of materials for use in the presence of oxygen. This part also provides some guidance and recommendations on the design and installation of items of equipment for use in oxygen systems. NOTE The guidance and recommendations contained herein may be used equally well in non-aerospace applications. In addition, for all equipment for aircraft oxygen systems, conformance to the relevant parts, sections and sub-sections of BS G 100 is specified.
Aircraft oxygen systems and equipment - Design and installation
- ICS
- 49.090
- CCS
- 发布
- 2018-12-31
- 实施
- 2018-12-31
What is this standard about? This part of BS 4N 100 provides guidance and recommendations on the selection of materials for use with oxygen to minimize the risk of ignition and combustion. The guidance and recommendations may be used equally well in non-aerospace applications.
Aircraft oxygen systems and equipment - Guidance and recommendations on the selection of materials for use with oxygen
- ICS
- 49.090
- CCS
- 发布
- 2018-12-31
- 实施
- 2018-12-31
What is this standard about? This part of BS 5N 100 provides guidance on the dangers, and avoidance of, fire and explosion hazards associated with oxygen. Annex A provides additional guidance and recommendations on liquid and gaseous oxygen handling, storage and aircraft replenishment.
Aircraft oxygen systems and equipment - Guide to fire and explosion hazards associated with oxygen, including handling, storage and replenishment
- ICS
- 49.090
- CCS
- 发布
- 2018-12-31
- 实施
- 2018-12-31
What is BS EN 4641-106 - Fibre optic cable about ? BS EN 4641-106 is a European Standard that specifies the general characteristics, conditions for qualification, acceptance and quality assurance for a fibre optic cable with a 62,5/125 µm, MM fibre core, and 900 µm outside cable diameter and of semi-loose buffer construction for “inside avionics box” equipment fibre harnessing. Who is BS EN 4641-106 - Fibre optic cable for ? BS EN 4641-106 on fibre optic cable is useful for: Aerospace avionic and fibre optic technology Spacecraft and space products manufacturers Aerospace and defence industries
Aerospace series. Cables, optical, 125 μm diameter cladding - Semi-loose structure 62,5/125 μm GI fibre nominal 0,9 mm outside diameter. Product standard
- ICS
- 49.090
- CCS
- 发布
- 2018-12-31
- 实施
- 2018-12-31
What is BS EN 4641-202 - Fibre optic cable about ? BS EN 4641-202 is a European product Standard that specifies the general characteristics, conditions for qualification, acceptance, and quality assurance for a fibre optic cable with a 9/125 µm. Single-mode fibre core, 2,74 mm outside cable diameter, and of semi-loose construction. The basic construction is the cable defined in EN 4641-201 with added sheaths for ruggedized usages. Who is BS EN 4641-202 - Fibre optic cable for ? BS EN 4641-202 on fibre optic cable is useful for: Aerospace avionic and fibre optic technology ...
Aerospace series. Cables, optical, 125 μm diameter cladding - Semi-loose, ruggedized simplex construction 9/125 μm SM fibre nominal 2,74 mm outside diameter. Product standard
- ICS
- 49.090
- CCS
- 发布
- 2018-12-31
- 实施
- 2018-12-31
What is BS EN 4641-200 - Fibre optic cable about ? BS EN 4641-200 is a European Standard that specifies the general characteristics, conditions for qualification, acceptance and quality assurance for a fibre optic cable with a 9/125 µm, MM fibre core, and 900 µm outside cable diameter and of semi-loose buffer construction for “inside avionics box” equipment fibre harnessing. Who is BS EN 4641-200 - Fibre optic cable for ? BS EN 4641-200 on fibre optic cable is useful for: Aerospace avionic and fibre optic technology Spacecraft and sp...
Aerospace series. Cables, optical, 125 μm diameter cladding - Semi-loose structure 9/125 μm GI fibre nominal 0,9 mm outside diameter. Product standard
- ICS
- 49.090
- CCS
- 发布
- 2018-11-30
- 实施
- 2018-11-30
This European Standard specifies the required characteristics, test methods, qualification and acceptance conditions of signal data transmission electrical cables.
Aerospace series - Cable, electrical, for digital data transmission - Part 001: Technical specification; German and English version EN 3375-001:2018
- ICS
- 49.090
- CCS
- 发布
- 2018-11-00
- 实施
Aerospace series - Elements of electrical and optical connection - Test methods - Part 100: General
- ICS
- 49.090
- CCS
- 发布
- 2018-08-01
- 实施
Aerospace series - Fibres and cables@ optical@ aircraft use - Test methods - Part 505: Cable tensile strength
- ICS
- 49.090
- CCS
- 发布
- 2018-07-01
- 实施
Aircraft－Mechanical and electromechanical indicators－General requirements
- ICS
- 49.090
- CCS
- 发布
- 2018-01-22
- 实施
Aircraft－Mechanical and electromechanical indicators－General requirements
- ICS
- 49.090
- CCS
- 发布
- 2018-01-22
- 实施
Aircraft－Mechanical and electromechanical indicators－General requirements
- ICS
- 49.090
- CCS
- 发布
- 2018-01-22
- 实施
本标准规定了话音与监视数据记录仪(以下简称记录仪)的技术要求。 本标准适用于记录仪的规划、设计、制造、检测、建设以及使用。
Technical requirement for voice and surveillance data recorder
- ICS
- 49.090
- CCS
- V54
- 发布
- 2018-01-18
- 实施
- 2018-04-01
