53.060 工业车辆 标准查询与下载
共找到 1313 条与 工业车辆 相关的标准，共 88 页
Industrial tyres and rims Part 3: Rims
- ICS
- 53.060
- CCS
- 发布
- 2022-12-20
- 实施
Scope 1.1 These requirements cover electric battery-powered industrial trucks, such as tractors, platform-lift trucks, fork-lift trucks, and other vehicles designed for specific industrial uses, with respect to a risk of fire, electric shock, and explosion. These requirements do not cover such electric powered industrial trucks with respect to other possible risks that may be associated with the use of such trucks. 1.2 These requirements cover power sources intended for use in the electric powered industrial trucks specified in 1.1, with respect to the risk of fire, electric shock, and explosion. 1.3 These requirements cover Types E, CGH, E or CGH, EE, ES, and EX electric powered industrial trucks.
Electric-Battery-Powered Industrial Trucks
- ICS
- 53.060
- CCS
- 发布
- 2022-12-15
- 实施
本文件规定了锂电池平衡重式叉车的术语和定义、基本参数、技术要求、试验方法、检验规则、标志、随行文件、运输和贮存。
Lithium battery balanced forklift
- ICS
- 53.060
- CCS
- C3650
- 发布
- 2022-12-12
- 实施
- 2022-12-13
本文件规定了叉车用鼓式制动器的术语和定义、基本要求、技术要求、试验方法、检验规则、标识、包装、运输和贮存及质量承诺。 本文件适用于叉车液压驱动制动系统的鼓式制动器（以下简称制动器）。
Drum brakes for forklift truck
- ICS
- 53.060
- CCS
- C343
- 发布
- 2022-12-08
- 实施
- 2023-02-24
Industrial trucks. Safety requirements and verification - Supplementary requirements for self-propelled industrial trucks, other than driverless trucks, variable-reach trucks and burden-carrier trucks
- ICS
- 53.060
- CCS
- 发布
- 2022-09-22
- 实施
- 2022-09-22
本文件规定了叉式自动导引车稳定性验证的术语和定义、试验条件、稳定性验证、稳定性验证判定。 本文件适用于在工厂厂区、物流园区、仓库等场所使用的叉式自动导引车。
Stability verification of fork-type automatic guided vehicle
- ICS
- 53.060
- CCS
- C343
- 发布
- 2022-09-05
- 实施
- 2022-09-06
1 Scope This document specifies methods for inspection and repair of solid-section fork arms in use on all types of fork-lift trucks.
Industrial trucks. Inspection and repair of fork arms in service on forklift trucks
- ICS
- 53.060
- CCS
- 发布
- 2022-08-31
- 实施
- 2022-08-31
1 Scope This document specifies technical characteristics and strength requirements for fork arm extensions and telescopic fork arms for industrial trucks. It applies to fork arm extensions and telescopic fork arms, as defined in ISO 5053‑2, designed for use on industrial trucks and stacking lift trucks, as defined in ISO 5053‑1, having fork arm carriers and, in the case of fork arm extensions, fork arms conforming to ISO 2330. This document does not apply to integral transverse telescopic fork devices or scissor-action reach devices.
Industrial trucks. Fork arm extensions and telescopic fork arms. Technical characteristics and strength requirements
- ICS
- 53.060
- CCS
- 发布
- 2022-08-31
- 实施
- 2022-08-31
产品名称为叉车用钢制车轮，国内现行的标准GB/T 5909-2021商用车辆车轮性能要求和试验方法、JB/T 7155-2016 土方机械 车轮 技术条件、JB/T 5946-2018工程机械涂装通用技术条件/ GB/T 28699-2012 钢结构防护涂装通用技术条件标准中均规定了该产品的标准要求，目前现行的标准已无法满足高端客户对产品技术的要求。本标准旨在提供更加高端、规范、可操作的叉车用钢制车轮的技术要求，解决目前平衡重式叉车钢制车轮生产标准不统一的问题。这对于平衡重式叉车钢制车轮生产企业进一步提高质量监督和控制水平、减少和平衡供需双方风险，保障多点生产的同质化水平都具有较强的现实意义。同时促进车轮行业的壮大及全面发展，规范叉车用钢制车轮的技术要求，使产品实现设计、制造、检验有标准可依。
Steel wheel for counterbalance lift truck
- ICS
- 53.060
- CCS
- C342
- 发布
- 2022-08-25
- 实施
- 2022-09-01
This document specifies technical characteristics and strength requirements for fork arm extensions and telescopic fork arms for industrial trucks. It applies to fork arm extensions and telescopic fork arms, as defined in ISO 5053-2, designed for use on industrial trucks and stacking lift trucks, as defined This document does not apply to integral transverse telescopic fork devices or scissor-action reach devices.
Industrial trucks — Fork arm extensions and telescopic fork arms — Technical characteristics and strength requirements
- ICS
- 53.060
- CCS
- 发布
- 2022-08-12
- 实施
This document specifies methods for inspection and repair of solid-section fork arms in use on all types of fork-lift trucks.
Industrial trucks — Inspection and repair of fork arms in service on fork-lift trucks
- ICS
- 53.060
- CCS
- 发布
- 2022-08-09
- 实施
本文件规定了工业车辆安全监控管理系统的检验与试验的基本要求、项目和方法以及记录。 本文件适用于GB/T 38893所规定的工业车辆安全监控管理系统的检验与试验。 本文件适用于GB/T 6104.1所定义的平衡重式叉车、前移式叉车、侧面式叉车、插腿式叉车、托盘堆垛车和三向堆垛式叉车，其他类型工业车辆可参照使用。
Industrial trucks—Safety monitoring system—Inspection and test specification
- ICS
- 53.060
- CCS
- C343
- 发布
- 2022-08-02
- 实施
- 2022-11-29
1 Scope This document applies to pedestrian propelled industrial platform trucks as defined in 3.1 with a rated capacity up to and including 500 kg, hereinafter referred to as “trucks” and designed for general purposes. This document does not apply to: — shopping trolleys referred to in EN 1929, Parts 1 to 4 and 7 (CEN/TC 291); — roll containers referred to in EN 12674, Parts 1 to 4 (CEN/TC 261); — trucks that are intended to be towed by powered vehicles, e.g. milk-run-trains/trailer trains/tugger trains. This document deals with the technical requirements to minimize the hazards listed in Annex C which can arise during commissioning, operation and maintenance of trucks when carried out in accordance with the specifications as intended by the manufacturer. This document does not specify the additional requirements for: — operation in severe conditions (e.g. extreme environmental conditions such as: freezer applications, high temperatures, corrosive environment); — operation subject to special rules (e.g. potentially explosive atmospheres);
Safety of industrial trucks. Pedestrian propelled industrial platform trucks
- ICS
- 53.060
- CCS
- 发布
- 2022-06-30
- 实施
- 2022-06-30
（一）范围 本标准规定了工业脚轮和单轮的术语和定义、型式、主要参数、试验方法、技术要求、检验规则、标志、包装和贮存。 本标准适用于工业车辆及仪器设备的非动力驱动的移动用脚轮和单轮。本标准不适用于家具、旅行箱等用的脚轮和单轮。 （二）规范性引用文件 （三）术语和定义 脚轮的术语和定义。 （四）型式和主要参数 脚轮的主要参数标注。 （五）支架和单轮试验方法 外观检测和重要部件检测。 （六）脚轮试验方法和技术要求 12种脚轮试验方法和装置、技术要求，试验顺序。 （七）检验规则 （八）标志、包装、运输、贮存
Industrial casters and wheels
- ICS
- 53.060
- CCS
- C343
- 发布
- 2022-06-09
- 实施
- 2022-06-09
BS EN 16307-1 AMD1. Industrial trucks. Safety requirements and verification - Part 1. Supplementary requirements for self-propelled industrial trucks, other than driverless trucks, variable-reach trucks and burden-carrier trucks
- ICS
- 53.060
- CCS
- 发布
- 2022-06-02
- 实施
- 2022-06-02
本文件规定了自动化抓斗门座起重机在使用周期内应进行的检查与维护方面的基本要求。 本文件适用于自动化抓斗门座起重机的检查与维护。
Code of inspection and maintenance for automatic grab portal slewing crane
- ICS
- 53.060
- CCS
- G553
- 发布
- 2022-05-18
- 实施
- 2022-05-19
This document specifies requirements for indicator lights to show the status of freight-container-handling spreaders and grappler arms. It is applicable to: a) container-handling spreaders with twistlocks for handling unladen and/or laden freight containers; b) grappler (bottom lift) arms for handling semi-trailers and swap bodies; when fitted to: — counterbalance lift trucks, with masts, as defined in ISO 5053‑1:2015, 3.3; — rough terrain trucks, with masts, as defined in ISO 5053‑1:2015, 3.7; — non-stacking low-lift straddle carriers, as defined in ISO 5053‑1:2015, 3.18; — stacking high-lift straddle carriers, as defined in ISO 5053‑1:2015, 3.19; — variable-reach trucks, as defined in ISO 5053‑1:2015, 3.20; — rough-terrain variable-reach trucks, as defined in ISO 5053‑1:2015, 3.21; — variable-reach container handlers, "reach stackers", as defined in ISO 5053‑1:2015, 3.23; — counterbalance container handlers, as defined in ISO 5053‑1:2015, 3.24.
Industrial trucks — Specifications for indicator lights for container handling and grappler arm operations
- ICS
- 53.060
- CCS
- 发布
- 2022-05-12
- 实施
本文件规定了固定平台搬运车的术语和定义、一般要求、检验项目及方法、检验记录与报告和检验结论的要求。本文件适用于除道路交通、农用车辆以外仅在工厂厂区等特定区域在用固定平台搬运车的检验，使用单位自行检验参照使用。
Inspection specification for fixed platform truck
- ICS
- 53.060
- CCS
- J 83
- 发布
- 2022-04-19
- 实施
- 2022-05-19
本文件规定了工业用手动托盘搬运车（以下简称托盘车）的术语和定义、 结构参数、基本要求、使用环境条件、 技术要求、试验方法、检验规则、标志、包装、运输和贮存及质量承诺。 本文件适用于额定载荷不大于3 000 kg，货叉上表面最大离地高度不大于300 mm的工业用手动托盘搬运车。
Industrial hand pallet trucks
- ICS
- 53.060
- CCS
- C343
- 发布
- 2022-03-28
- 实施
- 2022-04-08
无人驾驶运输车辆总体技术要求 通信技术要求 线控系统 定位和导航 环境感知 路径规划 无人驾驶运输车辆控制 无人驾驶运输车辆安全保障
General technical specification for driverless trucks in surface mines
- ICS
- 53.060
- CCS
- G5990
- 发布
- 2022-03-22
- 实施
- 2022-03-22
