共找到 1312 条与 工业车辆 相关的标准,共 88 页
This document specifies the tests for verifying the stability of towing tractors, burden and personnel carriers as defined in ISO 5053-1.
Industrial trucks — Verification of stability — Part 17: Towing tractors, burden and personnel carriers
适用于平衡重式叉车、前移式叉车、侧面式叉车、插腿式叉车、托盘堆垛车和三向堆垛式叉车的自行检查
Specifications for self-inspection of forklift users
Industrial trucks — Overhead guards — Specification and testing
Industrial trucks — Inspection and repair of fork arms in service on fork-lift trucks
本文件规定了曳引式别墅电梯的技术要求、试验方法、检验规则、标志、包装与运输、贮存、安装和使用。 本文件适用于电梯在私人住宅中,仅供单一家庭成员使用的电梯。
Traction villa elevator
本文件规定了大型水上游乐设施使用管理的制度建设、人员管理、设备管理、安全评估与报废、应急管理等方面的要求。本文件适用于《特种设备目录》范围内的水上游乐设施的使用管理。《特种设备目录》范围外的水上游乐设施的使用管理可参照执行。
Regulations for the use and management of large-scale water recreation facilities
本文件规定了高效多管射水抽气真空装置的产品结构、型号及技术参数、技术要求、试验方法、检验规则、标志、包装、运输和贮存、使用说明书。 本文件适用于高效多管射水抽气真空装置(以下简称“装置”),本产品主要用于不含固体颗粒、不溶于水、温度一般为-10 ℃~70 ℃气体或汽水混合物的抽吸或输送。
High-efficiency multi-tube water pumping vacuum device
本文件规定了全方位磁导航AGV的技术要求、试验方法、检验规则、标志、包装、运输和贮存。 本文件适用于全方位磁导航AGV(以下简称“AGV小车”)。
Omnidirectional magnetic navigation AGV
Forklift maintenance and self-inspection specifications
本文件规定了大吨位电动平台搬运车的术语和定义、总体架构、基本要求、技术要求、试验方法、检验规则、标志、包装、运输和贮存技术内容。
Large tonnage electric platform truck
本文件规定了后翻式汽车卸车机的术语和定义、产品型式、型号及基本参数、工作原理、要求、检验方法、检验规则、标志、包装、运输和贮存。
Rear tipping truck unloader
(一)范围 本标准规定了工业脚轮和单轮的术语和定义、型式、主要参数、尺寸、试验方法、技术要求、检验规则、标志、包装和贮存。 本标准适用于工业车辆及仪器设备的非动力驱动的移动用脚轮和单轮。 本标准不适用于家具、旅行箱等用的脚轮和单轮。 (二)规范性引用文件 (三)术语和定义 脚轮的术语和定义。 (四)型式、主要参数和尺寸 脚轮的主要参数标注。 (五)支架和单轮试验方法 外观检测和重要部件检测。 (六)脚轮试验方法和技术要求 12种脚轮试验方法和装置、技术要求,试验顺序。 (七)检验规则 (八)标志、包装、运输、贮存
Industrial casters and wheels
(一) 范围 本标准规定了手推医疗仪器脚轮和单轮的术语和定义、型式、主要参数、尺寸、试验方法、技术要求、检验规则、标志、包装和贮存。本标准适用于手推医疗器械及医疗仪器设备的非动力驱动的移动用脚轮和单轮。本标准不适用于医疗病床、康复医疗器材等用的脚轮和单轮。 (二) 规范性引用文件 (三) 术语和定义 (四) 型式、主要参数和尺寸 (五) 支架和单轮试验方法 (六) 脚轮试验方法和技术要求 (七) 检验规则 (八) 标志、包装、运输、贮存
Hand push medical instrument casters and wheels
(一) 范围 本标准规定了物流搬运自动导引车(AGV)从动轮的术语和定义、型式、主要参数、尺寸、试验方法、技术要求、检验规则、标志、包装和贮存。本标准适用于物流搬运非动力驱动的移动用脚轮和单轮。本标准不适用于物流搬运自动导引车(AGV)的主动轮。 (二) 规范性引用文件 (三) 术语 (四) 型式、主要参数和尺寸 (五) 支架和单轮试验方法 (六) AGV从动轮试验方法和技术要求 (七) 检验规则 (八) 标志、包装、运输、贮存
Logistics handling automatic guided vehicle (AGV) driven wheel
Industrial trucks — Verification of stability — Part 25: Rough-terrain variable-reach trucks operating in the special condition of handling freely suspended loads
本文件规定了物流用高升程液压搬运车(以下简称搬运车)的总体要求、技术要求、试验方法、检验规则、标志、包装、运输和贮存。 本文件适用于仓储作业、物流基地、车间工序流转等使用的手动物流用高升程液压搬运车。
High-lift hydraulic truck for logistics
BS ISO 10896-8. Rough-terrain trucks. Safety requirements and verification - Part 8. Requirements for trucks designed for towing
1 Scope This document specifies requirements for the application, inspection, training, maintenance , repair and safe operation (hereafter referred to collectively as the 'safe use') of industrial and rough-terrain lorry-mounted trucks (hereafter referred to as 'trucks') which have design features that allow them to be mounted for transport on a carrier vehicle . This document is intended to achieve the following: — the prevention of personal injuries, property damage and accidents; — the establishment of criteria for inspection, maintenance and operation ; — the establishment of operator training requirements. NOTE National or local requirements can apply.
Industrial trucks. Lorry-mounted trucks - Safe use requirements
Industrial trucks — Sustainability — Part 2: Factors and reporting
Rough-terrain trucks — Safety requirements and verification — Part 8: Requirements for trucks designed for towing
Copyright ©2007-2022 ANTPEDIA, All Rights Reserved
京ICP备07018254号 京公网安备1101085018 电信与信息服务业务经营许可证:京ICP证110310号