53.020.30 起重设备附件 标准查询与下载
共找到 770 条与 起重设备附件 相关的标准，共 52 页
Polyurethane buffer for cranes
- ICS
- 53.020.30
- CCS
- J80
- 发布
- 2017-11-07
- 实施
- 2018-04-01
This European Standard specifies safety requirements for non-fixed load lifting attachments for cranes, hoists and manually controlled load manipulating devices. This standard does not specify the additional requirements for: - non fixed load lifting attachments in direct contact with foodstuffs or pharmaceuticals requiring a high level of cleanliness for hygiene reasons; - hazards resulting from handling specific hazardous materials (e. g. explosives, hot molten masses, radiating materials); - hazards caused by operation in an explosive atmosphere; - hazards caused by noise; - electrical hazards; - hazards due to hydraulic and pneumatic components.
Crane - Safety - Non-fixed load lifting attachments; German and English version prEN 13155:2017
- ICS
- 53.020.30
- CCS
- J80
- 发布
- 2017-11-01
- 实施
This document establishes general principles for the care and maintenance, and inspection and discard of steel wire ropes used on cranes and hoists. In addition to guidance on storage, handling, installation and maintenance, this document provides discard criteria for those running ropes which are subjected to multi-layer spooling, where both field experience and testing demonstrate that deterioration is Significantly greater at the crosSoOver zones On the drum than at any other section of rope in the System It also provides more realistic discard criteria covering decreases in rope diameter and corrosion, and gives amethod for assessingthe combined effect of deterioration at any position in the rope. This document is applicable to those ropes used on the following types of cranes, the majority of which are defined in ISO 4306-1: al cable and portal cable cranes; D) cantilever cranes (pillar jip, wall or walking); C] deck cranes; dj derrick and guy derrick cranes; el derrick cranes with rigid bracing; 们 floating cranes; g) mobile cranes; hj) overhead travelling cranes; 让 portal or semi-portal bridge cranes; portal or semi-portal cranes; 多railway cranes; ]) tower cranes; Imj offshore cranes, i.e. cranes mounted on afixed Structure Supported bythe sea bed or on afloating unit Supported by buoyancy forcesS. This document applies to rope on cranes, winches and hoists used for hook, grabbing, magnet, ladle， excavator Or Stacking duties whether operated manually electrically or hydraulically. It also applies to rope used on hoists and hoist blocks. NOTE In view of the fact that the exclusive use of Synthetic Sheaves or metal Sheaves incorporating Synthetic linings is not recommended when single-layer Spooling at the drum, due to the inevitability of wire breaks occurring internally in large numbers before there is any visible evidqence of any wire breaks or signs of Substantial wear on the periphery ofthe rope, no discard criteria are given for this combination，
Cranes - Wire ropes - Care and maintenance, inspection and discard
- ICS
- 53.020.30
- CCS
- J80
- 发布
- 2017-11-00
- 实施
This document specifies the requirements to safety, including methods of rating and testing single and endless sewn flat woven webbing slings, made of polyamide, polyester and polypropylene man-made fibre webbing in the width range of 25 mm to 100 mm inclusive.
Textile slings - Safety - Disposable flat woven slings, made of man-made fibres
- ICS
- 53.020.30
- CCS
- J80
- 发布
- 2017-10-00
- 实施
Toughness of round steel link chains - Test with sub-size specimens
- ICS
- 53.020.30
- CCS
- J80
- 发布
- 2017-02-01
- 实施
Toughness of round steel link chains. Test with sub-size specimens
- ICS
- 53.020.30
- CCS
- 发布
- 2017-01-31
- 实施
- 2017-01-31
本标准规定了弹簧缓冲器的术语和定义、型式与基本参数、技术要求、试验方法、检验规则、标志、包装、运输和贮存。 本标准适用于起重机用弹簧缓冲器，其他设备在运行过程中或运行至终端时减缓刚性碰撞的缓冲装置参照使用。
Cranes.Spring buffer
- ICS
- 53.020.30
- CCS
- J80
- 发布
- 2016-10-22
- 实施
- 2017-04-01
Crane anti-wind braking device
- ICS
- 53.020.30
- CCS
- J80
- 发布
- 2016-10-22
- 实施
- 2017-04-01
Frequency converter for hoisting machinery
- ICS
- 53.020.30
- CCS
- J80
- 发布
- 2016-10-22
- 实施
- 2017-04-01
Stainless steel resistors for lifting machinery
- ICS
- 53.020.30
- CCS
- J80
- 发布
- 2016-10-22
- 实施
- 2017-04-01
1.1 This specification covers insulating lifting links used for protection of workers positioning a load from accidental contact of the load lifting equipment with live electrical conductors, apparatus, and circuits. 1.2 This specification includes design, material, and testing requirements for the manufacturer and in-service inspection, testing and care requirements for the user or the agent of the user. 1.3 Insulating links whose primary application does not pertain to power line electrical safety are not within the scope of this specification. 1.4 The values stated in SI units are to be regarded as standard. No other units of measurement are included in this standard. 1.5 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.
Standard Specification for Insulating Lifting Links for Load Lifting Equipment Working Near Energized Power Lines
- ICS
- 53.020.30
- CCS
- 发布
- 2016-10-01
- 实施
Forged steel eyebolts grade 4 for general lifting purposes (ISO 3266:2010 + Amd 1:2015); German version EN ISO 3266:2010 + A1:2015
- ICS
- 53.020.30
- CCS
- J13
- 发布
- 2016-05
- 实施
Forged steel eyebots grade 4 for general lifting purposes
- ICS
- 53.020.30
- CCS
- J80
- 发布
- 2016-02-13
- 实施
- 2016-02-13
本标准规定了起重机定子调压调速控制装置的术语和定义、型式与基本参数、技术要求、试验方法、检验规则、标志、包装、运输和贮存。 本标准适用于主回路额定电压为交流、不超过1000V，频率为50Hz或60Hz，控制电路电压不超过250V的起重机定子调压调速控制装置(以下简称控制装置)。
Control device of stator variable voltage for cranes
- ICS
- 53.020.30
- CCS
- J80
- 发布
- 2016-01-15
- 实施
- 2016-06-01
Scope is not provided for this standard
Chain slings assembled by methods other than welding -- Grade T(8)
- ICS
- 53.020.30
- CCS
- 发布
- 2015-12-21
- 实施
