55.040 包装材料和辅助物 标准查询与下载

T/SHBX 004-2022 《全生物降解（餐、茶饮外卖及打包用）包装袋》

本文件规定了全生物降解（餐、茶饮外卖及打包用）包装袋（以下简称全生物降解包装袋）的分类，要求，试验方法，检验规则，包装、包装标志、运输和贮存。

Biodegradable (for meals, tea, and take-out) packaging bags

ASTM E2609-08(2022) 刚性聚合物包装的气味或者味道转移或者两者的标准试验方法

1.1 This test method covers a recommended procedure for examining odor or flavor properties or both of rigid polymeric packaging closures and fillable materials. 1.2 This test method can be used for single materials or coextruded materials that are foam molded, injection molded, blow molded, compression molded, or thermoformed polymers. 1.3 The focus of this test method is the evaluation of molded polymer in terms of the transfer of package-related odors, flavors, or both, to water and other model systems (bland food simulants). Rigid packaging forms vary considerably in type, size, and shape. Thus, customizing the exact procedure for dealing with the physical requirements for individual packages is the responsibility of the user. 1.4 This test method assumes testing of the materials at a one-time point; shelf-life testing is not included. 1.5 Refer to Test Method E1870 for the evaluation of inherent odor of packaging material by confinement tests. 1.6 This test method provides sample preparation procedures and two methods of evaluation. 1.6.1 The package performance score method allows for the comparison of any molded polymer sample to another. 1.6.2 The ranking method allows for comparison of samples within the currently tested set only. 1.6.3 The preparation of samples is consistent regardless of the method of evaluation used. 1.7 The values stated in inch-pound units are to be regarded as standard. The values given in parentheses are mathematical conversions to SI units that are provided for information only and are not considered standard. 1.8 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use. 1.9 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

Standard Test Method for Odor or Flavor Transfer or Both from Rigid Polymeric Packaging

T/CAB 0154-2022 液体食品无菌包装用可微波纸基复合材料

规定了液体食品无菌包装用可微波纸基复合材料的外观质量、印刷质量、尺寸偏差、微波加热性能、物理机械性能和安全要求，并给出了相应的试验方法。

Microwavable paper-based laminated material for aseptic packaging of liquid food

ISO 24259:2022 包装用钢带

This document specifies the classification, dimensions, shape, technical requirements, inspection rules and testing methods as well as marking, ordering information and logistics of the steel strapping for packaging. This document is applicable to steel strapping for packaging in the field of metallic material, glass, light industrial products and logistics, etc.

Steel strapping for packaging

ASTM E1975-22 电气设备遮蔽物标准规范S-280/G

1.1 This specification covers one type of lightweight field and mobile shelter designed for transport by cargo truck, fixed or rotary winged aircraft, by rail, and ship, as Shelter, Electrical Equipment S-280/G (see 15.5). 1.2 The values stated in inch-pound units are to be regarded as standard. The values given in parentheses are mathematical conversions to SI units that are provided for information only and are not considered standard. 1.3 The following safety hazards caveat refers only to the test methods described in this specification. This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use. 1.4 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

Standard Specification for Shelter, Electrical, Equipment S-280/G

ASTM F2638-22 用气溶胶过滤测量多孔包装材料作为替代微生物屏障性能的标准试验方法

1.1 This test method measures the aerosol filtration performance of porous packaging materials by creating a defined aerosol of 1.0 µm particles and assessing the filtration efficiency of the material using either single or dual particle counters. 1.2 This test method is applicable to porous materials used to package terminally sterilized medical devices. 1.3 The intent of this test apparatus is to determine the flow rate through a material at which maximum penetration occurs. 1.4 The values stated in SI units are to be regarded as the standard. The values given in parentheses are for information only. 1.5 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use. 1.6 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

Standard Test Method for Using Aerosol Filtration for Measuring the Performance of Porous Packaging Materials as a Surrogate Microbial Barrier

ASTM D4727/D4727M-22 瓦楞和实心纤维板板材（容器级）和切割型材的标准规范

1.1 This specification covers fiberboard primarily used for the fabrication of boxes and interior details such as pads, sleeves, liners, partitions, die-cut sheets, etc. 1.2 The performance of fiberboard boxes is largely dependent on the paper components from which they are fabricated and, in the case of corrugated boxes, on the flute structure as well. Therefore, a variety of grades reflecting varied performance levels are specified. 1.3 The values stated in either inch-pound units or SI units are to be regarded separately as standard. Within the text, the SI units are shown in brackets. The values stated in each system are not exact equivalents; therefore, each system must be used independently of the other. Combining values from the two systems may result in non-conformance with the standard. See IEEE/ASTM-SI-10 for conversion of units. 1.4 The following safety hazards caveat pertains only to the test portion, Sections 8 and 9, of this specification: This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use. 1.5 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

Standard Specification for Corrugated and Solid Fiberboard Sheet Stock (Container Grade) and Cut Shapes

ASTM D5168-22 三壁瓦楞纤维板容器的制造和封闭的标准实施规程

1.1 This practice covers the fabrication and closure of new triple-wall corrugated fiberboard containers. 1.2 This practice indicates the factors and components that must be controlled in the manufacture of triple-wall fiberboard containers. 1.3 The values stated in inch-pound units are to be regarded as standard. The values given in parentheses are mathematical conversions to SI units that are provided for information only and are not considered standard. 1.4 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use. 1.5 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

Standard Practice for Fabrication and Closure of Triple-Wall Corrugated Fiberboard Containers

BB/T 0093-2022 包装材料 无底纸标签

本文件适用于以纸、塑料膜或复合材料为基材，不需要离型材料的不干胶标签。

Packaging Materials Linerless Labels

BB/T 0089-2022 包装用镀氧化铝薄膜

本文件适用于以双向拉伸聚对苯二甲酸乙二醇酯（BOPET）塑料薄膜等为基材，采用真空蒸镀氧化铝法生产的透明镀氧化铝薄膜。

Aluminum oxide film for packaging

BB/T 0090-2022 智能打码机用树脂基碳带

本文件适用于以PET为承印基材的树脂基碳带的生产和验收，其他承印基材可参照使用。

Resin-based Ribbon for Intelligent Coding Machine

T/CPF 0028-2022 产品质量分级及“领跑者”评价要求 激光全息定位纸

本文件规定了激光全息定位纸“领跑者”标准评价的评价指标体系和评价方法及等级划分。

Product quality grading and forerunner evaluation requirements— Laser holographic positioned paper

T/SZJL 001-2022 量热标签技术要求

本文件规定了用于冷链储运全程监测的量热标签产品的技术要求、产品检验、包装和储运要求、现场安装、技术参数变化通知、产品缺陷报告的要求。 本文件所述量热标签适用于疫苗、药品、奶制品、食品等热敏感物品的累计受热量监控。

Calorimetric Label Technical Requirements

T/SZJL 002-2022 量热标签检验方法

本文件规定了量热标签产品的测试要求、测试程序、测试报告、技术参数变化的要求。 本文件所述量热标签适用于疫苗、药品、奶制品、食品等热敏感物品的累计受热量监控。

Calorimetric Label Inspection Method

T/TJWL 005-2022 冷链用热塑性聚氨酯（TPU）冰板

5　技术要求 5.1　原材料 5.2　外观 5.2.1　冷链用TPU冰板外表面干净整洁、无破损脏污，无漏液，封口严实。 5.2.2　常温条件下，冷链用TPU冰板内部为清亮液体。 5.2.3　深冷条件下，冷链用TPU冰板呈固态状。 5.2.4　保冷条件下，冷链用TPU冰板呈冰沙状。 5.2.5　保鲜与保热条件下，冷链用TPU冰板内部为呈液态状。 5.3　颜色 5.4　尺寸与偏差 5.5　蓄冷液含量 5.6　相变温度 5.7　理化性能 5.8　食品安全卫生指标 5.8.1　产品中的蓄冷剂应符合T/TJWL 004-2018中5.2的规定。 5.8.2　TPU基材的全面迁移量不超过10mg/dm3,特定迁移量不超过60mg/kg。

Thermoplastic polyurethane (TPU) ice sheet for cold chain

T/CPF 0026-2021 卷烟保湿保润包装技术要求

本文件规定了卷烟保湿保润包装的分类与结构、质量要求、检验方法、标志、包装、运输和贮存。

Technical requirements for cigarette moisturizing packaging

ASTM D4169-22 船运集装箱和系统性能试验的标准实施规程

1.1 This practice provides a uniform basis of evaluating, in a laboratory, the ability of shipping units to withstand the distribution environment. This is accomplished by subjecting them to a test plan consisting of a sequence of anticipated hazard elements encountered in various distribution cycles. This practice is not intended to supplant material specifications or existing preshipment test procedures. 1.2 Consider the use of Practice D7386 for testing of packages for single parcel shipments. 1.3 The suitability of this practice for use with hazardous materials has not been determined. 1.4 The values stated in inch-pound units are to be regarded as standard. The values given in parentheses are mathematical conversions to SI units that are provided for information only and are not considered standard. 1.5 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use. 1.6 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

Standard Practice for Performance Testing of Shipping Containers and Systems

BB/T 0087-2021 包装材料 激光全息定位纸

Laser holographic positioning paper for packaging materials

T/SHMHZQ 102-2021 包装吸塑制品 质量文件解决技术规范

4 成型流程  5 成型过程中的质量问题  5.1 吸塑不到位  5.2 吸塑过度  5.3 拉线  5.4 厚薄不均  6 解决方案  6.1 基本要求  6.2 吸塑不到位的解决方案  6.3 吸塑过度的解决方案  6.4 拉线的解决方案  6.5 厚薄不均的解决方案

Packing blister product quality document solution technical specification

ASTM F88/F88M-21 柔性屏障材料密封强度的标准试验方法

1.1 This test method covers the measurement of the strength of seals in flexible barrier materials. 1.2 The test may be conducted on seals between a flexible material and a rigid material. 1.3 Seals tested in accordance with this test method may be from any source, laboratory or commercial. 1.4 This test method measures the force required to separate a test strip of material containing the seal. It also identifies the mode of specimen failure. 1.5 This test method differs from Test Method F2824. Test Method F2824 measures mechanical seal strength while separating an entire lid (cover/membrane) from a rigid or semi-rigid round container. 1.6 This test method differs from Test Method F904. Test Method F904 measures the bond strength or ply adhesion of laminates made from flexible materials such as cellulose, paper, plastic film, and foil. 1.7 The values stated in either SI units or inch-pound units are to be regarded separately as standard. The values stated in each system may not be exact equivalents; therefore, each system shall be used independently of the other. Combining values from the two systems may result in non-conformance with the standard. 1.8 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use. 1.9 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

Standard Test Method for Seal Strength of Flexible Barrier Materials